|
|
|
HELP nero error while burning
|
|
|
THECROW1
Suspended due to non-functional email address
|
9. November 2005 @ 08:43 |
Link to this message
|
|
I have just ripped house of 1000 corpses and was trying to burn it to dis and then it said error reading data i saved the log below could someone please help me i am burning at 4x and useing bulkpaq disks i am sure they are tdk not 100% tho
serial number removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4320B D: CDRom0
PIONEER DVD-RW DVR-109 E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 55574528 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 367MB (376304kB)
Free physical memory: 113MB (115724kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.11.2005
UDF/ISO compilation
18:26:11 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
18:26:11 #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
18:26:11 #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
18:26:11 #4 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.IFO has been modified
18:26:11 #5 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_01_0.BUP has been modified
18:26:11 #6 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.IFO has been modified
18:26:11 #7 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_02_0.BUP has been modified
18:26:11 #8 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.IFO has been modified
18:26:11 #9 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_03_0.BUP has been modified
18:26:11 #10 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.IFO has been modified
18:26:11 #11 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VTS_04_0.BUP has been modified
18:26:11 #12 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
18:26:11 #13 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:26:11 #14 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
18:26:11 #15 Text 0 File Reader.cpp, Line 127
Reader running
18:26:11 #16 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
18:26:11 #17 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:26:12 #18 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:26:12 #19 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
18:26:12 #20 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2094015 (465:20.15, 4089MB)
18:26:12 #21 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
18:26:12 #22 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
18:26:12 #23 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:26:12 #24 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2094016 (2094016) = #2094016/465:20.16
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2094016 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
18:26:12 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4288544768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2094016 | lead-out | 1 | 0x41 | 0x00
18:26:13 #26 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:26:13 #27 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
18:26:13 #28 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:26:13 #29 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
18:26:13 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:26:13 #31 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: IS01....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 49 53 30 31 00 - 00 00 00 30 30 31 00 38 ...IS01....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
18:26:13 #32 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
18:26:26 #33 Text 0 File Cdrdrv.cpp, Line 1286
18:26:26.409 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:39 #34 Text 0 File Cdrdrv.cpp, Line 1286
18:26:39.177 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:39 #35 Text 0 File Cdrdrv.cpp, Line 1286
18:26:39.608 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:39 #36 Text 0 File Cdrdrv.cpp, Line 1286
18:26:39.798 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:40 #37 Text 0 File Cdrdrv.cpp, Line 1286
18:26:40.269 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:40 #38 Text 0 File Cdrdrv.cpp, Line 1286
18:26:40.729 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:26:40 #39 Text 0 File Cdrdrv.cpp, Line 1286
18:26:40.920 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:27:53 #40 Text 0 File Cdrdrv.cpp, Line 1286
18:27:53.294 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:27:53 #41 Text 0 File Cdrdrv.cpp, Line 1286
18:27:53.754 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:27:53 #42 Text 0 File Cdrdrv.cpp, Line 1286
18:27:53.945 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:29:06 #43 Text 0 File Cdrdrv.cpp, Line 1286
18:29:06.329 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:29:06 #44 Text 0 File Cdrdrv.cpp, Line 1286
18:29:06.789 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:29:06 #45 Text 0 File Cdrdrv.cpp, Line 1286
18:29:06.980 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:30:19 #46 Text 0 File Cdrdrv.cpp, Line 1286
18:30:19.354 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:30:19 #47 Text 0 File Cdrdrv.cpp, Line 1286
18:30:19.814 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:30:20 #48 Text 0 File Cdrdrv.cpp, Line 1286
18:30:20.495 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:30:20 #49 Text 0 File Cdrdrv.cpp, Line 1286
18:30:20.966 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:30:21 #50 Text 0 File Cdrdrv.cpp, Line 1286
18:30:21.156 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
18:31:00 #51 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
18:31:00 #52 Text 0 File Reader.cpp, Line 385
Exception value: -1
18:31:00 #53 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:31:45 #54 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 22/10/2005 20:54:37 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 10:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 10:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 10:53:30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 11. December 2005 @ 06:48
|
|
Advertisement
|
|
|
|
|
THECROW1
Suspended due to non-functional email address
|
9. November 2005 @ 08:55 |
Link to this message
|
|
If my aspi driver was corrupt could that be the problem?
|
Moderator
|
9. November 2005 @ 22:09 |
Link to this message
|
hi..
ASPI being a corrupt could be a problem, however ASPI looks fine to me from the logfile. here's what i found....
Quote:
1a25**********************
- EDIT OUT your serial number
Quote:
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58
- burner's firmware is up to date
Quote:
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: Off
- DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
Physical memory : 367MB (376304kB)
Free physical memory: 113MB (115724kB)
Memory in use : 69 %
- try to close down more programs prior to dvd work/burning to free up more memory
Quote:
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
- hmmm these discs don't sound very brand name to me...did some more searching as my crap media sensor was ringing. found one - http://forums.afterdawn.com/thread_view.cfm/205764
Quote:
Error reading data
- see previous comment.
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 10:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 10:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 10:53:30 (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
THECROW1
Suspended due to non-functional email address
|
13. November 2005 @ 05:15 |
Link to this message
|
|
Mate i tryed every thing you sugested and i am still haveing the same problems is there anything else you can think of?I am just about to try useing Roxio 8 do know if it will make a dif tho what do you think??
|
Moderator
|
13. November 2005 @ 06:20 |
Link to this message
|
|
let's have latest section of log then to see if there's anything left to tweak....and i presume you're using some decent media now too...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
THECROW1
Suspended due to non-functional email address
|
14. November 2005 @ 09:29 |
Link to this message
|
It seems to be working now but 3 out of 5 disks fail and we all know that that aint good that is quite alot of wasted disks if you work it out i have also changed my media to ritek 05 the read buffer at the bottom of Nero it keeps jumping up and down from 1/10 10/93 etc dont know if that means something.
this is my last log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4320B D: CDRom0
PIONEER DVD-RW DVR-109 E: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 55574528 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 367MB (376304kB)
Free physical memory: 91MB (93776kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.11.2005
UDF/ISO compilation
20:10:09 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
20:10:09 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
20:10:09 #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
20:10:09 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
20:10:09 #5 Text 0 File Reader.cpp, Line 127
Reader running
20:10:09 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
20:10:09 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:10:10 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:10:10 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:10:10 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2094015 (465:20.15, 4089MB)
20:10:10 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
20:10:10 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
20:10:10 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:10:10 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2094016 (2094016) = #2094016/465:20.16
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2094016 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
20:10:10 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4288544768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2094016 | lead-out | 1 | 0x41 | 0x00
20:10:11 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:10:11 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
20:10:11 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:10:11 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
20:10:11 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:10:11 #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: IS01....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 49 53 30 31 00 - 00 00 00 30 30 31 00 38 ...IS01....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
20:10:12 #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
20:10:17 #23 Text 0 File Cdrdrv.cpp, Line 1286
20:10:17.100 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:27 #24 Text 0 File Cdrdrv.cpp, Line 1286
20:10:27.786 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:27 #25 Text 0 File Cdrdrv.cpp, Line 1286
20:10:27.976 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:28 #26 Text 0 File Cdrdrv.cpp, Line 1286
20:10:28.406 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:28 #27 Text 0 File Cdrdrv.cpp, Line 1286
20:10:28.587 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:29 #28 Text 0 File Cdrdrv.cpp, Line 1286
20:10:29.077 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:29 #29 Text 0 File Cdrdrv.cpp, Line 1286
20:10:29.508 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:29 #30 Text 0 File Cdrdrv.cpp, Line 1286
20:10:29.688 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:10:52 #31 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
20:10:52 #32 Text 0 File Reader.cpp, Line 385
Exception value: -1
20:10:52 #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:12:31 #34 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
20:12:31 #35 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
20:12:31 #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 22/10/2005 20:54:37 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 10:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 10:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 10:53:30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[url=http://imageshack.us][img=http://img1.imageshack.us/img1/9197/crowpcard8sy.jpg][/url]
|
Moderator
|
14. November 2005 @ 09:32 |
Link to this message
|
|
you're still having trouble as you haven't followed all the previous suggestions, ie free memory, crap quality media and removing InCD...
...you need to do those things and post back...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Senior Member
|
14. November 2005 @ 09:38 |
Link to this message
|
Also, i don't know if it will help, but Nero 6x is now up to 6.6.0.18 . Listen to creaky, he knows what he is doing, even in his sleep. :)
Die CMC Mag!!! |
Moderator
|
14. November 2005 @ 09:40 |
Link to this message
|
|
now that is scary as i rarely sleep enough :) :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
THECROW1
Suspended due to non-functional email address
|
14. November 2005 @ 10:27 |
Link to this message
|
I have been haveing probs with my computer as well but i did do everything you sugested i eaven went out and paid £20 for ritek disks because i know they are probably the best on the market at the moment.
Incd is no longer in the computer i downloaded the Nero clean tools from the Nero website as for the dma i followed the instructions from the site you recomended and restarted my comuter the pioneer 109 i am useing is an external via usb 2.0 do you think it makes a difference useing an internal rather than external? and i ended apps in my taskbar and eaven brought up task manager to end processes to free up memory
i will do another burn if it fails i will post that log as well.
[url=http://imageshack.us][img=http://img1.imageshack.us/img1/9197/crowpcard8sy.jpg][/url]
|
Moderator
|
14. November 2005 @ 10:28 |
Link to this message
|
|
i need the LAST section, ie the very latest burn entry - that's what i thought the previous reply contained....
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
THECROW1
Suspended due to non-functional email address
|
14. November 2005 @ 10:59 |
Link to this message
|
This is the latest log just made 2min ago
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2004 08:24:34
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.00 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4320B D: CDRom0
PIONEER DVD-RW DVR-109 E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 55574528 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 367MB (376304kB)
Free physical memory: 107MB (110428kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.11.2005
UDF/ISO compilation
20:50:09 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
20:50:10 #2 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.IFO has been modified
20:50:10 #3 Text 0 File DVDVideoCompilation.cpp, Line 552
Content of VIDEO_TS.BUP has been modified
20:50:10 #4 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed
20:50:10 #5 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:50:10 #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
20:50:10 #7 Text 0 File Reader.cpp, Line 127
Reader running
20:50:10 #8 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-109 running
20:50:10 #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:50:10 #10 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
20:50:10 #11 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
20:50:11 #12 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1777647 (395:01.72, 3471MB)
20:50:11 #13 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
20:50:11 #14 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
20:50:11 #15 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:50:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1777648 (1777648) = #1777648/395:1.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1777648 blocks [PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
20:50:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3640623104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1777648 | lead-out | 1 | 0x41 | 0x00
20:50:11 #18 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
20:50:11 #19 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
20:50:11 #20 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
20:50:11 #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
20:50:12 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:50:12 #23 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: IS01....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 49 53 30 31 00 - 00 00 00 30 30 31 00 38 ...IS01....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
20:50:12 #24 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
20:50:14 #25 Text 0 File Cdrdrv.cpp, Line 1286
20:50:14.249 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:25 #26 Text 0 File Cdrdrv.cpp, Line 1286
20:50:25.355 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:25 #27 Text 0 File Cdrdrv.cpp, Line 1286
20:50:25.786 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:25 #28 Text 0 File Cdrdrv.cpp, Line 1286
20:50:25.966 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:26 #29 Text 0 File Cdrdrv.cpp, Line 1286
20:50:26.447 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:26 #30 Text 0 File Cdrdrv.cpp, Line 1286
20:50:26.907 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:27 #31 Text 0 File Cdrdrv.cpp, Line 1286
20:50:27.088 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:27 #32 Text 0 File Cdrdrv.cpp, Line 1286
20:50:27.568 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:28 #33 Text 0 File Cdrdrv.cpp, Line 1286
20:50:28.009 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:50:28 #34 Text 0 File Cdrdrv.cpp, Line 1286
20:50:28.199 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:51:40 #35 Text 0 File Cdrdrv.cpp, Line 1286
20:51:40.573 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:51:41 #36 Text 0 File Cdrdrv.cpp, Line 1286
20:51:41.034 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:51:41 #37 Text 0 File Cdrdrv.cpp, Line 1286
20:51:41.224 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:53 #38 Text 0 File Cdrdrv.cpp, Line 1286
20:52:53.598 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:54 #39 Text 0 File Cdrdrv.cpp, Line 1286
20:52:54.059 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:54 #40 Text 0 File Cdrdrv.cpp, Line 1286
20:52:54.249 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:54 #41 Text 0 File Cdrdrv.cpp, Line 1286
20:52:54.720 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:55 #42 Text 0 File Cdrdrv.cpp, Line 1286
20:52:55.160 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:52:55 #43 Text 0 File Cdrdrv.cpp, Line 1286
20:52:55.341 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:54:07 #44 Text 0 File Cdrdrv.cpp, Line 1286
20:54:07.735 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:54:08 #45 Text 0 File Cdrdrv.cpp, Line 1286
20:54:08.195 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:54:08 #46 Text 0 File Cdrdrv.cpp, Line 1286
20:54:08.376 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:55:20 #47 Text 0 File Cdrdrv.cpp, Line 1286
20:55:20.770 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:55:21 #48 Text 0 File Cdrdrv.cpp, Line 1286
20:55:21.230 - PIONEER DVD-RW DVR-109\H2 T0 : Queue again later
20:55:40 #49 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
20:55:40 #50 Text 0 File Reader.cpp, Line 385
Exception value: -1
20:55:40 #51 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:56:25 #52 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2004 08:24:34
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 22/10/2005 20:54:37 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[url=http://imageshack.us][img=http://img1.imageshack.us/img1/9197/crowpcard8sy.jpg][/url]
|
Moderator
|
14. November 2005 @ 11:02 |
Link to this message
|
Quote:
Physical memory : 367MB (376304kB)
Free physical memory: 107MB (110428kB)
Memory in use : 70 %
- still need to keep an eye on that free memory. make sure to close down as much as you can while burning, and no multitasking during the burn either...(just in case you do)...
Quote:
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R
Disc Manufacturer ID: IS01, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
- that's bad media
Quote:
Error reading data
- see previous comment
ps you could try mounting the pioneer drive internally to try to rule out the enclosure it's in..(assuming it comes out of the enclosure - unless it's a proper external one). 2 of my burners are now in USB2 enclosures, no probs for me but there are are certain chipsets in enclosures that give burning trouble. However those media are classed as awful so it could still be the disks
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 14. November 2005 @ 11:05
|
|
THECROW1
Suspended due to non-functional email address
|
14. November 2005 @ 11:05 |
Link to this message
|
|
I usualy just sit back and leave it to burn i find it works a whole lot better as for the disks they are going back tomorrow
Thank you for all your help
[url=http://imageshack.us][img=http://img1.imageshack.us/img1/9197/crowpcard8sy.jpg][/url]
|
Moderator
|
14. November 2005 @ 11:07 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
THECROW1
Suspended due to non-functional email address
|
15. November 2005 @ 06:50 |
Link to this message
|
|
I got them from a coputer shop in Glasgow and i was going to ask what disks you would recommend thenk you for the website i am going to check it out right now
[url=http://imageshack.us][img=http://img1.imageshack.us/img1/9197/crowpcard8sy.jpg][/url]
|
|
