|
|
|
Nero won't burn DVD's with "Command Sequence Error"
|
|
|
ecetron
Newbie
|
29. October 2005 @ 12:42 |
Link to this message
|
|
I've just gotten a Samsung TS-H552U drive and I can't get a single DVD to burn. Here is the latest log (note I've tried 4x with identical results -- lots of coasters)
------------------------------------------------
Edward J Cetron
The Cetron Family
1A20-xxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.16
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : CD-R/RW CW099D CD-R/RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
CD-R/RW CW099D CD-R/RW D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom1
AXV CD/DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785908kB)
Free physical memory: 458MB (469104kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.10.2005
Burn DVD Image
15:59:44 #1 Text 0 File Reader.cpp, Line 127
Reader running
15:59:44 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
15:59:44 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\etejc\My Documents\Nero Temp\Copy of TempImage.nrg>
15:59:44 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using DVD-R/RW media
15:59:44 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2187839 (486:11.14, 4273MB)
15:59:44 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
15:59:44 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: MXL RG - 03
Disc Application Code: 64, Disc Physical Code: 193
15:59:44 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:59:44 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [TSSTcorp CD/DVDW TS-H552U]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12288 + 32 (32) = #12320/2:44.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [TSSTcorp CD/DVDW TS-H552U]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12320 + 256 (256) = #12576/2:47.51
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 240 blocks [TSSTcorp CD/DVDW TS-H552U]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12576 + 2175248 (2175248) = #2187824/486:10.74
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2175232 blocks [TSSTcorp CD/DVDW TS-H552U]
4: TRM_DATA_MODE1 (5 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2187824 + 16 (16) = #2187840/486:11.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
15:59:45 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25165824 25231360, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25231360 25231360 25755648, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 25755648 25755648 4480663552, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 4480663552 4480663552 4480696320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12288 | 2 | 0 | 0x41 | 0x00
12288 | 2 | 1 | 0x41 | 0x00
12320 | 3 | 0 | 0x41 | 0x00
12320 | 3 | 1 | 0x41 | 0x00
12576 | 4 | 0 | 0x41 | 0x00
12576 | 4 | 1 | 0x41 | 0x00
2187824 | 5 | 0 | 0x41 | 0x00
2187824 | 5 | 1 | 0x41 | 0x00
2187840 | lead-out | 1 | 0x41 | 0x00
15:59:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.
15:59:45 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 2. Length: 32 -> 16.
15:59:45 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 3. Length: 256 -> 240.
15:59:45 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 4. Length: 2175248 -> 2175232.
15:59:45 #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
15:59:45 #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
15:59:45 #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
15:59:45 #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
15:59:45 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
15:59:45 #20 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
15:59:45 #21 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
15:59:45 #22 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
15:59:45 #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:59:56 #24 Text 0 File Cdrdrv.cpp, Line 1286
15:59:56.761 - TSSTcorp CD/DVDW TS-H552U\H1 T1 : Queue again later
16:00:05 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:00:06 #26 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 1: Last written address was 12271
16:00:06 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288
16:00:06 #28 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
16:00:06 #29 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
16:00:06 #30 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 12288
DVD high compatibility mode: No
16:00:06 #31 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:00:07 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:00:10 #33 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 2: Last written address was 12303
16:00:10 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12320): write at #12320
16:00:10 #35 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
16:00:10 #36 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
16:00:10 #37 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 12320
DVD high compatibility mode: No
16:00:10 #38 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:00:10 #39 SCSI -1023 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xF0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
16:00:10 #40 CDR -1023 File ThreadedTransferInterface.cpp, Line 2059
Command sequence error
16:00:10 #41 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2059
Could not perform StartTrack
16:00:10 #42 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x1C 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
16:00:10 #43 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
16:00:10 #44 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
16:00:10 #45 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
16:00:10 #46 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xDC 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
16:00:10 #47 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
16:00:10 #48 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
16:00:10 #49 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 4/10/2000 08:10:56
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 4/10/2000 08:10:56
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 01:59:42 (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 09:33:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
----------------------------------------------
Any and all suggestions are greatly welcomed... I've used Nero 5.x reliably on the CD-RW drive and this PC for a long time, but upgraded with the OEM version of 6.3. something and then to 6.6 as part of the first level debugging. I've also used the Nero Clean tools before installation... And checked all the obvious things like Maxell media, DMA on, plenty of memory etc...
Thanks
-ed
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
29. October 2005 @ 18:34 |
Link to this message
|
Are you burning a multitrack DVD intentionally? What are you trying to burn?
From the log I see you were using Track-At-Once.
It's usually better to complile everything together on your HDD and then burn in a Disc-At-Once mode.
Apparently Nero started and then wrote the first couple of tracks and then failed for some kind of scsi illegal request. Sense Code 05 is always a tough one and can be caused by all kinds of system and software problems
Some burners are not up to Track-At-Once operations with DVDs from what I've read. So your new burner may not be up for these kinds of operations.
You have enough data listed (4273MB) to where I'm thinking this might even be a movie you are trying to burn. If so you have to do things just a bit differently from what the Nero log indicates.
|
Moderator
|
30. October 2005 @ 02:08 |
Link to this message
|
..a couple more things too....
Quote:
Burn process failed at 8x (11,080 KB/s)
- try 4x, most ppl recommend 4x
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 4/10/2000 08:10:56
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/4/2004 01:59:42 (Adapter driver for rec
- CDRALW2K.SYS is part of Roxio, which tends to interfere with Nero. uninstall Roxio, and you may have to google search for 'Roxio Zapper' to fully uninstall Roxio.
Also, the atapi drivers have question marks for the version number, so your atapi drivers aren't correctly loaded, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
ecetron
Newbie
|
30. October 2005 @ 16:38 |
Link to this message
|
Thanks for the replies... I've run Roxio Zapper and, after booting several times to the Recovery Console, got the atapi.sys issue resolved as well. I also tried it again at 4x... no such luck. I'm doing Track-at-once since I guess I did the original image as TAO... and I am duping the DVD from the saved HDD image.
The original DVD is a "movie" DVD. Actually it is a long (almost 3 hour) recording from my Tivo system. It was done on a Sony Digital Recorder with the Analog input from the Tivo. I'm open to any suggestions on a better way to duplicate it.
Thanks again
-ed
Here is the latest log:
Edward J Cetron
The Cetron Family
1A20-
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <CD-R/RW CW099D CD-R/RW >Version: 13SM - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : CD-R/RW CW099D CD-R/RW atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
CD-R/RW CW099D CD-R/RW D: CDRom0
TSSTcorp CD/DVDW TS-H552U E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785908kB)
Free physical memory: 447MB (458172kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.10.2005
Burn DVD Image
20:23:42 #1 Text 0 File Reader.cpp, Line 127
Reader running
20:23:42 #2 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW TS-H552U running
20:23:42 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\etejc\My Documents\Nero Temp\Copy of TempImage.nrg>
20:23:42 #4 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using DVD-R/RW media
20:23:42 #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2187839 (486:11.14, 4273MB)
20:23:42 #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
20:23:42 #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R
Disc Manufacturer: MXL RG - 03
Disc Application Code: 64, Disc Physical Code: 193
20:23:42 #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:23:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [TSSTcorp CD/DVDW TS-H552U]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12288 + 32 (32) = #12320/2:44.20
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [TSSTcorp CD/DVDW TS-H552U]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12320 + 256 (256) = #12576/2:47.51
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 240 blocks [TSSTcorp CD/DVDW TS-H552U]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12576 + 2175248 (2175248) = #2187824/486:10.74
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2175232 blocks [TSSTcorp CD/DVDW TS-H552U]
4: TRM_DATA_MODE1 (5 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2187824 + 16 (16) = #2187840/486:11.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [TSSTcorp CD/DVDW TS-H552U]
--------------------------------------------------------------
20:23:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25165824 25231360, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25231360 25231360 25755648, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 25755648 25755648 4480663552, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 4480663552 4480663552 4480696320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12288 | 2 | 0 | 0x41 | 0x00
12288 | 2 | 1 | 0x41 | 0x00
12320 | 3 | 0 | 0x41 | 0x00
12320 | 3 | 1 | 0x41 | 0x00
12576 | 4 | 0 | 0x41 | 0x00
12576 | 4 | 1 | 0x41 | 0x00
2187824 | 5 | 0 | 0x41 | 0x00
2187824 | 5 | 1 | 0x41 | 0x00
2187840 | lead-out | 1 | 0x41 | 0x00
20:23:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.
20:23:42 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 2. Length: 32 -> 16.
20:23:42 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 3. Length: 256 -> 240.
20:23:42 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 16 run-out blocks from end of track 4. Length: 2175248 -> 2175232.
20:23:43 #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:23:43 #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
20:23:43 #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:23:43 #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
20:23:43 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:23:43 #20 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
20:23:43 #21 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
20:23:43 #22 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No
20:23:43 #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:23:55 #24 Text 0 File Cdrdrv.cpp, Line 1286
20:23:55.148 - TSSTcorp CD/DVDW TS-H552U\H1 T1 : Queue again later
20:24:02 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:24:04 #26 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 1: Last written address was 12271
20:24:04 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288
20:24:04 #28 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
20:24:04 #29 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
20:24:04 #30 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 12288
DVD high compatibility mode: No
20:24:05 #31 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:24:05 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:24:09 #33 Text 0 File DVDMinusRW.cpp, Line 515
EndTrack 2: Last written address was 12303
20:24:09 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12320): write at #12320
20:24:09 #35 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession
20:24:09 #36 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Super Link -> ON
20:24:09 #37 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 12320
DVD high compatibility mode: No
20:24:09 #38 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:24:09 #39 SCSI -1023 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xF0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
20:24:09 #40 CDR -1023 File ThreadedTransferInterface.cpp, Line 2059
Command sequence error
20:24:09 #41 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2059
Could not perform StartTrack
20:24:09 #42 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x2C 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
20:24:09 #43 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
20:24:09 #44 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
20:24:09 #45 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
20:24:09 #46 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xDC 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
20:24:09 #47 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
20:24:09 #48 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
20:24:09 #49 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 4/10/2000 07:10:56
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 01:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
31. October 2005 @ 08:50 |
Link to this message
|
Quote:
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 4/10/2000 07:10:56
- 'fraid you've still got part of Roxio installed there...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
ecetron
Newbie
|
31. October 2005 @ 15:16 |
Link to this message
|
|
ARGGGHHHH -- finally killed the last of the Roxio... but no change at all (except the last lines in the Log file don't mention any Roxio drivers).... Do I try DVD+R's? Recopy the Image file as Disk at Once? Approach duplicating this type of DVD a different way?
Thanks,
-ed
|
|
