|
|
|
new to board but came with problem
|
|
|
dakbatch
Newbie
|
19. October 2005 @ 19:17 |
Link to this message
|
|
I use dvd shrink and then it automatically burns with nero, but past few dvd;s i have ran into this problem.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4080 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 541MB (554388kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.10.2005
NeroAPI
6:55:10 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:55:10 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:55:10 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:55:13 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
6:55:13 PM #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4080N running
6:55:13 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:55:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:55:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:55:13 PM #9 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-At-Once, using DVD media
6:58:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
6:58:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
6:58:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
6:58:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not empty. Insert empty disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
6:58:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [HL-DT-ST DVD-RW GWA-4080N]
--------------------------------------------------------------
6:58:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [HL-DT-ST DVD-RW GWA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41
6:58:06 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:58:06 PM #17 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
6:58:06 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:58:06 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
6:58:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:58:06 PM #21 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
6:58:06 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
7:05:20 PM #23 SCSI -1039 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x016F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x0D 0x93 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x00 0x0E 0x09 0x01
7:05:20 PM #24 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error
7:05:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:05:21 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
7:05:48 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
7:05:48 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
7:05:48 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/18/2004 7:10:06 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 02:10
|
|
Advertisement
|
 |
|
|
|
Discmania
Senior Member
2 product reviews
|
19. October 2005 @ 22:56 |
Link to this message
|
|
DMA is not enabled on your burner. Go to control panel - system - hardware - device manager - IDE/ATAPI - right click on primary and secondary channels - select properties - advanced settings - then select DMA instead of PCI if thst is displayed. Then try burning again.
|
|
dakbatch
Newbie
|
19. October 2005 @ 23:46 |
Link to this message
|
|
it says " dma if availible" and it was already on that.
|
AfterDawn Addict
|
20. October 2005 @ 02:09 |
Link to this message
|
Quote:
1A25XXXXXXXXXXXXXXXXX
First, you need to edit out your Nero serial before somebody steal it from you. To edit, click on the little pencil & paper icon on your right hand side on the orange bar.
Quote:
Nero API version: 6.6.0.0
Nero is out of dated, it's 16 versions behind. Update to the latest of Nero 6 (6.6.0.16)
Quote:
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09
I couldn't find any burner that said HL-DT-ST DVD-RW GWA 4080N at forum.rpc1 at all. I only see the GWA4040N, may be you need to google on the net for a firmware update on your burner if yours [0C09] is not the current firmware. Go here for a look around http://forum.rpc1.org/dl_all.php
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
One of your dvd-rom drive or a Toshiba drive DMA is OFF, it needs to be Enable or Available. If you're using XP, then try the following to "uninstall" the Toshiba driver. Once you restart your computer, windows will automatically install it for you.
((( To enable DMA back ON by "uninstalling" it's driver (the DVD-Rom or DVD burner drive) ?for Win XP users? )))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on +sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your DVD-Rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
Quote:
Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01
This is inferior when comparing to high quality media. Try other top notch media such as Taiyo Yuden, Verbatim and Maxell "Made In Japan." Yuden media is also the FUJI & SONY 8X DVD+R "Made In Japan."
Quote:
6:58:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
You're writing too close to the edges, set it to 4300MB or 4360 at the max.
Quote:
7:05:48 PM #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
Slowing it down to 4X, especially if you're not buring with high quality media. It is recommend by most experiences members to backup at 4X only.
This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 02:12
|
|
dakbatch
Newbie
|
20. October 2005 @ 17:22 |
Link to this message
|
thanks for all the info, i did everything you said and right when it went from encoding to burning this errror popped up again..
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.6.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4080 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 577MB (590972kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2005
NeroAPI
6:15:23 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:15:23 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:15:23 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:15:23 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
6:15:23 PM #5 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4080N running
6:15:23 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
6:15:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:15:23 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
6:15:23 PM #9 Text 0 File Burncd.cpp, Line 3119
Turn on Disc-At-Once, using DVD media
6:15:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
6:15:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
6:15:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
6:15:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:15:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVD-RW GWA-4080N]
--------------------------------------------------------------
6:15:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045
Prepare recorder [HL-DT-ST DVD-RW GWA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
6:15:23 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:15:23 PM #17 Text 0 File Burncd.cpp, Line 4135
Cache writing successful.
6:15:23 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:15:23 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
6:15:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:15:23 PM #21 Text 0 File Cdrdrv.cpp, Line 8259
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
6:15:23 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
6:16:05 PM #23 SCSI -1061 File Cdrdrv.cpp, Line 1429
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x2A 0x00 0x00 0x00 0x1A 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
6:16:05 PM #24 CDR -1061 File Writer.cpp, Line 311
Internal target failure
6:16:05 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:16:06 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:16:06 PM #27 SCSI -1061 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
6:16:06 PM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
6:16:06 PM #29 SCSI -1176 File Cdrdrv.cpp, Line 1175
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x00 0x35 0x31 0x0E 0x72 0x03
6:16:06 PM #30 CDR -1061 File WriterStatus.cpp, Line 171
Internal target failure
HL-DT-ST DVD-RW GWA-4080N\H1 T0
6:16:06 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 171
Could not perform end of Disc-at-once
6:16:06 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
6:16:06 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
6:16:06 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/18/2004 7:10:06 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
20. October 2005 @ 19:34 |
Link to this message
|
how did you do ANYTHING the other guys suggested to do, your log file SHOWS that NOTHING has changed whatsoever, i would consider the good advice these guys are giving you and implementing them before you come back with the same question~ :)
also, another thing that REALLY stands out to me is this:
Quote:
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
this is some of the WORST media out there, i would strongly suggest you using better media as this will cause a problem down the road...suggestions for Good Quality Media are in my sig.
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
dakbatch
Newbie
|
20. October 2005 @ 20:32 |
Link to this message
|
i actually did everything he said, but i didnt update it right, my brother just showed me what i did wrong(5 years younger than me:10 years smarter), i went out and got some phillips DVD+R , hope those arnt too cheap. I did unistall the drive like he stated, i did edit my serial out like he stated (thanks a lot for the heads up on that) I am now about to reattempt!
|
|
dakbatch
Newbie
|
20. October 2005 @ 21:42 |
Link to this message
|
|
nope didnt work again, i noticed in the log that dma you pointed out earlier is still off, i did exactly what you said to do though. heres the log please help and thanks in advance!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4080N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 584MB (598256kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.10.2005
NeroAPI
10:39:53 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:39:53 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:39:53 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:39:53 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:39:53 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:39:53 PM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RW GWA-4080N running
10:39:53 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:39:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:39:54 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:39:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
10:39:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:39:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:39:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:39:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVD-RW GWA-4080N]
--------------------------------------------------------------
10:39:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD-RW GWA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
10:39:54 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:39:54 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
10:39:54 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:39:54 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:39:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:39:54 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:39:54 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
10:40:42 PM #23 SCSI -1061 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x2A 0x00 0x00 0x00 0x41 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
10:40:42 PM #24 CDR -1061 File Writer.cpp, Line 311
Internal target failure
10:40:42 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:40:42 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:40:43 PM #27 SCSI -1061 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
10:40:43 PM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
10:40:43 PM #29 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
HL-DT-ST DVD-RW GWA-4080N\H1 T0
10:40:43 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:40:43 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
10:40:43 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:40:43 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/18/2004 7:10:06 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 21:53
|
Moderator
|
21. October 2005 @ 03:25 |
Link to this message
|
|
i see what's happening here, you keep posting the same log entry...you need to post the very LAST entry....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
dakbatch
Newbie
|
21. October 2005 @ 03:59 |
Link to this message
|
|
nOO this is the one that pops up when it says error, after its done enconding and goes to burning.. i swear.. look atg the versions
|
Moderator
|
21. October 2005 @ 04:01 |
Link to this message
|
|
ooops it's my eyes - this is what i was seeing -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
i was just seeing the '6:35:34 PM' bit.
righty ho, shall look more closely this time lol...be right back...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Moderator
|
21. October 2005 @ 04:13 |
Link to this message
|
i may be repeating what alkohol's already said but i've gotta pop out for lunch so ..
Quote:
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09
- the best i can see is this looks like an LG drive, but am having trouble finding firmware. Even went to a proper LG site - http://us.lgservice.com and can't find info on firmware....
Quote:
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On
- you need to beat that DMA into submission...
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
- 4465MB is too close to outer edge of discs;
set target size in DVD Shrink to 4300MB, thus avoiding outer edge of discs and not sacrificing much space
Quote:
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
- oh God. not CMC Mag discs again. these discs are gonna be the end of me. they are foul, horrid, atrocious utter rubbish media.
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing' software which tends to interfere. To get rid of it, uninstall Nero, uninstall completely via Nero's Clean Tools and install the 6.6.0.16 again, this time WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 21. October 2005 @ 04:16
|
|
Discmania
Senior Member
2 product reviews
|
21. October 2005 @ 05:10 |
Link to this message
|
|
DMA is still not available for one of the drives. Check this for BOTH drives again.
|
AfterDawn Addict
|
21. October 2005 @ 08:12 |
Link to this message
|
@dakbatch
You're in good hand here. However, I must say this though; you've got all the seniors (Doc aka Kivory666, Discmania, alkohol [myself]), and including Creaky "a very keen Nero maestro" trying to help you out, but in order to solve your problem, you need to help yourself as well. With that being said, may be take a little consideration and follow what was mentioned? Below is what I see:
First of all and yes... seriously, you need to stop using CMC MAG (this is pure crap media) period. All your logs shows that CMC MAG still exist, try a new batch of high quality media i.e. Taiyo Yuden, Verbatim and Maxell "Made In Japan" or Fuji and Sony "Made In Japan."
Your first log, didn't show that horrible InCD stuff, but the last 2 logs of yours shows that you've installed InCD on your computer.
Again, DMA is OFF here "DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off" -- it needs to be on. Look at previous posted for troubleshoot.
And the rest, Creaky pretty much summed it all.
|
|
dakbatch
Newbie
|
21. October 2005 @ 12:36 |
Link to this message
|
|
ok, i changed teh target device size, bought sony dvd's, i uninstalled the drive again, i tried to look for the firmware no luck,ive uninstalled twice and keep seeing the Incd thing on there, any tips on how making sure that doesnt show up when i uninstall, or should i attempt it with what ive done.
|
AfterDawn Addict
|
21. October 2005 @ 12:43 |
Link to this message
|
|
I noticed hardware error on the log, is your drive going up the swanny? CMC mags are crap, as is philips media!!
Gif by Phantom69
 |
Moderator
|
21. October 2005 @ 12:46 |
Link to this message
|
- InCD is Nero's horrid 'packet writing' software which tends to interfere. To get rid of it, uninstall Nero, uninstall completely via Nero's Clean Tools and install the 6.6.0.16 again, this time WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Discmania
Senior Member
2 product reviews
|
21. October 2005 @ 12:55 |
Link to this message
|
Also try upgrading your aspi layer. Go here and download aspi and install. This will not damage your system but will make sure your aspi layer is correct. Try burning again:-
http://radified.com/ASPI/forceaspi.htm
|
|
dakbatch
Newbie
|
21. October 2005 @ 14:17 |
Link to this message
|
Quote:
I noticed hardware error on the log, is your drive going up the swanny?
i hope not because its a laptop and i have only had it like 6 months!!
|
|
dakbatch
Newbie
|
21. October 2005 @ 15:14 |
Link to this message
|
|
Guys THANKS for all the help, im ripppppppin and burning again like no other! I didnt change the target size at first because i didnt know how and i didnt wanna look like a dumbass asking how, but i found out how by using the search button. I guess all the comments about my cheapness in media got through my thick head. I guess i should have posted in the newby section because i really do not have a clue what is reahhly going on. Again Thanks
This message has been edited since posting. Last time this message was edited on 21. October 2005 @ 15:15
|
AfterDawn Addict
|
21. October 2005 @ 15:49 |
Link to this message
|
|
glad to see you up and running again~ no worries..burn on my friend~ :)
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
|
Advertisement
|
|
|
Moderator
|
21. October 2005 @ 16:53 |
Link to this message
|
|
yay, good work fella, happy burning
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
