|
THIS IS THE MESSAGE I AM RECIEVENG WHEN I AM BURNING A DVD RECENTLY IT WAS NOT LIKE THAT BEFORE
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2 (Nero Express)
Recorder: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD-RW GWA-4080N>Version: 0C09 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GWA-4080N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GWA-4080 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 574MB (588532kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.10.2005
===== Disc-Copy over image - 1st step : Copy to image ...
10:09:32 AM #1 CDR -1202 File DriveLocker.cpp, Line 683
Drive is in use of IMAPI
HL-DT-ST DVD-RW GWA-4080N\H1 T0
10:09:32 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
10:09:32 AM #3 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
10:09:32 AM #4 Text 0 File DVDCopy.cpp, Line 241
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2288640 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)
10:09:32 AM #5 Text 0 File DVDCopy.cpp, Line 334
Max -1 tracks of 1 allowed to copy
1: 0 - 2288640 = 2288640, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:09:32 AM #6 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
10:09:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2288639 (508:35.14, 4469MB)
10:09:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
10:09:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
10:09:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:09:32 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2288640 (2288640) = #2288640/508:35.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288640 blocks [ Image Recorder ]
--------------------------------------------------------------
10:09:32 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4687441920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2288640 | lead-out | 1 | 0x00 | 0x41
10:09:32 AM #13 Phase 120 File dlgbrnst.cpp, Line 1800
Creating the image for burning
10:09:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:29:05 AM #15 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2288640 (22EC00h), lenght 0 blocks
10:29:05 AM #16 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:29:06 AM #17 Phase 121 File dlgbrnst.cpp, Line 1800
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
10:29:11 AM #1 Text 0 File Reader.cpp, Line 118
Reader running
10:29:11 AM #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVD-RW GWA-4080N running
10:29:11 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 392474624
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:35.15 ( 2288640)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Kamar Blake\My Documents\TempImage.nrg>
10:29:11 AM #4 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
10:36:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2288639 (508:35.14, 4469MB)
10:36:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
10:36:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVD-RW GWA-4080N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 003, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:36:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
10:36:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2288640 (2288640) = #2288640/508:35.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288640 blocks [HL-DT-ST DVD-RW GWA-4080N]
--------------------------------------------------------------
10:36:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVD-RW GWA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687134720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2288640 | lead-out | 1 | 0x00 | 0x41
10:36:48 AM #11 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (11,040 KB/s)
10:36:48 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:36:48 AM #13 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 4D 43 43 00 00 00 - 00 00 30 30 33 00 38 23 ..MCC.....003.8#
54 37 15 02 52 6C 02 B4 - 63 15 15 0B 0A 08 08 01 T7..Rl..c.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................
10:36:48 AM #14 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 7:11,789 (431789ms) -> OK
10:36:48 AM #15 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes
10:41:14 AM #16 SCSI -1061 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02BD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x2A 0x00 0x00 0x01 0xBE 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
10:41:14 AM #17 CDR -1061 File Writer.cpp, Line 301
Internal target failure
10:41:14 AM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:41:15 AM #19 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:41:15 AM #20 SCSI -1061 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x90
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x00 0x00 0x0E 0x44 0x90
10:41:15 AM #21 Phase 127 File dlgbrnst.cpp, Line 1800
Generating DVD high compatibility borders
10:41:15 AM #22 SCSI -1176 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x00 0x35 0x31 0x0E 0x72 0x03
10:41:15 AM #23 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
10:41:15 AM #24 CDR -1061 File WriterStatus.cpp, Line 164
Internal target failure
HL-DT-ST DVD-RW GWA-4080N\H1 T0
10:41:15 AM #25 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
10:41:15 AM #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
10:41:16 AM #27 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (11,040 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 5/2/2003 11:37:32 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 12:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
