|
|
|
Unable to burn anything
|
|
|
haerski
Newbie
|
10. November 2005 @ 01:03 |
Link to this message
|
|
Hi,
I'm having problems with burning any discs (cd or dvd), regardless of the brand (tried Verbatim, Sony, TDK and Fuji), type of disc to be burnt or filetype. All sessions end immediately after the burn process starts with the same error message.
I'm running Nero 6.6.0.13 on WinXP Home SP2. Following is the log of my latest burn attempt. Thanks for any help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: < DVD+RW RW8165> Version: 1.01 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.01 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 144MB (148132kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
Burn DVD Image
12:31:50 #1 Text 0 File Reader.cpp, Line 127
Reader running
12:31:50 #2 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running
12:31:50 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
12:31:51 #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1343057 (298:27.32, 2623MB)
12:31:51 #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
12:31:51 #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVD+RW RW8165, Media type: DVD+R
12:31:51 #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:31:51 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1343058 (1343058) = #1343058/298:27.33
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1343058 blocks [DVD+RW RW8165]
--------------------------------------------------------------
12:31:51 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2750582784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1343058 | lead-out | 1 | 0x41 | 0x00
12:31:51 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:31:51 #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
12:31:51 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:31:51 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
12:31:51 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:31:51 #15 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B690600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:31:51 #16 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:31:52 #17 Text 0 File DVDR.cpp, Line 5610
Drive: DVD+RW RW8165
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:31:52 #18 CDR -1207 File DVDR.cpp, Line 4786
Book Type automatically set to: DVD-ROM
12:31:52 #19 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
12:31:54 #20 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x064D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
12:31:54 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc
12:31:55 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:31:55 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:31:55 #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
12:31:55 #25 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
12:31:55 #26 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:31:55 #27 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:31:55 #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
12:31:55 #29 Text 0 File DVDR.cpp, Line 5610
Drive: DVD+RW RW8165
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:31:55 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4.8.2004 7:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
|
10. November 2005 @ 02:42 |
Link to this message
|
hi and welcome..
Quote:
Nero Version: 6.6.0.13
- not too bad, latest 6.x version is 6.6.0.16, up to you if you update it, it's not causing your problems here
Quote:
Recorder: < DVD+RW RW8165> Version: 1.01
- i believe this is a Ricoh drive. if so, version 1.03 of your firmware is here - http://forum.rpc1.org/dl_firmware.php?download_id=1815
You need to update your firmware as your burner cannot recognise tyhe blank discs you're using, see further down the reply
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 144MB (148132kB)
Memory in use : 71 %
- try to close down more programs prior to dvd work/burning to free up more memory
Quote:
Recorder: DVD+RW RW8165, Media type: DVD+R
- the burner can't recognise that disc properly, here's an example (not the best example as it's CMC but it's an example) of what it should look like - Quote:
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
- you should have a 3line paragraph describing the disc when the firmware recognises the disc; your discs must be newer than your firmware knows what to do with. update your firmware
Quote:
Illegal disc
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
haerski
Newbie
|
10. November 2005 @ 03:31 |
Link to this message
|
Thanks creaky.
I updated the firmware via the link provided without any problems. I actually tried that before posting here but for some reason the update via Fujitsus homepage refused to co-operate. Oh well.
CD burning is working just fine now but still no luck with DVDs. Is this just a compatilbility issue between my drive and the type of blanks I'm using? New log below.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 150MB (154400kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
Burn DVD Image
15:18:27 #1 Text 0 File Reader.cpp, Line 127
Reader running
15:18:27 #2 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running
15:18:28 #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
15:18:28 #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1343057 (298:27.32, 2623MB)
15:18:28 #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
15:18:28 #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: DVD+RW RW8165, Media type: DVD+R
15:18:28 #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:18:28 #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1343058 (1343058) = #1343058/298:27.33
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1343058 blocks [DVD+RW RW8165]
--------------------------------------------------------------
15:18:28 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2750582784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1343058 | lead-out | 1 | 0x41 | 0x00
15:18:28 #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
15:18:28 #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
15:18:28 #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
15:18:28 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
15:18:28 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
15:18:28 #15 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B690600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:18:28 #16 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:18:28 #17 Text 0 File DVDR.cpp, Line 5610
Drive: DVD+RW RW8165
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
15:18:28 #18 CDR -1207 File DVDR.cpp, Line 4786
Book Type automatically set to: DVD-ROM
15:18:28 #19 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
15:18:51 #20 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x064D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
15:18:51 #21 CDR -1046 File Writer.cpp, Line 311
Illegal disc
15:18:51 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:18:51 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15:18:52 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
15:18:53 #25 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
15:18:53 #26 Text 0 File DVDR.cpp, Line 5610
Drive: DVD+RW RW8165
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
15:18:53 #27 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
15:18:53 #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
15:18:53 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4.8.2004 7:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
10. November 2005 @ 03:42 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
haerski
Newbie
|
10. November 2005 @ 03:52 |
Link to this message
|
OK, here goes. First the Verbatim disc:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:MCC-004-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [Mitsubishi Chemical Corp.]
Manufacturer ID : [MCC]
Media Type ID : [004]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x , 6x-16x]
----------------------------------------------------------------------------
[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
I've previously used the same DVD+R blanks from Verbatim succesfully , although they were only 4x certified but I'm thinking that that shouldn't make much of a difference.
Here's the info on the TDK blank, haven't used these ones before:
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:TDK-002-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [TDK Corp.]
Manufacturer ID : [TDK]
Media Type ID : [002]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
----------------------------------------------------------------------------
[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
|
|
haerski
Newbie
|
10. November 2005 @ 06:21 |
Link to this message
|
|
OK, apparently it is a compatibility issue. I bought some Fujifilm 8x blank DVDs and it's burning fine now. Interesting to see that what is supposed to be a "standard" is not a standard after all. Never been a fan of class action law suits but this is starting to pi** me off in several ways... Oh well, off to try and find some 4x Verbatim disks which provided me with a 100% success rate previously. Thanks for the help creaky.
|
|
Advertisement
|
|
|
Moderator
|
10. November 2005 @ 09:05 |
Link to this message
|
|
no worries. i hear ya, dvd burning can be a major pain in the backside, especially re media. i often wonder why i have such an annoying hobby. and i therefore have to wonder why i post so much re dvd burning :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
