|
|
|
Little Help Please
|
|
|
Bael
Newbie
|
20. October 2005 @ 16:36 |
Link to this message
|
Hi recently my nero has being well not working lol....
it's being happening since i upgraded to version 7, and i tried downgrading back to 6...an it happens there to now >:(
what happens is, every time i try to burn a disc i get an error right at the very end, "Could not perform end of Disk-at-once", i thought it maybe my DVD-RW dirve at first, so i went on to try and upgrade my firmware...to get this >:( can someone pelase figure this out for me cus it's fubar'd xD
[IMG]http://img.photobucket.com/albums/v440/Bael/53c83f69.jpg[/IMG]
that would be the Firmware upgrade for my DVD drive >:(
and i know it's not the media....cus i buy the same media everytime, and it's always worked before :'( and i have plenty of RAM so i don't think that should be a problem :S
anyway here's the logfile for the error, hope you guys can help me :)
Bael
[quote="Nero"]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BRS6 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L20 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 3 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S I: CDRom0
HL-DT-ST DVD-ROM GDR8163B J: CDRom1
Generic DVD-ROM M: CDRom2
Generic DVD-ROM N: CDRom3
Generic DVD-ROM O: CDRom4
Generic DVD-ROM P: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 605MB (619724kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.10.2005
ISO compilation
01:27:23 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
01:27:23 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
01:27:23 #3 Text 0 File Reader.cpp, Line 124
Reader running
01:27:23 #4 Text 0 File Writer.cpp, Line 113
Writer I: LITE-ON DVDRW SOHW-1633S running
01:27:23 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
01:27:23 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
01:27:23 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1952687 (433:55.62, 3813MB)
01:27:23 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
01:27:23 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
01:27:23 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:27:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1952688 (1952688) = #1952688/433:55.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1952688 blocks [I: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
01:27:24 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [I: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3999105024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1952688 | lead-out | 1 | 0x41 | 0x00
01:27:32 #13 Text 0 File SCSIPassThrough.cpp, Line 56
Error on LockVolume: Access is denied.
01:27:32 #14 Text 0 File SCSIPassThrough.cpp, Line 104
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
01:27:32 #15 Text 0 File Cdrdrv.cpp, Line 9571
SPTIDismountVolume not successfull
01:27:40 #16 Text 0 File SCSIPassThrough.cpp, Line 56
Error on LockVolume: Access is denied.
01:27:40 #17 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
01:27:40 #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
01:27:40 #19 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
01:27:40 #20 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)
01:27:40 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:27:40 #22 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
01:27:40 #23 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
01:27:40 #24 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
01:27:40 #25 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01:28:09 #26 Text 0 File Cdrdrv.cpp, Line 1195
01:28:09.718 - I: LITE-ON DVDRW SOHW-1633S : Queue again later
01:36:10 #27 Text 0 File WriterStatus.cpp, Line 116
<I: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1952688 (1DCBB0h), length 0 blocks
01:36:10 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
01:36:10 #29 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1952687
01:36:42 #30 SPTI -1194 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 04
Buffer x039ec400: Len x20
01:36:42 #31 CDR -1194 File ThreadedTransferInterface.cpp, Line 1921
PMA update failure
I: LITE-ON DVDRW SOHW-1633S
01:36:42 #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1921
Could not perform end of Disc-at-once
01:36:42 #33 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
01:36:42 #34 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
I: LITE-ON DVDRW SOHW-1633S
01:36:42 #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
01:36:43 #36 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
Car.Mike
AfterDawn Addict
|
20. October 2005 @ 17:21 |
Link to this message
|
Bael ,
Welcome to the forum,
I would guess most of the members will wait until they get the bugs worked out as there already is a screwup w/ the program. If you click from the burning Rom to Xpress and back it locks the program up or something like that.
I would uninstall Nero. Use Add/ remove . Then D/L Nero Cleantools all of them and clean the computer. From what was mentioned on another site this still leaves some registry settings and they have to be manually removes. If you are not familiar w/ the registry then do not do a manual clean.
D/L a Free Registry Cleaner ( Google for one) and after using the clean tools then clean the registry and see what is there.
Now re-boot and reinstall Nero 6 and do not install 7 w/ 6 on the computer in any form. An Update is coming out in a week so just wait
Log errors
1. 01:36:42 #30 SPTI -1194 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Does not like the blank media
2. 01:27:32 #13 Text 0 File SCSIPassThrough.cpp, Line 56
Error on LockVolume: Access is denied.
That error code is a new one on me. I'll have to get back to you on that
3. Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BRS6
Need firmware update to BSOS
Go here: http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=17
EDIT; That second error code is beyond me. Where is Creaky when you need him
This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 17:25
|
|
Bael
Newbie
|
20. October 2005 @ 17:29 |
Link to this message
|
k well i'll just wait for the upgrade in a week see if that fixes anything with 7, if not i'll do the whole clean install of 6 thing :P i'm not in a mad rush to burn anything, just freeing up some hdd space :P
i've never had a problem with this media before.....
lol it's the only media i've ever used :S and this is the first time i've had it fail on me :s
and i tried to upgrade the firmware, i posted a link to a picture in my previous post, this is when i tried to upgrade to BSOS..
http://img.photobucket.com/albums/v440/Bael/53c83f69.jpg
thanx for the reply man :)
|
|
Car.Mike
AfterDawn Addict
|
20. October 2005 @ 17:41 |
Link to this message
|
|
Bael ,
Suggest you run that one by Lite-On as it is Odd. There is a firmware update and yet you can not get the program to detect the burner
|
AfterDawn Addict
|
20. October 2005 @ 19:03 |
Link to this message
|
quick question, where did you purchase your media? this is the Taiyo Yuden coding on a 8x DVD-R media, however, if you got FAKE TAIYO YUDENS with this coding, that just MIGHT be your problem...other than the Nero 7 being problematic, awaiting the "update" or whatnot...i choose personally to stick to Nero 6, because it's solid and i haven't had problems with it as of yet :)
anyways, Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
i have the same drive as well, but, i also know 100% that my TYs are GENUINE...look on the inner hub for a laser coding...it should be in the following format:
GG000xxx (where xxx is the batch number for AUTHENTIC Taiyo Yudens), just wanted to make sure that your media is REAL TYs before troubleshooting further...waiting for creaky's other suggestions as well~ where is Nero master log reader ?? LOL
docTY~
Recommended Media:
Taiyo Yuden 4x dvd-r TYGO1/ 8x dvd-r TYGO2/ 8x dvd+r YUDEN000T02/ 16x dvd+r YUDEN000T03
Verbatim 8x dvd+r MCC003
Verbatim dvd+r DL (MKM001)= flawless no compression backups
"Do Yourself A Favor, Use The Good Stuff
TY & Verbs 4 Life~ :)" ~docTY~
"Its better to be quiet and appear stupid, then to open your mouth and remove all doubt."
I am always prepared to recognize that there can be two points of view - mine and one that is probably wrong - John Gorton
|
Moderator
|
20. October 2005 @ 22:32 |
Link to this message
|
i heard my name across the oceans.... :)
I haven't read the thread yet, got here vi PM so i'll look at logfile first, then read the bits n' bobs after and see if we all meet in the middle..
Quote:
Nero Version: 7.0.0.0 (Nero Express)
- see you're following Car.Mike's suggestions re ditching 7.0 for a while. good idea. i won't go 7.x myself but that's cus 7.x will have nothing i need; i do audio/data cd's so can use Nero 6.x for that, and all my dvd work is done by Shrink/Decrypter so all Nero has to do is burn standard 'dvd-video' compilations, again 7.x isn't gonna help me with anything there.
Quote:
[Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BRS6
- as to the firmware, that's very nearly the problem i had with my 1693S (ugh!). i had the same error "no matched drive detected" except i don't have 422 virtual drives like you!, and the firmware flat out refused and said i didn't have a lite-on. Lite-on are a little slack in the coding of their firmware updates if you ask me..(the only way i could flash the firmware was to hook drive up in my spare pc and flash, then bring it back. but i still couldn't book type the drive so i returned it as faulty. the replacement 1693S did the same. so i don't use Lite-on anymore for now. anyway my point here is get rid of the 422 virtual drives you have there, try the firmware again. if that doesn't work maybe you can flash it in another or someone else's pc).
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- i can see from the port this burner is connected to, that the drive is internal, so this question mark means your ATAPI drivers aren't loaded correctly. See last paragraph as to fixing them
Quote:
DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 3 DMA: Off
- maybe try uninstalling the 422 virtual drives 'til you get everything sorted :)
Quote:
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193/
- this media code will forever more make me ask the same as kivory666, i got stung with FAKE TYG02 (before i knew they were fake) so every time i see them in a log i ask similar questions to kivory666, re their authenticity..
Quote:
Error on LockVolume: Access is denied.
- hmmm, wondering if that needs looking into a little, i have an idea what that might be...see if this helps - http://i5.photobucket.com/albums/y178/creaky/untickcdrecordinginXP.jpg
Quote:
SPTIDismountVolume not successfull
- maybe that's linked to previous error (Nero 7 has a lot more differing error messages than 6.x so am working some of them out as i go along..)
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- let's see if the TYG02 are authentic..
Quote:
PMA update failure
- i interpret this to be a symptom of the other problems, not an error in itself
Quote:
Invalid write state
- splat!
Quote:
Burn process failed at 8x (11,080 KB/s)
- try 4x after sorting all the other things..
Quote:
Existing drivers:
- your ATAPI drivers aren't listed in this paragraph, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 20. October 2005 @ 22:33
|
Senior Member
|
21. October 2005 @ 02:09 |
Link to this message
|
@Bael
Creaky has been all over this log so i can't add much other than i have the same drive as you, and i got the same error as you, when i tried to upgrade my drive to BSOS. I had to go two versions down and install that first. Then i went to the BSOS, and it took. Mine gave the exact same error as you got. My firmware was older than yours, but i made it up to BSOS by doing the Progressive upgrade method. What kept throwing me off was that statement that this firmware is only for: and it lists my drive exactly. Now my litey burns like a forest fire with no problem.
Die CMC Mag!!! |
|
Bael
Newbie
|
21. October 2005 @ 06:59 |
Link to this message
|
@ kivory666
I bought the media from rlsupplies.co.uk i'm guessing they must be fake cus they have no laser coding anywhere on the discs :s but i still don't understand how this can be the problem, when the media has always worked fine in the past xD
@ creaky
I managed to upgrade my firmware, using an unofficial patched version os BSOS, from here:
http://codeguys.rpc1.org/firmwares.html
you can also open there firmware with omnipatcher( http://codeguys.rpc1.org/patchers.html ) and edit thing you want to change...it also fixes soem other stuff with the drive that the original BSOS didn't something to do with the LED...anyway...i flash'd my drive with no problems at all using their FW, and i can now also use the officialy firmware since i updated...but i'm gunna stick with the unofficial one :P
as far as i can tell i upgraded the atapi drivers aswell. ie i found the drivers for my thing using thedevice manager..downloaded..and installed...but i can't tell any difference lol xD...
disabled the virtual drives :P
That box was checked in teh drives properties? should it be? or should i uncheck it?
didn't need to try it at 4x :P it works :D thanx for the help guys :)
@ MaxBurn
I tired to the Progressive upgrade as you suggested, and i downloaded all the firmwares that are available for my drive....and i got the same error with all of them...so i got my hand on an unofficial BSOS FW :) worked liek a charm :) (see above for more details)
think i'm gunna downgrade back to v6 of Nero anyway....not that i ever use the Burning Rom, i always use express...i'd just like to know that i can if i want to lol xD nero7 jus crashes when i try to use the ROM, Only thing i use Nero for anyway is Data and MP3 dvds :P
Thanx Again guys :D you rock :P
Bael
though when i checked my log after it completed succesfully, i still don't have the atapi thing you were talking about :s
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L20 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-00JHA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
HL-DT-ST DVD-ROM GDR8163B J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1279MB (1310192kB)
Free physical memory: 648MB (664500kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.10.2005
ISO compilation
15:39:19 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:39:19 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
15:39:19 #3 Text 0 File Reader.cpp, Line 124
Reader running
15:39:19 #4 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-1633S running
15:39:19 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
15:39:19 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
15:39:20 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1952687 (433:55.62, 3813MB)
15:39:20 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
15:39:20 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
15:39:20 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:39:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1952688 (1952688) = #1952688/433:55.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1952688 blocks [E: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
15:39:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3999105024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1952688 | lead-out | 1 | 0x41 | 0x00
15:39:20 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:39:20 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
15:39:20 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
15:39:20 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
15:39:20 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)
15:39:20 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:39:20 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
15:39:20 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
15:39:20 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
15:39:20 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:39:48 #23 Text 0 File Cdrdrv.cpp, Line 1195
15:39:48.593 - E: LITE-ON DVDRW SOHW-1633S : Queue again later
15:47:51 #24 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1952688 (1DCBB0h), length 0 blocks
15:47:51 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:47:51 #26 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1952687
15:48:17 #27 Phase 37 File dlgbrnst.cpp, Line 1724
Burn process completed successfully at 8x (11,080 KB/s)
15:48:17 #28 Phase 78 File dlgbrnst.cpp, Line 1724
Data verification started
15:57:05 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:57:05 #30 Phase 80 File dlgbrnst.cpp, Line 1724
Data verification completed successfully
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
21. October 2005 @ 10:50 |
Link to this message
|
|
if you're happy for now maybe keep burnig and come back to this thread when you have problems again. which you will if those are fake discs. i used 500 fake TYG02 disks before i knew they were fake. ie they appeared to burn ok but started to play up a few months after being burnt. see 1st link in my sig for the horrors of fake tyg02; however make sure to check the discs in a bright light and look for the codes again as per kivory666. if they're fakes i'd be very careful of buying media TY from them again. if you want genuine discs try www.svp.co.uk...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
Bael
Newbie
|
21. October 2005 @ 13:20 |
Link to this message
|
k can someone explain the difference between DVD-R and DVD+R lol xD
what are the advantages/disadvantages to either?
|
|
