|
|
|
Errors using Nero burning Rom
|
|
|
dvdjammer
Newbie
|
3. November 2005 @ 14:57 |
Link to this message
|
|
After stripping a movie and using shrink to fit it to a dvd. I use
Nero Burning rom to copy it, but after starting burn, errors that say
invalid block address or communication error occur. Can anyone fill me in on what these problems come from. My burner is a Nec, ND-1300A, my computer 2800AMD, 2gig ram, 200 gig HD, with XP installed on it.Thanks
This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 14:40
|
|
Advertisement
|
|
|
|
|
Bigfatboy
Member
|
3. November 2005 @ 18:11 |
Link to this message
|
post your Nero log here
find your log here - C:\Program Files\Ahead\Nero\NeroHistory.txt
edit your serial # out it starts with 1A23 or similar
peace
|
|
dvdjammer
Newbie
|
6. November 2005 @ 15:14 |
Link to this message
|
********** Nero Recode 2 **********
Version: 2.2.6.17
terry
1a2300067130121686327672
Project type: Copy entire DVD
Target size: DVD5 (2282925)
19:31:37 File LangStreamPatcher.cpp, Line 56
Command table patching started...
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 1 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 3 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 4 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTSM_PGCI_UT - LU 1 - PGC 12 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 1 - VTS_PGCITI - PGC 1 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTSM_PGCI_UT - LU 1 - PGC 1 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTSM_PGCI_UT - LU 1 - PGC 3 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTSM_PGCI_UT - LU 1 - PGC 4 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTSM_PGCI_UT - LU 1 - PGC 12 patched!
19:31:37 File LangStreamPatcher.cpp, Line 101
VTS 2 - VTS_PGCITI - PGC 1 patched!
19:31:37 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: _NEC DVD_RW ND-1300A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\terry (53553692672 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
19:31:42 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [6 vobus] 0.65MB -> 0.65MB [R 1.00]
Video: 0.64MB, extra: 0.01MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.00MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [15 vobus] 2.69MB -> 2.69MB [R 1.00]
Video: 2.50MB, extra: 0.19MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.16MB [enabled]
VTS_01 Title Vobs [12937 vobus] 2197.73MB -> 2032.36MB [R 1.00]
Video: 1464.19MB, extra: 568.17MB
Audio: 3 streams
0. 0. Dolby Digital 2-ch English 162.31MB [enabled]
1. 1. Dolby Digital 5.1-ch English 376.54MB [enabled]
2. 2. Dolby Digital 2-ch French 161.43MB [disabled]
Subpicture: 3 streams
0. 0. English - Normal Captions 4.05MB [enabled]
1. 1. Spanish 3.66MB [disabled]
2. 2. French 0.28MB [disabled]
VTS_02 Menus Vobs [15 vobus] 2.69MB -> 2.69MB [R 1.00]
Video: 2.50MB, extra: 0.19MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.16MB [enabled]
VTS_02 Title Vobs [12938 vobus] 2259.91MB -> 2094.63MB [R 1.00]
Video: 1527.02MB, extra: 567.61MB
Audio: 3 streams
0. 0. Dolby Digital 2-ch English 161.56MB [enabled]
1. 1. Dolby Digital 5.1-ch English 376.74MB [enabled]
2. 2. Dolby Digital 2-ch French 161.37MB [disabled]
Subpicture: 3 streams
0. 0. English - Normal Captions 4.05MB [enabled]
1. 1. Spanish 3.62MB [disabled]
2. 2. French 0.28MB [disabled]
19:31:42 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
19:31:42 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R
19:31:42 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2283086 sectors (2295104)
19:31:43 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283086 sectors (2116281 required)
19:31:43 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.15MB (4133.36MB obtained)
19:31:43 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
19:31:43 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.65MB -> Expected 0.65MB -> Output 0.65MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 6
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.01MB
Source video size = 0.64MB
Pictures Modified [I 0] [P 0] [B 0]
19:31:43 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 2.69MB -> Expected 2.69MB -> Output 2.69MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 15
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.19MB
Source video size = 2.50MB
Pictures Modified [I 0] [P 0] [B 0]
19:34:06 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_2.VOB
19:34:54 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 2197.73MB -> Expected 2032.36MB -> Output 2032.36MB
Finished error 0.00MB
Ratio encoded = 3412
Original encoded = 9524
Slide encoded = 1
StillImage encoded = 0
Output extra size = 538.56MB
Source video size = 1503.13MB
Pictures Modified [I 1151] [P 27] [B 25426]
19:35:11 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Menus Vobs
VTS_02 Menus Vobs:
Original 2.69MB -> Expected 2.69MB -> Output 2.69MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 13
Slide encoded = 2
StillImage encoded = 0
Output extra size = 0.19MB
Source video size = 2.50MB
Pictures Modified [I 2] [P 0] [B 0]
19:37:33 File NeroRecorder.cpp, Line 593
Added extra file VTS_02_2.VOB
19:38:28 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 2259.91MB -> Expected 2094.63MB -> Output 2094.64MB
Finished error 0.00MB
Ratio encoded = 3393
Original encoded = 9544
Slide encoded = 1
StillImage encoded = 0
Output extra size = 538.56MB
Source video size = 1565.31MB
Pictures Modified [I 1508] [P 178] [B 24902]
19:38:44 File NeroRecorder.cpp, Line 593
Added extra file VTS_02_3.VOB
19:38:45 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (4133.36MB)
19:38:45 File NeroRecorderBase.cpp, Line 1096
Burning 14 files with total size of 4334145536 bytes on hard disk
19:38:45 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1828MB (1871948kB)
Memory in use : 20
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2005
NeroAPI
7:38:45 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
7:38:45 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
7:38:45 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
7:38:45 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
7:38:45 PM #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
7:38:45 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:38:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:38:45 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:38:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2116831 (470:24.31, 4134MB)
7:38:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:38:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
7:38:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:38:45 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2116832 (2116832) = #2116832/470:24.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2116832 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
7:38:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4335271936, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2116832 | lead-out | 1 | 0x41 | 0x00
7:38:45 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
7:38:45 PM #16 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
7:38:45 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
7:38:45 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
7:38:45 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:38:45 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AF80600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:38:45 PM #21 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
7:38:53 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07A30000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
7:39:00 PM #23 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07A50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
7:39:00 PM #24 CDR -1024 File Writer.cpp, Line 311
Communication failure
7:39:00 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:39:00 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:40:50 PM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
7:40:50 PM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
7:40:50 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
19:40:54 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
19:40:54 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
|
dvdjammer
Newbie
|
6. November 2005 @ 15:21 |
Link to this message
|
terry
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0A - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0A nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1836MB (1880956kB)
Memory in use : 20
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.11.2005
UDF/ISO compilation
8:28:45 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:28:45 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
8:28:45 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
8:28:45 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
8:28:45 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
8:28:45 PM #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
8:28:45 PM #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
8:28:45 PM #8 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
8:28:45 PM #9 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:28:45 PM #10 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:28:45 PM #11 Text 0 File Reader.cpp, Line 127
Reader running
8:28:45 PM #12 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
8:28:45 PM #13 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:28:45 PM #14 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:28:45 PM #15 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:28:46 PM #16 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2222815 (493:57.40, 4341MB)
8:28:46 PM #17 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:28:46 PM #18 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
8:28:46 PM #19 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:28:46 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2222816 (2222816) = #2222816/493:57.41
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222816 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
8:28:46 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4552327168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2222816 | lead-out | 1 | 0x41 | 0x00
8:28:46 PM #22 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:28:46 PM #23 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
8:28:46 PM #24 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:28:46 PM #25 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:28:46 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:28:46 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:28:46 PM #28 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
8:29:01 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:29:07 PM #30 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
8:29:07 PM #31 CDR -1024 File Writer.cpp, Line 311
Communication failure
8:29:07 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:29:07 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:30:58 PM #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
8:30:58 PM #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
8:30:58 PM #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0A - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0A nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1800MB (1843396kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.11.2005
NeroAPI
9:41:57 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:41:57 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:41:57 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:41:57 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:41:57 PM #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
9:41:57 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:41:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:41:57 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:41:57 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:41:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
9:41:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
9:41:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
9:41:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:41:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
9:41:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
9:41:58 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:41:58 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
9:41:58 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:41:58 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
9:41:58 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:41:58 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x14C80600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:41:58 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
9:42:09 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x144D0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
9:42:17 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x14510000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
9:42:17 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure
9:42:17 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:42:17 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:44:07 PM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
9:44:07 PM #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
9:44:07 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
9:44:07 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:44:07 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
terry
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0A - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0A nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1827MB (1871764kB)
Memory in use : 20
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2005
UDF/ISO compilation
6:16:29 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:16:29 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
6:16:29 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
6:16:29 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
6:16:29 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
6:16:29 PM #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
6:16:29 PM #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
6:16:29 PM #8 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
6:16:29 PM #9 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:16:29 PM #10 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:16:29 PM #11 Text 0 File Reader.cpp, Line 127
Reader running
6:16:29 PM #12 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
6:16:29 PM #13 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:16:30 PM #14 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:16:30 PM #15 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:16:30 PM #16 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2233855 (496:24.55, 4362MB)
6:16:30 PM #17 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:16:30 PM #18 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
6:16:30 PM #19 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:16:30 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2233856 (2233856) = #2233856/496:24.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233856 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
6:16:30 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574937088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2233856 | lead-out | 1 | 0x41 | 0x00
6:16:30 PM #22 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:16:30 PM #23 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
6:16:30 PM #24 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:16:30 PM #25 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:16:30 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:16:30 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:16:30 PM #28 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
6:16:45 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:16:52 PM #30 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
6:16:52 PM #31 CDR -1024 File Writer.cpp, Line 311
Communication failure
6:16:52 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:16:52 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:18:42 PM #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:18:42 PM #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:18:42 PM #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
terry
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom3
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1874MB (1919836kB)
Memory in use : 18
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2005
UDF/ISO compilation
6:53:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:53:20 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
6:53:20 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
6:53:20 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
6:53:20 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
6:53:20 PM #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
6:53:20 PM #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
6:53:20 PM #8 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
6:53:20 PM #9 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:53:20 PM #10 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:53:20 PM #11 Text 0 File Reader.cpp, Line 127
Reader running
6:53:20 PM #12 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
6:53:20 PM #13 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:53:20 PM #14 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:53:20 PM #15 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:53:20 PM #16 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2233855 (496:24.55, 4362MB)
6:53:20 PM #17 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:53:20 PM #18 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
6:53:20 PM #19 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:53:20 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2233856 (2233856) = #2233856/496:24.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2233856 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
6:53:20 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4574937088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2233856 | lead-out | 1 | 0x41 | 0x00
6:53:20 PM #22 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:53:20 PM #23 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
6:53:20 PM #24 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:53:20 PM #25 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:53:20 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:53:20 PM #27 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:53:20 PM #28 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
6:53:36 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:53:41 PM #30 SCSI -1064 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
6:53:41 PM #31 CDR -1064 File Writer.cpp, Line 311
Invalid block address
6:53:41 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:53:41 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:55:32 PM #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:55:32 PM #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:55:32 PM #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
terry
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1756MB (1798828kB)
Memory in use : 23
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2005
DVD-Copy on the fly
8:42:04 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
8:42:04 AM #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
8:42:04 AM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x04 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
8:42:04 AM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
8:42:04 AM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:42:05 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
8:42:05 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:42:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
8:42:05 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:42:05 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
8:42:05 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
8:42:05 AM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:42:05 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:42:05 AM #14 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C430600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:42:05 AM #15 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
9:06:07 AM #16 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
9:06:07 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:06:25 AM #18 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1732MB (1773788kB)
Memory in use : 24
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2005
NeroAPI
10:48:04 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:48:04 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:48:04 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:48:04 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:48:04 AM #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
10:48:04 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:48:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:48:04 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:48:04 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:48:04 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
10:48:04 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:48:04 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
10:48:04 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:48:04 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
10:48:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
10:48:05 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:48:05 AM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
10:48:05 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:48:05 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:48:05 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:48:05 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x14E70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:48:05 AM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
10:48:12 AM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x11DD0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:48:20 AM #24 SCSI -1064 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x11DE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
10:48:20 AM #25 CDR -1064 File Writer.cpp, Line 311
Invalid block address
10:48:20 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:48:20 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:50:10 AM #28 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
10:50:10 AM #29 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
10:50:10 AM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
10:50:10 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:50:10 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
terry
1a2300067130121686327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1844MB (1888832kB)
Memory in use : 19
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2005
UDF/ISO compilation
5:39:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:39:20 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:39:20 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:39:20 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:39:20 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:39:20 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
5:39:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:39:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:39:20 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:39:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
5:39:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
5:39:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
5:39:21 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:39:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
5:39:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
5:39:21 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:39:21 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
5:39:21 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:39:21 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:39:21 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:39:21 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A70600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
5:39:21 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
5:39:28 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
5:39:34 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
5:39:34 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure
5:39:35 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:39:35 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:41:25 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
5:41:25 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
5:41:25 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Bigfatboy
Member
|
6. November 2005 @ 15:59 |
Link to this message
|
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0B
firmware is old, 1.0C is newest
get new firmware here - http://forum.rpc1.org/dl_firmware.php?download_id=1517
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0B nvidesm Port 0 ID 1 DMA: Off
DMA should be on for everything
DMA guide here - http://home.comcast.net/~bbmayo/FAQ.htm
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
your burning to close to the edge of the disc, in shrink set target size to 4300 or 4350
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
InCD causes probs, uninstall Nero, then use Nero clean tools to remove it completely, install Nero without InCD
peace
|
|
dvdjammer
Newbie
|
8. November 2005 @ 15:18 |
Link to this message
|
|
Thanks Bigfatboy for info. Currently doing things you suggested, let you know progress when completed.
|
Senior Member
|
8. November 2005 @ 15:24 |
Link to this message
|
Quote:
5:39:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
It's not recognizing your media, update your firmware like fatboy said.
And you shouldn't be multitasking when you burn, it messed up your buffers so you end up w/ wierd results.
|
|
dvdjammer
Newbie
|
10. November 2005 @ 13:30 |
Link to this message
|
|
I uninstalled nero, used cleanup tool and did not install incd program. Upgraded flash drive to 1.0c. Problems still occurring.
My DMA is still off. What do I need to do?
1a23000671301216b6327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0C nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1881MB (1927108kB)
Memory in use : 18
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
UDF/ISO compilation
6:17:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:17:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
6:17:40 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:17:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:17:41 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:17:41 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
6:17:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:17:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:17:41 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:17:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
6:17:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:17:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
6:17:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:17:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
6:17:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
6:17:41 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:17:41 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
6:17:41 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:17:41 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:17:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:17:41 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A80600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:17:41 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
6:17:49 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03360000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:17:55 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
6:17:55 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure
6:17:55 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:17:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:19:46 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:19:46 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:19:46 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
occurring.
This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 14:39
|
Senior Member
|
10. November 2005 @ 14:52 |
Link to this message
|
Here is how you fix the DMA settings.
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of "IDE ATA/ATAPI Controllers"
(B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel")
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
Quote:
6:17:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB
You are writing too close to the edge, this is how you fix that prob:
In Shrink go to Edit>Preferences>under the first tab scroll down in box until you get custom> in the box beside it type in 4300.
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
Is your burner external if not then you have a real problem. It could mean that you don't have your burner installed correctly. I shouldn't say 'real' as in big, but you will have to open it up. Assuming it's external.
|
|
dvdjammer
Newbie
|
10. November 2005 @ 15:34 |
Link to this message
|
|
Thanks GlueEater for helping. I went to uninstall from ide ata/atapi controllers, only item listed was Nvidia nforce(TM)ide controllers, once i clicked on the +. I did set shrink to 4300. Also tried a burning process to no avail.terry
1a23000671301216b6327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0C nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1881MB (1927108kB)
Memory in use : 18
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
UDF/ISO compilation
6:17:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
6:17:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
6:17:40 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:17:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
6:17:41 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
6:17:41 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
6:17:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:17:41 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:17:41 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:17:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
6:17:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:17:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
6:17:41 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:17:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
6:17:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
6:17:41 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:17:41 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
6:17:41 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:17:41 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
6:17:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:17:41 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A80600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:17:41 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
6:17:49 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03360000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
6:17:55 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
6:17:55 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure
6:17:55 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:17:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:19:46 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:19:46 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:19:46 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
terry
1a23000671301216b6327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/8/2005 8:13:26 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0C nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom1
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1825MB (1869728kB)
Memory in use : 20
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
CD-ROM (MP3)
7:16:17 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:16:17 PM #2 Text 0 File Burncd.cpp, Line 2948
_NEC DVD_RW ND-1300A
Buffer underrun protection activated
7:16:17 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
7:16:17 PM #4 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
7:16:17 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:16:17 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
7:16:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 75899 ( 16:53.74)
7:16:17 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:16:17 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
7:16:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:16:17 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 75900 (75900) = #75900/16:52.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 75898 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
7:16:17 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 155750400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
75900 | lead-out | 1 | 0x41 | 0x00
7:16:17 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 75900 -> 75898.
7:16:17 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:16:17 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
7:16:17 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:16:17 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2,400 KB/s)
7:16:17 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03905A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
7:16:17 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:16:17 PM #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
7:17:26 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:17:30 PM #22 Text 0 File Mmc.cpp, Line 16352
<_NEC DVD_RW ND-1300A > start Close Session
7:17:47 PM #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 16x (2,400 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
terry
1a23000671301216b6327672
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/8/2005 8:13:26 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.16
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE DVD-ROM 16X >Version: 7.50 - HA 1 TA 1 - 6.6.0.16
Adapter driver: <> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
CdRomPeripheral : IDE DVD-ROM 16X 7.50 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A 1.0C nvidesm Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom3
IDE DVD-ROM 16X D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1880MB (1925752kB)
Memory in use : 18
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
UDF/ISO compilation
8:14:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:14:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:14:48 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:14:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:14:48 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:14:48 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running
8:14:48 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:14:48 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:14:48 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:14:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
8:14:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:14:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R
8:14:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:14:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------
8:14:48 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
8:14:48 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:14:49 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
8:14:49 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:14:49 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:14:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:14:49 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04A50600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
8:14:49 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
8:14:56 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042A0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:15:03 PM #24 SCSI -1024 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
8:15:03 PM #25 CDR -1024 File Writer.cpp, Line 311
Communication failure
8:15:03 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:15:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:16:53 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
8:16:53 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
8:16:53 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 1:46:22 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 10. November 2005 @ 15:36
|
|
Advertisement
|
|
|
|
dvdjammer
Newbie
|
24. November 2005 @ 03:12 |
Link to this message
|
|
Thanks members. up and running again.
|
|
