|
k so i cant burn anything...it just stops at 4%
Here is y log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON CD-RW SOHR-4839V>Version: 1G$1 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 1536kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON CD-RW SOHR-4839V>Version: 1G$1 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22JHC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-RW SOHR-4839V atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON CD-RW SOHR-4839V E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 238MB (244464kB)
Free physical memory: 80MB (82132kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2005
CD-ROM (ISO)
4:58:21 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:58:21 PM #2 Text 0 File Burncd.cpp, Line 2948
LITE-ON CD-RW SOHR-4839V
Buffer underrun protection activated
4:58:21 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
4:58:21 PM #4 Text 0 File Writer.cpp, Line 122
Writer LITE-ON CD-RW SOHR-4839V running
4:58:21 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:58:22 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
4:58:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 201462 ( 44:48.12)
4:58:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
4:58:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON CD-RW SOHR-4839V;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
4:58:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:58:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 201463 (201463) = #201463/44:46.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 201461 blocks [LITE-ON CD-RW SOHR-4839V]
--------------------------------------------------------------
4:58:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON CD-RW SOHR-4839V] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 412903424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
201463 | lead-out | 1 | 0x41 | 0x00
4:58:22 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 201463 -> 201461.
4:58:23 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:58:24 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
4:58:24 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:58:24 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)
4:58:24 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:58:24 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
4:59:59 PM #20 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06B10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
4:59:59 PM #21 CDR -1106 File Writer.cpp, Line 311
Power calibration error
4:59:59 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:59:59 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:59:59 PM #24 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
LITE-ON CD-RW SOHR-4839V\H3 T0
4:59:59 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
4:59:59 PM #26 Text 0 File Mmc.cpp, Line 16352
<LITE-ON CD-RW SOHR-4839V> start Close Session
4:59:59 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 11:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 4:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 11:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Quote:
Recorder: <LITE-ON CD-RW SOHR-4839V>Version: 1G$1
- have searched high and low and cannot find any info on this drive, let alone check if it's firmware is up to date or not.
Quote:
Physical memory : 238MB (244464kB)
Free physical memory: 80MB (82132kB)
Memory in use : 66
- you need to free up more memory prior to all burns by closing down more programs
Quote:
Recorder: LITE-ON CD-RW SOHR-4839V;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
- i'm at a loss what to suggest without being able to google search for this drive so i can't even say try different media until we know if the firmware is correct/current
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- see previous comment
Quote:
Power calibration error
- extract from here - Nero.com/eng/FAQs_Error_Messages.html#9" class="korostus" target="_blank">http://www.Nero.com/eng/FAQs_Error_Messages.html#9 - Quote:
9. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
Send the recorder in for service
- all great stuff but again can't prove some of this without being able to verify the firmware
Quote:
Invalid write state
- splat!
Quote:
Burn process failed at 48x (7,200 KB/s)
- i only do 24x max for data and 16x for audio
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
