|
|
|
Nero could not perform end of disk-at-once
|
|
|
babagan
Newbie
|
4. November 2005 @ 09:07 |
Link to this message
|
|
My computer stopped recording dvd-video. I try burning DVD-video with the video_TS folder procedure and it fails at the end of the burn. Tried formating the C drive, tried different versions of Nero, tried different media incl Verbatim nothing helps. I am going nuts. It burns CDs and the occasional data DVD ok but it just wouldnt back up dvd-video. PLS HELP here is the log:
5C
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DW-U50A> Version: 1.5f - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5f - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-U50A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (521712kB)
Free physical memory: 273MB (279972kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.11.2005
UDF/ISO compilation
19:09:45 #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
19:09:45 #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
19:09:45 #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:09:45 #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
19:09:46 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
19:09:46 #6 Text 0 File Reader.cpp, Line 124
Reader running
19:09:46 #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DW-U50A running
19:09:46 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
19:09:46 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
19:09:46 #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
19:09:46 #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
19:09:46 #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
19:09:46 #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-U50A, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
19:09:46 #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:09:46 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: SONY DVD RW DW-U50A]
--------------------------------------------------------------
19:09:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DW-U50A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
19:09:46 #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
19:09:46 #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
19:09:46 #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
19:09:46 #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
19:09:46 #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 1x (1,385 KB/s)
19:09:47 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:09:47 #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
19:09:47 #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
19:09:47 #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
19:09:47 #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:09:52 #27 Text 0 File Cdrdrv.cpp, Line 1197
19:09:52.734 - E: SONY DVD RW DW-U50A : Queue again later
19:11:22 #28 Text 0 File Cdrdrv.cpp, Line 1197
19:11:22.078 - E: SONY DVD RW DW-U50A : Queue again later
20:07:34 #29 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DW-U50A> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks
20:07:34 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:07:35 #31 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2286111
20:09:44 #32 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 30
20:09:44 #33 CDR -1046 File ThreadedTransferInterface.cpp, Line 1937
Illegal disc
E: SONY DVD RW DW-U50A
20:09:44 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
20:09:44 #35 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
20:09:44 #36 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
E: SONY DVD RW DW-U50A
20:09:44 #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
20:09:44 #38 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 4. November 2005 @ 12:17
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
4. November 2005 @ 12:02 |
Link to this message
|
Quote:
5C8XXXXXXXXXXXXXXXXXXXXXXXXX
You need to edit out your Nero serial number. To edit: click on the "pencil & paper" icon on the right inside the faded orange like bar, then edit your Nero serial out. Once you're done click "save changes".
Quote:
Recorder: <SONY DVD RW DW-U50A> Version: 1.5f
Your burner's firmware is out of dated, go here http://forum.rpc1.org/dl_firmware.php?download_id=1624 and download the latest 1.5g to run the updates on your burner.
Quote:
CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: Off
Your Sony burner's DMA is Off, you need to "uninstall" its driver, so it can turns back DMA on.
((To enable DMA back ON by "uninstalling" it's driver ?for Win XP users?))
A) on "DESKTOP" right click on "MY COMPUTER", left click on "PROPERTIES"
B) left click on "HARDWARE", left click on "DEVICE MANAGER"
C) left click on + sign of DVD/CD-ROM Drives
D) double left click on your DVD burner or your dvd-rom drive
E) left click on "DRIVER", left click on "UNINSTALL", you will see a "Warning: you are about to uninstall this device from your system", just click "OK", now "SHUTDOWN" or "restart" your computer
F) once you restart your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "uninstall" it from the ?IDE ATA/ATAPI Controllers?
(A) left click on + sign of "IDE ATA/ATAPI Controllers"
(B) double left click on either Secondary or Primary IDE Channel (burner's driver are usually "Secondary Channel")
(C) click on "DRIVER", "UNINSTALL", "OK" and then "shutdown" or "restart" your computer. That's it... easy as smoking!!!
***NOTE: you have to know where your "DVD Burner" or "DVD-ROM drive" is installed to what Channel). Usually it's the "Secondary IDE Channel" because your "C: drive or Hard Drive" would be the main aka Primary IDE Channel already. If you're not sure, then you need to check it with "Nero Toolkit" first before you "uninstall" any of them. Once you verify with Nero Toolkit, then you can continue with the above steps.
NOTE: To verify your dvd burner/dvd-rom drivers with Nero:
Open up "StartSmart", click on "Nero Toolkit", then click on "Nero InfoTool" (InfoTool will run and retrieve all drivers), now click on "Configuration" - this should show you where your DVD Burner/DVD-ROM is installed under either Primary or Secondary <--- make good note of that and you're ready to "uninstall" your dvd burner/dvd-rom drivers now.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
This is too close to the edges, try to custom to 4360MB or at least 4400MB with high quality media.
Quote:
Media type: DVD-R
Disc Manufacturer: Prodis - cF01
This is not a very good brand, try TY, Verbatim or Maxell (Made In Japan)
Quote:
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00
Your burner doesn't like the media.
Quote:
Burn process failed at 1x (1,385 KB/s)
Try to burn at least 2X or 4X (at the max) with high quality media like Taiyo Yuden, Verbatim or Maxell (Made In Japan)
This message has been edited since posting. Last time this message was edited on 4. November 2005 @ 12:03
|
|
babagan
Newbie
|
4. November 2005 @ 13:05 |
Link to this message
|
thanks for the comprehensive answer. two things Nero info tool says I dont have system aspi. Do I need that? Second, where do I custom set to 4360mb from?
|
AfterDawn Addict
|
4. November 2005 @ 17:07 |
Link to this message
|
|
If you used Shrink to rip with then go to Edit -> Preferences and set the target size to Custom then 4360 MB for the media you are currently using.
I don't know if you are using Shrink. You could always use Shrink to set the file size though.
Looks like you have WinASPI:
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
That's all I've ever had. No problems.
You know that DVD may play...It is missing part of the lead-out and it may act odd when the movie ends. I've made one or two of those. Try it.
|
|
babagan
Newbie
|
4. November 2005 @ 23:34 |
Link to this message
|
|
Did all of the above and the same error comes up when Nero is closing the disk. I get it with quality media as well. Could it be the burner? here is the new log
5C800xxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DW-U50A> Version: 1.5g - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5g - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-40 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U50A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-U50A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (521712kB)
Free physical memory: 190MB (194996kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2005
UDF/ISO compilation
10:30:53 #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
10:30:54 #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
10:30:54 #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:30:54 #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
10:30:54 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
10:30:54 #6 Text 0 File Reader.cpp, Line 124
Reader running
10:30:54 #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DW-U50A running
10:30:54 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:30:54 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:30:54 #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
10:30:55 #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2232863 (496:11.38, 4361MB)
10:30:55 #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
10:30:55 #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-U50A, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
10:30:55 #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:30:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [E: SONY DVD RW DW-U50A]
--------------------------------------------------------------
10:30:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DW-U50A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4572905472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2232864 | lead-out | 1 | 0x41 | 0x00
10:30:55 #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:30:55 #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
10:30:55 #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
10:30:55 #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
10:30:55 #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 1x (1,385 KB/s)
10:30:55 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:30:55 #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
10:30:55 #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON
10:30:55 #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
10:30:55 #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:31:02 #27 Text 0 File Cdrdrv.cpp, Line 1197
10:31:02.203 - E: SONY DVD RW DW-U50A : Queue again later
10:32:38 #28 Text 0 File Cdrdrv.cpp, Line 1197
10:32:38.250 - E: SONY DVD RW DW-U50A : Queue again later
10:32:39 #29 Text 0 File Cdrdrv.cpp, Line 1197
10:32:39.000 - E: SONY DVD RW DW-U50A : Queue again later
10:32:39 #30 Text 0 File Cdrdrv.cpp, Line 1197
10:32:39.031 - E: SONY DVD RW DW-U50A : Queue again later
10:46:14 #31 Text 0 File Cdrdrv.cpp, Line 1197
10:46:14.984 - E: SONY DVD RW DW-U50A : Queue again later
11:04:54 #32 Text 0 File Cdrdrv.cpp, Line 1197
11:04:54.593 - E: SONY DVD RW DW-U50A : Queue again later
11:27:33 #33 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DW-U50A> start writing Lead-Out at LBA 2232864 (221220h), length 0 blocks
11:27:33 #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:27:33 #35 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2232863
11:30:34 #36 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 30
11:30:34 #37 CDR -1046 File ThreadedTransferInterface.cpp, Line 1937
Illegal disc
E: SONY DVD RW DW-U50A
11:30:34 #38 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
11:30:34 #39 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
11:30:34 #40 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
E: SONY DVD RW DW-U50A
11:30:34 #41 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:30:34 #42 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 4. November 2005 @ 23:34
|
Moderator
|
5. November 2005 @ 01:44 |
Link to this message
|
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-U50A >Version: 1.5g - HA 1 TA 0
- due to the burner being internal to the PC (i can tell that from HA 1 TA 0 - that means the burner is Master on the Secondary IDE channel) and that question mark there, there's something still not right wih your DM settings. try to get them sorted again
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
babagan
Newbie
|
5. November 2005 @ 02:22 |
Link to this message
|
|
nero info tool confirms that the burner is the master of the secondary IDE and that both DMA and Autorun are on. What more can I do?
|
|
Advertisement
|
|
|
Moderator
|
5. November 2005 @ 03:51 |
Link to this message
|
i think you just gotta persevere with the DMA settings as i can't see any reason why it's not working (yet). not disputing alkohol's DMA suggestion, i just find it easier to provide this one - http://home.comcast.net/~bbmayo/FAQ.htm
if that doesn't work try this way (should be the same difference, just be very careful using regedit) - Quote:
Run REGEDIT. Go to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}
It has subkeys like 0000, 0001, 0002, etc. Normally 0001 is the primary IDE channel, 0002 the secondary, but other numbers can occur under certain circumstances. You have to go through these subkeys and check the DriverDesc value until you find the proper IDE channel.
Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. Reboot. The drive DMA capabilities will be redetected.
Open Device Manager again and check whether the device is now actually using DMA mode. If so, congratulations, you've made it (at least until the next time Windows disables DMA).
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
