|
|
|
Bad Yudens or Something else? [updated: Bad Yudens]
|
|
|
yeardley
Junior Member
|
6. November 2005 @ 14:11 |
Link to this message
|
Hi, been under this config. for about a year - no problems.
The DVD data is on an external HDD, and I burn with an external drive. USB 2.0 connects it all.
Within the past week I've started to get failed data verification in Nero. Even though they're Taiyo Yudens, I think the problem might be these new discs I'm using. 8x Silver Thermal Taiyo-Yuden DVD-R. The only thing I can think of is that the discs are bad or my burner is dying.
I know there is a low amt. of physical memory available in the Nero log and I'm going to look into that and post back. But can anyone spot something I'm missing from the Nero log or the drive test or media quality test below? Thanks.
Nero Log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.8
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 2 TA 0 - 6.6.0.8
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA760 DVD/CDRW>Version: 1.50 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA760 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA760 DVD/CDR D: CDRom0
Memorex DVD+/-DLRWL1 F16 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458220kB)
Free physical memory: 64MB (65644kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2005
UDF/ISO compilation
5:18:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:18:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:18:42 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:18:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:18:43 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:18:43 PM #6 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-DLRWL1 F16 running
5:18:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:18:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
5:18:43 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
5:18:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
5:18:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
5:18:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
5:18:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:18:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
5:18:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
5:18:44 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:18:44 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
5:18:44 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:18:44 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:18:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:44 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
5:18:44 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
5:18:44 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
5:18:44 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:18:44 PM #25 Text 0 File DVDR.cpp, Line 5317
Drive: Memorex DVD+/-DLRWL1 F16
Book Type request [LO]: DVD-ROM
Book Type setting not supported for the loaded disc type
5:19:10 PM #26 Text 0 File Cdrdrv.cpp, Line 1287
17:19:10.828 - Memorex DVD+/-DLRWL1 F16\H2 T0 : Queue again later
5:32:54 PM #27 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 2202144 (219A20h), lenght 0 blocks
5:32:54 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:32:54 PM #29 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2202143
5:33:20 PM #30 Text 0 File DVDR.cpp, Line 5317
Drive: Memorex DVD+/-DLRWL1 F16
Book Type request [LO]: DVD+R
Book Type setting not supported for the loaded disc type
5:33:20 PM #31 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
5:33:20 PM #32 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
5:46:21 PM #33 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1D 0x4A 0xE7 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:46:25 PM #34 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1D 0x4A 0xE8 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:46:28 PM #35 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1D 0x4A 0xE9 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:46:32 PM #36 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1D 0x4A 0xEA 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:47:10 PM #37 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1E 0x66 0x1D 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:47:10 PM #38 SectorVerify 20 File Cdrdrv.cpp, Line 9415
Read errors from sector 1919719 to 1919722
5:47:13 PM #39 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1E 0x66 0x1E 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:47:17 PM #40 SCSI -1128 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04981C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x1E 0x66 0x1F 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
5:48:21 PM #41 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:48:22 PM #42 SectorVerify 20 File Cdrdrv.cpp, Line 9415
Read errors from sector 1992221 to 1992223
5:48:22 PM #43 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 1:37:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 1/3/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 1/3/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 1/3/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
_____________________________
CD-DVD Test Results:
Disc Quality Test Results:
This message has been edited since posting. Last time this message was edited on 6. November 2005 @ 22:28
|
|
Advertisement
|
|
|
|
Senior Member
|
6. November 2005 @ 14:25 |
Link to this message
|
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 1/3/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 1/3/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 1/3/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP)
You have Nero's INCD packet writing thing, you have to get rid of this. To do this you have to uninstall Nero completly using Nero's cleantool. After you've used it to uninstall reinstall but this time choose to not install INCD.
Also your Nero is a few versions behind. Current version is 6.6.0.16
That's all I got from it, might be missing something.
|
|
yeardley
Junior Member
|
6. November 2005 @ 14:45 |
Link to this message
|
|
Thanks for the quick response...
I can remove InCD if that is what's causing the problem, but if so, I don't understand why it hasn't caused any problems for me in the past year. That doesn't make any sense to me.
But, if so, what could I use for packet writing software instead?
Also, doesn't the disc look all messed up on the second image above? By the end of the scan it had a quality rating of 0, and I don't understand all the errors but there were a lot of them.
|
|
bspisak
Newbie
|
8. November 2005 @ 17:31 |
Link to this message
|
Where'd you buy your disks? I just bought a spool of 100 4x Silver Taiyo-Yuden DVD-R (DVD01X0240 from supermediastore.com) and I've just burnt 4 coasters in a row with KEY_MEDIUM_ERROR.
I'm using Nero 6.6.0.12 and the lastest FW (A110) for my Iomega Super DVD.
|
|
yeardley
Junior Member
|
8. November 2005 @ 18:55 |
Link to this message
|
Quote:
Where'd you buy your disks? I just bought a spool of 100 4x Silver Taiyo-Yuden DVD-R (DVD01X0240 from supermediastore.com) and I've just burnt 4 coasters in a row with KEY_MEDIUM_ERROR.
I'm using Nero 6.6.0.12 and the lastest FW (A110) for my Iomega Super DVD.
I'm glad you asked. I got them from supermediastore, same as you, and I also wasted my money on 100 of them. And I was planning to update this thread today because I have determined that it is the media. So, yes it looks like we got ripped off. Here's why.
I was pretty sure that this problem wasn't popping up because of my Nero version, the presence of InCD, or my drive's firmware, because, I wasn't doing anything new and fancy, I have used these discs before (TYG02's) with no complaint from my burner, which already has the latest firmware available. And I have had no real burning problems with my current set up for at least one year.
As far as I can tell these discs are NOT fakes. The coded media stamp reveals TYG02 and everything else it should (the G is for -r's, if it's a +r disc the code can be TY02 with no G). The inner ring hub code is GG000123. Authentic as they may be, I am quite sure that they are garbage.
But originally I was not expecting the media to be the problem. This is why you search for Taiyo Yuden's and why you care about buying genuine ones from a reputable seller, and why you are willing to spend more money to get them. (Even though I got mine at a pretty good price....however I would have paid more for no-name discs that weren't garbage)
So I hesitantly cleaned out my Nero, InCD and my registry with all the appropriate tools. I reinstalled Nero and brought it up to v. 6.6.0.16. I freed up extra memory by searching out processes that I could kill before the burn and I tried again. Same exact problem, same exact place. I'll post a Nero log of this below to prove for anyone interested that I changed these things and have all the other basics covered. (DMA on, burning @ 4x, etc.)
Finally I decided to test the media. I couldn't get my hands on a working copy of DvdInfoPro so I decided to learn more about Nero's CD-DVD speed. I went to the tool's own website at http://www.cdspeed2000.com and downloaded the latest version (free, with or without Nero) This version just came out earlier this month I believe (probably alongside new Nero 7 releases). I also learned about K-Probe and how to use it from here: http://club.cdfreaks.com/showthread.php?t=80545
(When doing these scans it's important to know that you will get a certain amount of errors with any disc, and realize what the acceptable range is and what the variance in the output graphs can tell you. Also you should do these scans on the slowest speed you can stand to wait for, preferably 1x or 2x)
Before I bought these TY's from supermediastore I had been using a lot of the Maxell RG03's from WalMart ("made in Japan"/white inkjet-printable tops, used to be able to get 'em in Gold mirror tops) dvd-r's. I conducted surface scans and File scans & CR2/PI/PO error scans on several of these (which have already seen some wear and tear by this point) and scanned several of the TY discs from the bundle to see how they matched up.
The comparison is revealing. I won't get too technical, but to make it short: The disc quality, surface scans, CR2 error scans, pi errors/failures, po failures, etc. of the Maxell's are excellent (even though they have been used a few times already) -- consistent and not very high, well below the minimum standards for a 'good quality disc.' No big surprise right? RG03's are pretty good.
The brand-new TYG02's usually caused the testing to abort before the scan even finished, and from what you could see on the incomplete graphs you would think someone rubbed them with sand before packing them up. These discs (the ones we got...not all TY's of course) are absolutely unnaceptable, and completely useless. I warn you that even if you get a good burn on the random one or two that you should back that data up on a different disc asap. I've gone back to burning successfully upon switching media.
I didn't immediately start pointing the finger at supermediastore.com...my first thought was "I must have a bad batch." But then I saw this old thread last night:
http://forums.afterdawn.com/thread_view.cfm/3/221360
Now I believe that supermediastore.com has a pot-luck supply. Some good, some bad. I will wait until I'm in a gambling mood before I buy from them again. One of the only reasons I did buy from them is that they present themselves in a very reputable way when it comes to TY's, even going as far as to point out how to spot real ones (which conveniently, and maybe truthfully look just like the unbranded spindles of TY's they have for sale, which we bought) and they have a picture of some certificate that says they're the "sure thing" when it comes to TY media. On that point, if anyone wants to buy the 65 or so crappy TYG02 8x silver thermal wrapped dvd-r's that I still have which I bought from Supermediastore.com, I will gladly print something up real quick that says you should buy them from me if that makes you feel more comfortable.
P.S. - I'm going to contact the store for a solution. If they provide one I will be fair and post it here. But my experience tells me that if they were willing to sell this junk in the first place they weren't planning on providing a lot of post-sale customer service.
P.P.S. - If anyone insists that I provide screenshots of the disc scans that I was mentioning, I will do it but I am going to have to re-do the scans because I didn't save the ones that I did, and I don't feel like redoing the scans right this second. So give me a couple days afte your request if you make one.
Here's the nero log to show I 'fixed the problems' that I mentioned above before I realized the problem was the media.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA760 DVD/CDRW>Version: 1.50 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA760 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA760 DVD/CDRW D: CDRom0
Memorex DVD+/-DLRWL1 F16 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 447MB (458220kB)
Free physical memory: 75MB (77124kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.11.2005
UDF/ISO compilation
5:58:44 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:58:44 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:58:44 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:58:44 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:58:45 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:58:45 PM #6 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-DLRWL1 F16 running
5:58:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:58:45 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:58:45 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:58:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
5:58:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
5:58:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
5:58:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:58:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
5:58:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
5:58:46 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:58:46 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
5:58:46 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:58:46 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
5:58:46 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:58:46 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
5:58:46 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
5:58:46 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
5:58:46 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:59:11 PM #25 Text 0 File Cdrdrv.cpp, Line 1286
17:59:11.828 - Memorex DVD+/-DLRWL1 F16\H2 T0 : Queue again later
6:12:55 PM #26 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 2202144 (219A20h), lenght 0 blocks
6:12:55 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:12:55 PM #28 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2202143
6:13:21 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
6:13:22 PM #30 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
6:24:34 PM #31 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04ED1600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x19 0x94 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
6:24:57 PM #32 SCSI -1128 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04ED1600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 0x00 0x00 0x19 0xDE 0xB0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x11 0x05
6:24:57 PM #33 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 1676336 to 1676351
6:30:47 PM #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:30:47 PM #35 SectorVerify 20 File Cdrdrv.cpp, Line 9938
Read errors from sector 1695408 to 1695423
6:30:47 PM #36 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 12/20/2004 1:37:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 8. November 2005 @ 19:08
|
Moderator
|
8. November 2005 @ 22:23 |
Link to this message
|
Quote:
Physical memory : 447MB (458220kB)
Free physical memory: 75MB (77124kB)
Memory in use : 83 %
- you're gonna have to close down more programs prior to dvd work/burning to free up more memory
whilst there's always a bad batch of discs out there to be had (bear in mind i've only skim-read the thread so far, i think i did see you mention the physical state of the disks) i personally would also think about whether it's the burner. My burner started playing silly beggars recently, well it was still burning fine as it had done for 2000+ burns, but my top notch Verbatim TYG02's were skipping upon playback. I tracked down problem to the burner and replaced it and re-did the failed burns. No more skipping movies.
- just something to keep in mind to check out..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Blighter
Member
|
9. November 2005 @ 04:24 |
Link to this message
|
|
I'm backing Creaky up on this one - i had a similar problem and was tempted to blame the media until i replaced my burner. The old one was giving awful scans and i thought maybe i just got a bad batch of TY TYG02's so as a last resort i replaced my burner and ta-da! Perfect movies again! Woo!
|
|
bspisak
Newbie
|
9. November 2005 @ 07:23 |
Link to this message
|
I may have another theory on this. I noticed that on these bad burns, there was a notch in the outer most track rings where the burn had failed. Upon closer examination, I can actually see the defect in the media. The surface has been dimpled, like it was poked from the bottom of the disk in one spot.
It is hard to tell whether this is just the inner foil or the outer plastic surface as well. It looks like a manufacturing defect to me. There are no tell tale gouges or nicks, just a warp, like those gravity well graphs of space-time (to borrow a visual analogy. Like the first picture below without the "sun.")
In the photos, you can see the notch that was created by the laser scattering past the dimple.
I doesn't appear that every disc is like this, just the first half dozen or so off the top of the stack. What significance if any that has is not clear. They weren't damaged after packaging, as the outer protective plastic disc was undamaged and besides, any physical contact would have to come from underneath to match the direction of the dimple. (There was another thread where someone mentioned finding the first few discs off the top of his stack of TY's as also bad, but he assumed it was a static electricity thing. Related? Who knows?)
One other observation. While looking through a number of the other discs, there appear to be a few that have splatter marks on the surface. Almost like something was spilled on them, but it is a defect inside the disc, not out. Don't know if this affects the burn quality or not, but another indication that perhaps TY's manufacturing quality is taking a dive?
I will try another disc or so out of the stack and report back when I know more.
Brian
This message has been edited since posting. Last time this message was edited on 9. November 2005 @ 07:38
|
|
bspisak
Newbie
|
9. November 2005 @ 07:36 |
Link to this message
|
Here are the pix of the disc with the "splatter" marks on it.
Other discs in the pack had similar markings, but this one was by far the worse. Haven't tried to burn it yet.
|
Moderator
|
9. November 2005 @ 08:55 |
Link to this message
|
|
ugh, that don't look too good, definitely looks like you got a bum batch there..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
yeardley
Junior Member
|
9. November 2005 @ 09:46 |
Link to this message
|
Quote:
Quote:Physical memory : 447MB (458220kB)
Free physical memory: 75MB (77124kB)
Memory in use : 83 %
- you're gonna have to close down more programs prior to dvd work/burning to free up more memory
Thanks creaky, blighter and bspisak for the responses and the ideas.
@ creaky - I was waiting for someone to spot this. This is just one log from when I was still tweaking. I have since cleared up a load more memory. Still, if it really was an issue with having enough available memory, I would have expected to have this problem with non- Taiyo media as well.
@ bspisak - That's messed up. I'll take a look at my media also and post here if I have anything that looks similar. If these discs are passing through environments that cause this kind of abuse, I wonder if some discs can still be affected without visible deformations.
Also creaky, regarding the burner, it did cross my mind that my burner was crapping out. Actually, I was basically convinced of this after I had replaced and updated Nero, removed InCD, etc., and I was still having problems. It is always possible that another burner would handle these Yudens better.
That being said, these discs still fail a bunch of quality tests. Now, I think I know your feelings on this -- I was just viewing a thread in the 'media' forum about disc scans where you said something in one of the threads like 'I don't get the point of disc quality scans. To me, the disc is either good enough or it's not.'
I basically share this point of view but the fact remains that these discs aren't good enough. In my DVD player the difference is clearly visible with the naked eye. My dvd writer does have disc quality scanning support, and I'm not sure it's coincidental that they scan other discs, which I had no problem with, and show them as 'no problem discs', but while scanning these problematic TY's, they show them filled with PI/PO errors above and beyond the acceptable norms for a quality disc, etc. I also know that different burners can read the same disc differently, or the same disc when scanned twice can produce different results. This is why I've scanned MANY from each control group and scanned them at slow speeds. There is only one consistency - the bad discs produce horrible scanning results and the assumedly good discs from the past show no problems with good results.
Also don't forget that I am able to write to these discs just fine. It is the data verification that is always failing. Sure a better writer might be able to handle the discs by re-reading the damaged blocks/sectors over and over, and do a better job of that than my writer, but I'd rather have my writer let me know that the disc isn't quality (when I paid for, and was expecting a quality disc) so I know what to expect when I put it into DVD players or computers in the future.
SuperMediaStore.com update - they did issue me a return #. They state that they need to inspect the media for themselves once they get it before deciding what to do. We'll see. Who knows, maybe I have been too hard on them in my previous post. I shouldn't necessarily assume that they knew they were sending out sub-par media. On the other hand, as anyone can see from this thread, and as other threads have shown which I've cited above, I'm not the only one who has had this exact same problem with this manufactured disc from this supplier.
|
Moderator
|
9. November 2005 @ 09:52 |
Link to this message
|
|
@yeardley - re the memory - you're quite right about that affecting other media too. i always make every journey useful ie if i see a logfile i go right thru it, though i'm not always clear enough ie the stuff i mention doesn't necessarily always have a direct effect on the failure in question; with stuff like Nero we have to get all the basics sorted then we narrow down the cuplrit(s) hopefully, that's all...
i usually check each blank that i go to burn, i just glance for imperfections such as you've got on your discs. i got unlucky with a few Verbatims once, a few blotches in the same section of a few discs. luckily it's very rare i see imperfections, but it obviuosly happens, sometime we get stung by crap discs. it's very unnerving but it just shouldn't happen. if nothing else it gives the bad media advocates an excuse to say not all decent media is worth buying
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 9. November 2005 @ 09:56
|
|
Advertisement
|
|
|
|
bspisak
Newbie
|
12. November 2005 @ 09:56 |
Link to this message
|
|
Just to follow-up:
I've now burned ~15 discs in a row out of this batch. Even the splotchy one burned and verified fine. It appears that only the first 6 had the dimple defect causing my problems.
When I emailed supremediastore.com, I had a return email and RMA number 10 minutes later. I'm glad they stand behind their media.
Brian
|
|
