|
|
|
Yet another DVD burn process failed =(
|
|
|
BangHatch
Newbie
|
17. October 2005 @ 16:22 |
Link to this message
|
|
So I've searched on others' problems on this, but it seems that it really depends on the situation and log as each situation seems to be quite independent from each other. Please help to as why the burn process fails right away on (or right after) the lead-in.
log file as follows:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 472MB (483700kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.10.2005
ISO compilation
7:47:10 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:47:10 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
7:47:10 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVD+RW GCA-4040N running
7:47:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:47:10 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
7:47:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285759 (507:56.59, 4464MB)
7:47:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
7:47:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1
7:47:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:47:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
7:47:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681236480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285760 | lead-out | 1 | 0x00 | 0x41
7:47:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
7:47:10 PM #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
7:47:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
7:47:10 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5,540 KB/s)
7:47:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:47:10 PM #17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
7:47:10 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 14:17,540 (857540ms) -> OK
7:47:10 PM #19 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes
7:47:25 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03630000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
7:47:25 PM #21 CDR -1135 File Writer.cpp, Line 304
Write error
7:47:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:47:25 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
7:47:26 PM #24 Phase 127 File dlgbrnst.cpp, Line 1845
Generating DVD high compatibility borders
7:47:26 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:47:26 PM #26 Phase 129 File dlgbrnst.cpp, Line 1845
Generating DVD borders completed successfully
7:47:26 PM #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:47:26 PM #28 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
Bigfatboy
Member
|
17. October 2005 @ 17:20 |
Link to this message
|
Nero version: 6.3.1.17
your nero is old 6.6.0.16 is newest
get nero update here - http://ww2.nero.com/nero6/enu/nero-up.php
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17
Make sure your firmware is up to date for your recorder
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
DMA should be on for everything
DMA guide here - http://home.comcast.net/~bbmayo/FAQ.htm
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285759 (507:56.59, 4464MB)
your burning to close to the edge of the disc, set target size to 4300 in your software
peace
This message has been edited since posting. Last time this message was edited on 17. October 2005 @ 17:20
|
|
BangHatch
Newbie
|
18. October 2005 @ 19:49 |
Link to this message
|
So I've updated the firmware to 1.19 and updated the Nero as well.
Followed the instructions to have DMA set to "on", however I can't get the last one to "on" despite following the instructions.
Also did a simple test burn with a tiny amount of data.
STILL FAILED!! :( Could it be just be the solution of changing brands of media?
Most recent fail log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.19 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8026GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom3
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 661MB (677700kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.10.2005
ISO compilation
11:31:37 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:31:38 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
11:31:38 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running
11:31:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:31:38 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:31:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 21567 ( 4:47.42, 42MB)
11:31:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:31:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 1
11:31:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:31:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 21568 (21568) = #21568/4:47.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 21568 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
11:31:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 44171264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
21568 | lead-out | 1 | 0x41 | 0x00
11:31:39 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:31:39 PM #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
11:31:39 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:31:39 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
11:31:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:31:39 PM #17 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R01
Product revision number: 2
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 52 30 31 02 38 ...RICOHJPNR01.8
23 54 37 09 00 3C 67 00 - AC 62 16 18 0B 0B 0A 0B #T7..<g..b......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
11:31:39 PM #18 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
11:31:53 PM #19 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04100000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
11:31:53 PM #20 CDR -1135 File Writer.cpp, Line 311
Write error
11:31:53 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:31:54 PM #22 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:31:54 PM #23 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
11:31:54 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 4:02:55 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 7:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
BangHatch
Newbie
|
19. October 2005 @ 13:43 |
Link to this message
|
|
no one? :(
Please help..
|
|
falcon07
Newbie
|
20. October 2005 @ 00:39 |
Link to this message
|
I had the same problem that you are having just today as a matter of fact. Here's what I did to resolve it. I completly removed the Nero software that was installed. The problem started when I updated recently so I wanted to go back to the first install. I went to the Nero website and downloaded the cleaning tools that they offer and ran those. Then I used programs like CCcleaner, and such and tried to remove all reference to Nero. Then I installed the Nero software that came with the burner and No updates. Then I backed up a DVD with no problems. I am not going to update until some other problem comes along. Hope this helps.
Falcon07
|
AfterDawn Addict
|
20. October 2005 @ 01:16 |
Link to this message
|
|
What media are you using? The log says "medium error", that's a bit of a give away. Especially as it says it on both logs!
Gif by Phantom69
 |
|
Cisco21
Suspended due to non-functional email address
|
20. October 2005 @ 09:35 |
Link to this message
|
i am currently having the same problem i appear to have the latest version of nero6.6.0.16 but it is just a demo. my DMA's are on. i might be burning to close to the edge but on some burns it stops halfway or less. however i am using a laptop sony vaio
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <MATSHITA UJ-831Da> Version: 1.00 - HA 0 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-831Da atapi Port 0 ID 1 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-831Da E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514480kB)
Free physical memory: 132MB (135556kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.10.2005
NeroAPI
2:22:33 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:22:33 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:22:33 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:22:33 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:22:33 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:22:33 PM #6 Text 0 File Writer.cpp, Line 122
Writer MATSHITA UJ-831Da running
2:22:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:22:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:22:34 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:23:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
2:23:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:23:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA UJ-831Da, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
2:23:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
2:23:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MATSHITA UJ-831Da]
--------------------------------------------------------------
2:23:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA UJ-831Da] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
2:23:07 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:23:07 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
2:23:07 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:23:07 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 1x (1,385 KB/s)
2:23:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:23:07 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
2:23:07 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
2:23:07 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
2:23:07 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:42:29 PM #25 SCSI -400 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x14AF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x0B 0x53 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x0B 0x50 0xA0 0x0A
0x00 0x32 0x00 0x00 0x03 0x01
2:42:29 PM #26 CDR -400 File Writer.cpp, Line 311
Unspecified target error
2:42:29 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:42:29 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:42:29 PM #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 742303
2:42:29 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 1x (1,385 KB/s)
2:42:29 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:42:29 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.19E, size=20576 bytes, created 10/21/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
20. October 2005 @ 09:46 |
Link to this message
|
@BangHatch -
you don't need to worry about DMA on that last one, it's one of those virtual drives.
there's nothing wrong in the logfile now so maybe your burning either needs a clean or just doesn't like those discs.
@Cisco21 -
Quote:
Physical memory : 502MB (514480kB)
Free physical memory: 132MB (135556kB)
Memory in use : 73 %
- make sure to close more programs prior to any dvd work
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
- you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Existing drivers:
- your ATAPI drivers aren't listed in this paragraph. fix via this - http://home.comcast.net/~bbmayo/checking%20DMA.pdf
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 09:46
|
|
BangHatch
Newbie
|
20. October 2005 @ 15:01 |
Link to this message
|
|
Ahh Thanks for the replies!
Creaky,
Do you mean to physically clean (as in with a drive cleaner), or do a "clean" as what Falcon07 mentioned?
I've never changed CDR/DVD+R brands before and these were the discs I've been using ever since, and have been burning regularly. It's only now that happened and no longer wants to burn. I hope it just needs to be cleaned.
Thanks very much (again) :)
|
|
Advertisement
|
|
|
Moderator
|
21. October 2005 @ 03:31 |
Link to this message
|
|
@BangHatch - i meant physically as i initially look at things in what might be considered a 'blinkered' fashion, ie i tear a logfile to shreds to rule out all the obvious and go from there..i also do that as it's easier to isolate problems. but all suggestions are good..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
