|
|
|
Constant Burning Errors - Log Included
|
|
|
MarkMero
Newbie
|
6. October 2005 @ 13:36 |
Link to this message
|
|
When attempting to burn a .nrg file (size 3GB) to dvd i received the error below. So far I have been unable to burn anything to dvd since I purchased a Samsung H552U DVD dual layer writer. Please can anyone suggest anything that I can try to correct this issue. Thanks
21:54:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21:54:01 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
21:54:01 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21:54:01 #14 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
21:54:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:55:54 #16 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks
21:55:54 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:55:54 #18 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 19.4x (26,810 KB/s)
21:55:54 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)
21:55:54 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:55:54 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
21:55:54 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
21:55:54 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
21:55:54 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:56:05 #25 Text 0 File Cdrdrv.cpp, Line 1286
21:56:05.680 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
21:57:23 #26 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xE4 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
21:57:23 #27 CDR -1135 File Writer.cpp, Line 311
Write error
21:57:23 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:57:23 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:57:23 #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 254975
21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
|
|
Advertisement
|
 |
|
|
|
Bigfatboy
Member
|
6. October 2005 @ 14:14 |
Link to this message
|
|
please post full log, you are missing half but here is what i see so far
21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)
slow it down, burn at 4x
peace
|
|
MarkMero
Newbie
|
6. October 2005 @ 22:26 |
Link to this message
|
|
Thanks for the suggestion. Just tried it at x4 and it worked fine. Do you reckon that all of my DVD burning will have to be at this speed (the drive & media max is x16)?
|
AfterDawn Addict
|
7. October 2005 @ 02:40 |
Link to this message
|
|
If you post both logs (the bad and the good) it would be very helpful.
|
Moderator
|
7. October 2005 @ 02:49 |
Link to this message
|
|
@attar - don't forget the ugly to go with the good and the bad :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Bigfatboy
Member
|
7. October 2005 @ 06:44 |
Link to this message
|
|
|
|
MarkMero
Newbie
|
7. October 2005 @ 17:25 |
Link to this message
|
Guys, here is the full log. Thanks for all your help so far - i'll also check for a firmware upgrade.
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 59MB (60720kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.9.2005
NeroAPI
19:05:26 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
19:05:26 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
19:05:26 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
19:05:27 #4 Text 0 File Reader.cpp, Line 127
Reader running
19:05:27 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
19:05:27 #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
19:05:27 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
19:05:28 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
19:05:28 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
19:05:58 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 404127 ( 89:48.27, 789MB)
19:05:58 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
19:05:58 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
19:05:58 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
19:05:58 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 404128 (404128) = #404128/89:48.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 404128 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
19:05:58 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 827654144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
404128 | lead-out | 1 | 0x41 | 0x00
19:05:58 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
19:05:58 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
19:05:58 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
19:05:58 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)
19:05:58 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:05:58 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
19:05:58 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
19:05:58 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
19:05:58 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:06:16 #25 Text 0 File Cdrdrv.cpp, Line 1286
19:06:16.887 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
19:07:39 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 404128 (62AA0h), lenght 0 blocks
19:07:39 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:07:39 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 404127
19:08:03 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 16x (22,160 KB/s)
19:08:04 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
19:08:04 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 71MB (73200kB)
Memory in use : 72
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.9.2005
NeroAPI
21:30:14 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
21:30:14 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
21:30:14 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
21:30:18 #4 Text 0 File Reader.cpp, Line 127
Reader running
21:30:18 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
21:30:18 #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
21:30:18 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:30:19 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:30:19 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21:31:27 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1241871 (275:58.21, 2425MB)
21:31:27 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
21:31:27 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
21:31:27 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
21:31:27 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1241872 (1241872) = #1241872/275:58.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1241872 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
21:31:27 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2543353856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1241872 | lead-out | 1 | 0x41 | 0x00
21:31:28 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
21:31:28 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
21:31:28 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
21:31:28 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)
21:31:28 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:31:28 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
21:31:28 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
21:31:28 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
21:31:28 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:31:41 #25 Text 0 File Cdrdrv.cpp, Line 1286
21:31:41.362 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
21:35:10 #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1241872 (12F310h), lenght 0 blocks
21:35:10 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:35:10 #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1241871
21:35:18 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 16x (22,160 KB/s)
21:35:19 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
21:35:19 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Mark
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 76MB (78196kB)
Memory in use : 70
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.9.2005
ISO compilation
21:33:40 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:33:42 #2 Text 0 File Reader.cpp, Line 127
Reader running
21:33:42 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
21:33:42 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
21:33:42 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21:33:42 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1854543 (412:07.18, 3622MB)
21:33:42 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
21:33:43 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
21:33:43 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:33:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1854544 (1854544) = #1854544/412:7.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1854544 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
21:33:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3798106112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1854544 | lead-out | 1 | 0x41 | 0x00
21:33:43 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21:33:44 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
21:33:44 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21:33:44 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)
21:33:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:33:44 #17 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
21:33:44 #18 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
21:33:44 #19 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
21:33:44 #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:34:02 #21 Text 0 File Cdrdrv.cpp, Line 1286
21:34:02.965 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
21:35:34 #22 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03320000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0x1A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
21:35:34 #23 CDR -1135 File Writer.cpp, Line 311
Write error
21:35:34 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:35:43 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:35:44 #26 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 400063
21:35:44 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Mark
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 78MB (80780kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.10.2005
CD-ROM (ISO)
07:04:38 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
07:04:38 #2 Text 0 File Burncd.cpp, Line 2948
TSSTcorp CD/DVDW TS-H552U
Super Link activated
07:04:38 #3 Text 0 File Reader.cpp, Line 127
Reader running
07:04:38 #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
07:04:38 #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
07:04:38 #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
07:05:00 #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275390 ( 61:13.65)
07:05:00 #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
07:05:00 #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
07:05:00 #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
07:05:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 275391 (275391) = #275391/61:11.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 275389 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
07:05:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 564307968, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
275391 | lead-out | 1 | 0x41 | 0x00
07:05:00 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 275391 -> 275389.
07:05:00 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
07:05:01 #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
07:05:01 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
07:05:01 #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 40x (6,000 KB/s)
07:05:01 #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038B5A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
07:05:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
07:05:01 #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
07:07:09 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
07:07:12 #22 Text 0 File Mmc.cpp, Line 16352
<TSSTcorpCD/DVDW TS-H552U> start Close Session
07:07:29 #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 40x (6,000 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Mark
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 82MB (84460kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.10.2005
Burn DVD Image
21:54:00 #1 Text 0 File Reader.cpp, Line 127
Reader running
21:54:00 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
21:54:00 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 3067850752
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=332:50.74 ( 1497824) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <F:\xbox\Gta San Andreas by N-Gage.nrg>
21:54:00 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
21:54:00 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1497823 (332:50.73, 2925MB)
21:54:00 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
21:54:00 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
21:54:00 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:54:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 1497824 (1497824) = #1497824/332:50.74
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1497824 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
21:54:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3067543552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1497824 | lead-out | 1 | 0x41 | 0x00
21:54:00 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
21:54:01 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
21:54:01 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
21:54:01 #14 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
21:54:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:55:54 #16 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks
21:55:54 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:55:54 #18 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 19.4x (26,810 KB/s)
21:55:54 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)
21:55:54 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:55:54 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
21:55:54 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
21:55:54 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
21:55:54 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:56:05 #25 Text 0 File Cdrdrv.cpp, Line 1286
21:56:05.680 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
21:57:23 #26 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xE4 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
21:57:23 #27 CDR -1135 File Writer.cpp, Line 311
Write error
21:57:23 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:57:23 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
21:57:23 #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 254975
21:57:23 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Mark
1A23-3072-8045-7509-9605-6424
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552U E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 68MB (70184kB)
Memory in use : 73
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.10.2005
Burn DVD Image
22:44:28 #1 Text 0 File Reader.cpp, Line 127
Reader running
22:44:28 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
22:44:28 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 3067850752
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=332:50.74 ( 1497824) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <F:\xbox\Gta San Andreas by N-Gage.nrg>
22:44:28 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
22:44:29 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1497823 (332:50.73, 2925MB)
22:44:29 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
22:44:29 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
22:44:29 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:44:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 1497824 (1497824) = #1497824/332:50.74
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1497824 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
22:44:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3067543552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1497824 | lead-out | 1 | 0x41 | 0x00
22:44:29 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
22:44:29 #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
22:44:29 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
22:44:29 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
22:44:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:44:29 #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
22:44:29 #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
22:44:29 #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
22:44:29 #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:44:40 #20 Text 0 File Cdrdrv.cpp, Line 1286
22:44:40.952 - TSSTcorp CD/DVDW TS-H552U\H1 T0 : Queue again later
22:49:55 #21 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 1497824 (16DAE0h), lenght 0 blocks
22:49:55 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:49:55 #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1497823
22:50:09 #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 23/09/2005 21:02:57 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Advertisement
|
|
|
|
Bigfatboy
Member
|
7. October 2005 @ 20:24 |
Link to this message
|
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03
firmware is out of date USO6 is newest
get new firmware here - http://forum.rpc1.org/dl_firmware.php?download_id=2011
the firmware may help your high speed burns, but another thing to look at is your media, quality media is a must try taiyo yuden, verbatim, sony brands
peace
|
|
