|
|
|
Is it my DVD? Cannot burn DVDs...
|
|
|
Dadagori
Newbie
|
3. November 2005 @ 16:16 |
Link to this message
|
|
Hello!!
Cutting to the chase, I've got a Sony Vaio VGN-S90PS (notebook), which comes with the MatSHITa UJ-812 CDRW/DVD-RW.
It was working good but since some days I cannot burn DVDs, I can still read them and burn CDs but the DVD burning function finishes with an error eeeeevery time. I'm copying the last log but if you want a previous one I can post it later too. I've tried with different DVD blank media (different brands), and none of them work fine. I have Nero 7 and also the latest firmware for my DVD (I think). So, I cannot see where the problem is. Please, any kind of help will be really welcome.
Thank you for everything in advance!!!
Regards,
Ricardo.
====================================
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 9:20:56
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/02 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MATSHITA UJ-812> Version: K103 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJ-812 >Version: K103 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : MATSHITA UJ-812 atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA UJ-812 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 132MB (136132kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.11.2005
ISO compilation
2:57:53 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:57:53 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
2:57:53 #3 Text 0 File Reader.cpp, Line 124
Reader running
2:57:53 #4 Text 0 File Writer.cpp, Line 113
Writer E: MATSHITA UJ-812 running
2:57:53 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
2:57:53 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
2:57:54 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1963359 (436:18.09, 3834MB)
2:57:54 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
2:57:54 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MATSHITA UJ-812, Media type: DVD-R
2:57:54 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:57:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1963360 (1963360) = #1963360/436:18.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963360 blocks [E: MATSHITA UJ-812]
--------------------------------------------------------------
2:57:54 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: MATSHITA UJ-812] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4020961280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1963360 | lead-out | 1 | 0x41 | 0x00
2:57:54 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:57:54 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
2:57:54 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
2:57:54 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
2:57:54 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2x (2,770 KB/s)
2:57:54 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:57:54 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
2:57:54 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON
2:57:54 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
2:57:54 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:13:34 #23 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 BD C0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0c5f0000: Len x10000
0xAC 83 BE DF 25 18 5A C7 56 51 9E 95 69 96 22 8D
0xA2 25 AC 81 FD E9 75 ED 6D 04 5C 7A 3A 16 07 86
0x0A 49 C2 9F 99 8A 94 66 72 A7 DA 9D 84 0A 6D 6A
3:13:45 #24 SPTI -1114 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 BD C0 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x07b51e00: Len x10000
0xAC 83 BE DF 25 18 5A C7 56 51 9E 95 69 96 22 8D
0xA2 25 AC 81 FD E9 75 ED 6D 04 5C 7A 3A 16 07 86
0x0A 49 C2 9F 99 8A 94 66 72 A7 DA 9D 84 0A 6D 6A
3:13:45 #25 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: MATSHITA UJ-812
3:13:45 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:13:46 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:13:46 #28 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 572863
3:13:46 #29 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 8:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005/03/12 7:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
Bigfatboy
Member
|
3. November 2005 @ 18:06 |
Link to this message
|
DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : MATSHITA UJ-812 atapi Port 1 ID 0 DMA: Off
DMA should be on for everything
DMA guide here - http://home.comcast.net/~bbmayo/FAQ.htm
peace
|
|
Dadagori
Newbie
|
4. November 2005 @ 12:43 |
Link to this message
|
Hi again!
Thanks for the help. I changed it....but it didn't work, it is still failing...I'm going nuts, it was working ok and it started to fail so suddenly, you have any other ideas? I'm posting my last log...
Thank you in advance!
Luis.
PS: Is the serial number important?
===================
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 9:20:56
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/02 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <MATSHITA UJ-812> Version: K103 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJ-812 >Version: K103 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJ-812 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJ-812 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 148MB (152248kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2005
ISO compilation
4:15:16 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:15:16 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
4:15:16 #3 Text 0 File Reader.cpp, Line 124
Reader running
4:15:16 #4 Text 0 File Writer.cpp, Line 113
Writer E: MATSHITA UJ-812 running
4:15:16 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
4:15:16 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
4:15:16 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1963359 (436:18.09, 3834MB)
4:15:16 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
4:15:16 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MATSHITA UJ-812, Media type: DVD-R
4:15:16 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:15:16 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1963360 (1963360) = #1963360/436:18.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963360 blocks [E: MATSHITA UJ-812]
--------------------------------------------------------------
4:15:16 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: MATSHITA UJ-812] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4020961280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1963360 | lead-out | 1 | 0x41 | 0x00
4:15:16 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:15:16 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
4:15:16 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
4:15:16 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
4:15:16 #17 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 2x (2,770 KB/s)
4:15:16 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:15:16 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
4:15:16 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON
4:15:16 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
4:15:16 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:39:38 #23 Text 0 File WriterStatus.cpp, Line 116
<E: MATSHITA UJ-812> start writing Lead-Out at LBA 1963360 (1DF560h), length 0 blocks
4:39:39 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:39:39 #25 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1963359
4:39:46 #26 Phase 33 File dlgbrnst.cpp, Line 1724
Simulation completed successfully at 2x (2,770 KB/s)
4:39:47 #27 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2x (2,770 KB/s)
4:39:47 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:39:47 #29 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
4:39:47 #30 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON
4:39:47 #31 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
4:39:47 #32 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:05:12 #33 Text 0 File WriterStatus.cpp, Line 116
<E: MATSHITA UJ-812> start writing Lead-Out at LBA 1963360 (1DF560h), length 0 blocks
5:05:12 #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:05:12 #35 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1963359
5:07:23 #36 SPTI -1 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 08 00 00 00 3E 02
Buffer x03a7a800: Len x20
5:07:23 #37 CDR -1 File ThreadedTransferInterface.cpp, Line 1921
Unspecified Recorder Error
E: MATSHITA UJ-812
5:07:23 #38 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1921
Could not perform end of Disc-at-once
5:07:23 #39 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
5:07:23 #40 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
E: MATSHITA UJ-812
5:07:23 #41 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
5:07:23 #42 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 8:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2005/03/12 7:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
5. November 2005 @ 01:41 |
Link to this message
|
Has it been working good with Nero7 ?
Recorder doesn't recognize disks properly.
Which brand is being used and is it on the list recommended by the drive maker.
4:15:16 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: MATSHITA UJ-812, Media type: DVD-R
|
Moderator
|
5. November 2005 @ 05:49 |
Link to this message
|
i think your burner's firmware is up to date according to this - http://forum.rpc1.org/dl_firmware.php?download_id=1780 however as attar pointed out, your firmware is not recognising the media you're using. just so we know what media you've got there, download dvd identifier (free) - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id... and use it to 'identify' one of those discs you're trying to burn with. it won't help you to use the discs but it will help us see what you're using and we can maybe suggest media that will work. i'm guessing you're using media that's newer than when your firmware was last updated (which was October 2004 according to that link above). This happens with burners, they get superceded when newer models come along and the older ones can no longer keep up with newer media.
as attar pointed out, this is what your burner's saying about the blank media you're using there - Quote:
Recorder: MATSHITA UJ-812, Media type: DVD-R
This 3line paragraph is an example of what you'd see if the firmware could recgnise the media properly - Quote:
Recorder: SONY DVD RW DW-U50A, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 5. November 2005 @ 05:51
|
|
Dadagori
Newbie
|
5. November 2005 @ 06:07 |
Link to this message
|
Thanks guys,
I downloaded the program and tried to recognize my media but it says
[01:04:14] ERROR : Unsupported Medium Detected
[01:04:14] INFO : Disc Identification Requires DVD or Blu-Ray Recorder And Matching Media
I dont have any more blank DVDs, do I need them blank for the Identification? I bought my DVDs in a 100-en store here in Japan. I've been buying them for more than half a year and the problem is just happening some two weeks ago. I had Nero 6.6 and I thought that maybe I had to upgrade it, I did that but still is not working ok.
I'll keep trying anything you think might help. If I need to buy a blank one, I'll do that tomorrow because now everything is already closed (1.00am).
Thanks for everything,
Regards,
Ricardo.
|
Moderator
|
5. November 2005 @ 06:17 |
Link to this message
|
|
just use one you've already burnt and 'identify' that.
as to buying more media, don't (potentially) waste more more money on discs 'til we've figured out what discs you can use.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Dadagori
Newbie
|
5. November 2005 @ 06:28 |
Link to this message
|
|
ok, but as I told before, it's not identifying it...
It gives me that error message. why could be that?
Thanks!!
RIcardo.
|
Moderator
|
5. November 2005 @ 06:43 |
Link to this message
|
ok, try another couple programs - dvdinfopro (free monthly trial) from www.dvdinfopro.com - make sure you pick the version with adverts
try vso inspector too - you can get it here - http://www.vso-software.fr
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
5. November 2005 @ 07:25 |
Link to this message
|
@ Dadagori hi :)
Quote:
ERROR:Unsupported Media Detected
INFO: Disc Identification Requires DVD or Bluray....
when you activate DVDIdentifier .where it says in blue writeing
Disc Identifier it starts on
DVD+R/+RW as default.... make sure you click on the next one along
DVD-R/-RW before clicking identify
other wise it will show the error above
 gif by ireland
we cant help if you wont help yourself |
|
Dadagori
Newbie
|
5. November 2005 @ 07:27 |
Link to this message
|
|
it's me again...
I tried with the three of them, with the same DVD and none of them recognized it...then I changed to another DVD of the same brand that I burnt previously and still was not recognized. The same message Error or N/A....
As I said, I was using those DVDs before and they were working OK, I don't know why all of a sudden they started failing. Any other info you might need?
Thanks for your time,
regards,
Ricardo.
UPDATE: I'm using the DVD-R/RW tab in the DVD Identifier...
This message has been edited since posting. Last time this message was edited on 5. November 2005 @ 07:29
|
Moderator
|
5. November 2005 @ 08:00 |
Link to this message
|
|
cheers gurnard, you got me on the run now :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Dadagori
Newbie
|
5. November 2005 @ 08:06 |
Link to this message
|
Hey guys,
I was trying to recognize some other DVDs and realized that none of them is being recognized by any of those programs...I've tried Victor, taiyo and even sony (the same brand of my laptop)...
Checking the DVD InfoPro log, I noticed that:
Media Information
Region information N/A not a DVD-VIDEO
Drive doesn't support media code
Format Capacity 3.87GB(4.16GB)
Book Type DVD-R
Media Type DVD-R
Manufacturer Rated Speed Unknown
Available Write Descriptor CLV 2.0x 2770KBps
Available Write Descriptor CLV 1.0x 1385KBps
Write Strategy Speed Not Defined
Data area starting sector 30000h
Data area end sector 1EF53Fh
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
Complete Media Code
I don't know what's going on here, my firmware is in japanese...would that be a problem? if so, why it was working for more than one year without any problem and suddenly started failing? I've used Nero all the time and it did always a good job...
Thanks again for you help guys,
I really appreciate it,
Regards,
Ricardo.
PS: I'm afraid I'm going to sleep now...so I won't reply in some hours...thanks!
|
Moderator
|
5. November 2005 @ 08:15 |
Link to this message
|
|
no worries, we'll still be here annoying some other poster or other :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Dadagori
Newbie
|
5. November 2005 @ 08:20 |
Link to this message
|
|
hey, but I still want answers :P I'll read them in the morning :D
See you! Have a good day!
Ricardo.
|
Senior Member
|
5. November 2005 @ 08:20 |
Link to this message
|
|
goodnight :)
gif by ireland
we cant help if you wont help yourself |
|
MovieDud
Suspended due to non-functional email address
|
5. November 2005 @ 08:21 |
Link to this message
|
@creaky, friend I'm no expert, but could dadagori have the Iso clicked, as you had and found that out when using Nero 7, and after unclicking it it began to work. I just noticed all the true statements in relation to the Iso section. I'm just asking you my friend as you know Neor logs. Have a good day.
MovieDud
|
Moderator
|
5. November 2005 @ 08:26 |
Link to this message
|
@Moviedud - hiya, you know what, i'd overlooked that it's Nero 7 for one, for two you may be on to something there..i'm no ISO expert myself, just checked one of my logs, mine show 'ISO/UDF compilation' as i pick dvd-video compilation for all my burns....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
AfterDawn Addict
|
5. November 2005 @ 11:26 |
Link to this message
|
|
@creaky
the drive should still recognize the media and DVDinfo should still recognize the disk type notwithstanding the type of burn?
Does this burner still play disks?
|
Moderator
|
5. November 2005 @ 11:29 |
Link to this message
|
|
yup, dvd identifier should've sorted it ;wierd
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Dadagori
Newbie
|
5. November 2005 @ 14:44 |
Link to this message
|
|
hi, I'm half-awake... :D
yes, it's playing cds and dvds normally...no problem at all about that...
regards.
|
|
MovieDud
Suspended due to non-functional email address
|
5. November 2005 @ 16:12 |
Link to this message
|
|
@attar, you are right my friend, DvdIdentifier should still pick up the media and provide the info....This is kind of strange, yet dadagori just shared that it plays Dvd's... I wonder if Dvd Identifier would pick up that movie disk since it can be played? If it picks up the actual movie disk and not the blank media...wouldn't that be a firmware issue as the burner doesn't pick up the kind of media being used?
MovieDud
|
AfterDawn Addict
|
6. November 2005 @ 01:29 |
Link to this message
|
|
Don't suppose that the last successful log is still around?
Has Nero7 been the only version on the machine or was an earlier version erased?
|
|
Dadagori
Newbie
|
6. November 2005 @ 01:44 |
Link to this message
|
Hello,
I don't have the last succesful log around...and as I said before, I had Nero 6.6 before and it was failing a lot, that's why I changed to Nero 7, and the same errors still appear. It's as if nothing changed even though I upgraded. Only once it burnt ok (some many days ago), but I didn't keep the log.
Any ideas?? I really don't understand myself what would be wrong, would you say it might be a hardware problem?
Thanks for your help,
Regards,
Ricardo.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
6. November 2005 @ 04:50 |
Link to this message
|
|
Why would the hardware be happy to burn a cd and stumble on a dvd?
Would a log from a cd burn say anything useful?
Does the firmware come into play for both operations?
Would reflashing the firmware make things worse?
sorry, just questions, no answers.
This message has been edited since posting. Last time this message was edited on 6. November 2005 @ 04:51
|
|
