User User name Password  
   
Thursday 24.7.2025 / 21:33
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > digital video > video capturing from analog sources > which wire to transfer is best ?
Show topics
 
Forums
Forums
Which wire to transfer is best ?
  Jump to:
 
Posted Message
jesterhud
Junior Member
_
21. October 2005 @ 07:44 _ Link to this message    Send private message to this user   
Hi all

I am transferring VHS Video onto the Hard Drive then onto DVD.

I know how to do it, just looking for a bit of advice on my set up,
i have a connector box that goes into the Scart on the back on the Video, out of this comes an S-video cable that goes into the Computer, also out of it comes the Red and White Audio wires that ends up as a 3 1/2 mm jack that goes into the Computer, this works ok, but the picture i get recorded has a lot of wavy lines on it that are not on the original.

Is there a better set up i can use, or something to do to clear up the picture ??

Cheers
Advertisement
_
__
Staff Member

2 product reviews
_
22. October 2005 @ 05:05 _ Link to this message    Send private message to this user   
Moved to video capture forum

Rich Fiscus
@Vurbal on Twitter
AfterDawn Staff Writer
Minion
AfterDawn Addict
_
22. October 2005 @ 13:42 _ Link to this message    Send private message to this user   
I don"t Understand Scart Connections very well because we don"t use them in North america but if your VCR has RCA/Composite Outputs then it would be better to Connect RCA/Composite Connectors to your Capture device as Opposed to S-Video because you get signal Degridation when you Convert RCA/Composite to S-Video....Also make sure that your VHS tapes aren"t copy protected (Most retail tapes are) as Copy protection can cause Lines to appear in your captured Video as well as Color Loss......

P-4 2.6ghz (Overclocked to 3.2ghz)
Abit IS7
1gb Dual Chanell DDR 400mhz
Zalman CNPS7000-CU Cooler(Modded with 50cfm Fan)
XFX Gforce 6600GT 128mb GDDR3 (500/1000)
Pinnacle DV500 ADVC Editing Card
RaidMax Scorpio ATX Case + 5 Led
jesterhud
Junior Member
_
23. October 2005 @ 06:42 _ Link to this message    Send private message to this user   
Hi
Thanks for the answer, not sure i understand what you mean by RCA/Composite Outputs, heres what i have on the back of my VCR.

Two Audio out sockets, one red one white.
Two Scart sockets, one marked Euro AV2 IN, One marked Euro AV1 IN/OUT.
One socket marked RF IN
One socket marked RF OUT.

Hope you can picture what i have and maybe help again ??
Minion
AfterDawn Addict
_
23. October 2005 @ 12:55 _ Link to this message    Send private message to this user   
Well those audio Outputs the Red and White ones well here in North america we have a White and Red for Left and Right Audio But we also have one that is Yelow and Caries a Video Signal, These outputs are called RCA or Composite Outputs....

Since i know Nothing about Scart Connections I probably shouldn"t have answered your post and get your hopes up as It seems that None of my north American video Knowlege is Going to help you on your PAL European system.....

Good Luck

P-4 2.6ghz (Overclocked to 3.2ghz)
Abit IS7
1gb Dual Chanell DDR 400mhz
Zalman CNPS7000-CU Cooler(Modded with 50cfm Fan)
XFX Gforce 6600GT 128mb GDDR3 (500/1000)
Pinnacle DV500 ADVC Editing Card
RaidMax Scorpio ATX Case + 5 Led
Nero63
Suspended due to non-functional email address
_
30. October 2005 @ 11:21 _ Link to this message    Send private message to this user   
jesterhud;

In regards to your "wavy lines", might suggest you check tis site for possible answers = www.facetvideo.com
small example of answers to follow




Birds fly, coasters don't

This message has been edited since posting. Last time this message was edited on 30. October 2005 @ 11:27

Advertisement
_
__
 
_
Nero63
Suspended due to non-functional email address
_
30. October 2005 @ 11:25 _ Link to this message    Send private message to this user   
jesterhud;

In regards to your "wavy lines", might suggest you check tis site for possible answers = www.facetvideo.com
A: NOT ALL VIDEO PROBLEMS ARE CAUSED BY COPY PROTECTION. Although the Clarifier? isn't perfect, it absolutely removes the copy protection signals from the video. There are many things that can happen in a video system, especially when recording VHS, that can cause video quality problems. Most of the time, the problem is related to the variation in speed that is inevitable with any video tape. Every component in the system has to be designed to cope with this variability in order to get a good quality recording. Many DVD recorders are not designed with enough flexibility to deal with these speed variations. Add to that the fact that commercially recorded tapes are usually the worst. They are recorded on thin tape that stretches a lot and dubbed at high speed.




Birds fly, coasters don't
afterdawn.com > forums > digital video > video capturing from analog sources > which wire to transfer is best ?
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork