|
|
|
Why I can't burn 1x speed?
|
|
|
Streitti
Newbie
|
22. October 2005 @ 05:12 |
Link to this message
|
|
Yes, why I can't burn my dvds on 1x speed? Only 6x and 8x. The discs support it, the burner supports it. Once i managed to burn on 1x but why not anymore? I'm using dvd+r discs.
|
|
Advertisement
|
|
|
|
Moderator
|
22. October 2005 @ 05:31 |
Link to this message
|
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar. You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Streitti
Newbie
|
22. October 2005 @ 08:08 |
Link to this message
|
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 340MB (348332kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.10.2005
Burn DVD Image
18:10:46 #1 Text 0 File Reader.cpp, Line 127
Reader running
18:10:46 #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
18:10:46 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:10:46 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 713029 (158:27.04, 1392MB)
18:10:46 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
18:10:46 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3
18:10:46 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:10:46 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 713030 (713030) = #713030/158:27.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
18:10:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
713030 | lead-out | 1 | 0x41 | 0x00
18:10:47 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:10:47 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
18:10:47 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:10:47 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8 310 KB/s)
18:10:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:10:48 #15 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
18:10:48 #16 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
18:14:24 #17 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1693S> start writing Lead-Out at LBA 713030 (AE146h), lenght 0 blocks
18:14:24 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:14:48 #19 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 6x (8 310 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18.8.2001 1:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 1:28:09 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4.8.2004 8:59:42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20.12.2003 20:03:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
22. October 2005 @ 08:29 |
Link to this message
|
|
'Fraid you're missing the first section, from that section divider I mentioned...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Streitti
Newbie
|
22. October 2005 @ 08:42 |
Link to this message
|
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.16
Adapter driver: <xmasscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B D: CDRom0
LITE-ON DVDRW SOHW-1693S E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 340MB (348332kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.10.2005
Burn DVD Image
18:10:46 #1 Text 0 File Reader.cpp, Line 127
Reader running
18:10:46 #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
18:10:46 #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:10:46 #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 713029 (158:27.04, 1392MB)
18:10:46 #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
18:10:46 #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3
18:10:46 #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:10:46 #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 713030 (713030) = #713030/158:27.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
18:10:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
713030 | lead-out | 1 | 0x41 | 0x00
18:10:47 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:10:47 #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
18:10:47 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:10:47 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8 310 KB/s)
18:10:48 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:10:48 #15 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
18:10:48 #16 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
18:14:24 #17 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1693S> start writing Lead-Out at LBA 713030 (AE146h), lenght 0 blocks
18:14:24 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:14:48 #19 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 6x (8 310 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18.8.2001 1:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 1:28:09 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4.8.2004 8:59:42 (Adapter driver for rec)
File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20.12.2003 20:03:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Did I get it right this time?
|
|
Advertisement
|
|
|
Moderator
|
22. October 2005 @ 08:58 |
Link to this message
|
...yup, spot on...
...processing...
Quote:
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS04
- firmware's a few versions behind.. KS0B is here - http://forum.rpc1.org/dl_firmware.php?download_id=2056
Quote:
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3
- i'm guessing those a re TDK discs, TDK have a nasty habit of using widely differing quality in manufacturers. those 'MBIPG101' discs are not what i'd call very good quality
Quote:
Burn process completed successfully at 6x (8 310 KB/s)
- i had this same problem with the firmware on this drive. (For a slightly different problem i had 2 of these drives and reported both as faulty then bought LG drives instead). Anyway, the firmware on the 1693S seems to be lacking at the moment, there's a few threads on this, and i had the same problem with MCC003 discs (Verbatim Datalifeplus 8x +R discs; they would only burn at 6x and 8x). i guess you're gonna have to keep checking back at that link for new firmware updates as hopefully Lite-On will get there act together soon.
Here's a couple more links to keep an eye on too -
http://www.liteonit.com/ODD/English/e_downloads/e_firmware_dvd%20...
http://codeguys.rpc1.org/firmwares.html#SOHW-1693S
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 22. October 2005 @ 08:59
|
|
