|
|
|
Nero 7 problems burning DVD's
|
|
|
Jdpurvis
Suspended due to non-functional email address
|
25. November 2005 @ 18:26 |
Link to this message
|
|
I have a TDK 404N burner and recently upgraded to Nero 7. Following advice here, I didn't install INCD, and uninstalled Itunes. I used forceaspi to get consistent drivers. Running WIn XP, with 1 Gig ram. Can burn data CD's, but the burner consistently fails at DVD's, either video or data. Firmware is up to date. Using TDK (mfr ID TDK Corp, TTH02), supposedly will tolerate 16x. COnsistently get illegal disc error. Log follows:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GH5K - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD102BA atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TDK DVDRW0404N E: CDRom0
LITEON DVD-ROM LTD163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 1023MB (1048036kB)
Free physical memory: 241MB (247060kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.11.2005
ISO compilation
11:09:42 PM #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:09:42 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:09:42 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
11:09:42 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: TDK DVDRW0404N running
11:09:42 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:09:43 PM #6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
11:09:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1470223 (326:42.73, 2871MB)
11:09:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
11:09:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
11:09:44 PM #10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:09:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1470224 (1470224) = #1470224/326:42.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1470224 blocks [E: TDK DVDRW0404N]
--------------------------------------------------------------
11:09:44 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3011018752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1470224 | lead-out | 1 | 0x41 | 0x00
11:09:44 PM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:09:44 PM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
11:09:44 PM #15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
11:09:44 PM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
11:09:44 PM #17 Phase 28 File dlgbrnst.cpp, Line 1725
Speed measurement started
11:09:44 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:11:34 PM #19 Text 0 File WriterStatus.cpp, Line 116
<E: TDK DVDRW0404N> start writing Lead-Out at LBA 1470224 (166F10h), length 0 blocks
11:11:34 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:11:35 PM #21 Phase 29 File dlgbrnst.cpp, Line 1674
Speed measurement completed: 21.1x (29,218 KB/s)
11:11:35 PM #22 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3,324 KB/s)
11:11:35 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:11:35 PM #24 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
11:11:35 PM #25 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
11:11:35 PM #26 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
11:11:35 PM #27 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:11:35 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 16 6F 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
11:11:35 PM #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
E: TDK DVDRW0404N
11:11:35 PM #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
11:11:35 PM #31 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.4.21, size=57744 bytes, created 4/20/2003 12:53:31 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 1/5/2004 6:41:56 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any suggestions would be greatly appreciated.
Thanks,
Joe Purvis
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
25. November 2005 @ 18:56 |
Link to this message
|
Your log looks pretty clean, except a few things.
Quote:
Physical memory : 1023MB (1048036kB)
Free physical memory: 241MB (247060kB)
Memory in use : 76 %
You have tons of memory, yet you have very little left (it should be ok), but try to release/free up more by going to START, RUN and type msconfig, click on Startup and disable any unnecessary running programs in prior to burning. Another way to free up more memory is "ctrl+alt+del" and on Processes, you'll need to End Process on any applications/programs that you don't really needed.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1470223 (326:42.73, 2871MB)
What's wrong here..?? What are you trying to burn? This doesn't look right, it should be at least 4360MB or 4401MB at the max.
Quote:
Media type: DVD-R
Disc Manufacturer: TTH02 -
TDK is barely an OK media. I recommend you to use high quality such as Taiyo Yuden, Verbatim and Maxell (made in japan) for your next dvd burning project.
Quote:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 16 6F 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00
Again, your burner doesn't like the media you're using. See above reply for higher quality media.
Quote:
Burn process failed at 2.4x (3,324 KB/s)
Try 4X next time. Sometimes burning too low like 1X or 2X can be a pain as well. I've always burned all my backups at 4X and I've never made any "coasters".
Quote:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.4.21, size=57744 bytes, created 4/20/2003 12:53:31 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 1/5/2004 6:41:56 PM
You really need to get Roxio Zapper and completly wipe out Roxio from your system. It will only conflicts with your Nero and therefore you're getting coasters. Go here http://www.downloadjunction.com/product/store/15199 and download it to clean/wipe out Roxio immediately.
Here is a successful burned log of mine, you can compare mine to yours and see what's wrong.
David X
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 557MB (570388kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.11.2005
UDF/ISO compilation
12:58:38 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
12:58:38 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
12:58:38 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:58:38 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
12:58:38 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
12:58:38 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:58:38 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
12:58:38 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:58:39 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:58:39 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
12:58:39 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2253359 (500:44.59, 4401MB)
12:58:39 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)
12:58:39 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:58:39 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:58:39 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2253360 (2253360) = #2253360/500:44.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253360 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
12:58:39 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614881280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2253360 | lead-out | 1 | 0x41 | 0x00
12:58:39 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:58:39 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
12:58:39 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
12:58:39 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
12:58:39 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
12:58:39 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:58:39 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:58:39 PM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:58:39 PM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
12:58:39 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:12:55 PM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2253360 (226230h), length 0 blocks
1:12:55 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:13:19 PM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
1:13:19 PM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
This message has been edited since posting. Last time this message was edited on 25. November 2005 @ 18:58
|
|
Jdpurvis
Suspended due to non-functional email address
|
25. November 2005 @ 19:36 |
Link to this message
|
Well, I ran the Roxio Zapper and did a fresh reboot to get more memory. Can't burn faster than 2.4x (presumably burner won't go faster). I'm burning less than a full DVD of data (photos). I was easily able to smaller batch of photos to a CD earlier today.
Here's another log file. In the meantime, I'll study yours to see if I can figure anything else out. I also left a message for Nero support.
After I bought the DVD's, I noted they are not held in high regard here. But I figured since it was a TDK burner...
If I can't find anything else, I'll go out and buy some others (I understand verbatim are supposed to be good).
Log File:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GH5K - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVVA07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD102BA atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TDK DVDRW0404N E: CDRom0
LITEON DVD-ROM LTD163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 1023MB (1048036kB)
Free physical memory: 588MB (602196kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.11.2005
ISO compilation
12:25:52 AM #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:25:54 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
12:25:54 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
12:25:54 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:26:32 AM #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
12:26:33 AM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1470367 (326:44.67, 2871MB)
12:26:33 AM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
12:26:33 AM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
12:26:33 AM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:26:33 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1470368 (1470368) = #1470368/326:44.68
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1470368 blocks [E: TDK DVDRW0404N]
--------------------------------------------------------------
12:26:33 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3011313664, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1470368 | lead-out | 1 | 0x41 | 0x00
12:26:33 AM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:26:33 AM #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
12:26:33 AM #14 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
12:26:33 AM #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
12:26:33 AM #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3,324 KB/s)
12:26:33 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:26:33 AM #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
12:26:33 AM #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
12:26:33 AM #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
12:26:33 AM #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:26:33 AM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 16 6F A0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
12:26:33 AM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
E: TDK DVDRW0404N
12:26:33 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
12:26:33 AM #25 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Many thanks for your patience. I'll let you know if I find anything.
Joe
|
AfterDawn Addict
|
25. November 2005 @ 21:03 |
Link to this message
|
Quote:
Multisession : TRUE
Multisession type: : Start multisession
12:26:33 AM #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
I don't know, but mine is "not" set to "Multisession" and mine is "FALSE". Other than that, your log looks pretty clean. I've checked with your burner's firmware and it seems to be current. However, the below log shows that your burner still doesn't like the media you're using that's all. Perhaps the below is the problem, plus the "Multisession". It's a good thing that you've got Roxio out though because Nero and Roxio tend to conflict one another. Honestly, all I can say is to try with other media like Taiyo Yuden, Verbatim or Maxell (made in japan), and hopefully you'll get a successfully burned next time.
Quote:
12:26:33 AM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 16 6F A0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
12:26:33 AM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
E: TDK DVDRW0404N
12:26:33 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
12:26:33 AM #25 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3,324 KB/s)
|
|
Jdpurvis
Suspended due to non-functional email address
|
26. November 2005 @ 06:50 |
Link to this message
|
You were absolutely right, Alkohol. It was the media. I bought a few Verbatim discs, and was able to burn at 4X without difficulty. Then I tried a TDK again - Nero thought the maximum speed was 2.4x (they are supposed to be 16x discs) - and again I got the illegal disc error. It is interesting that the TDK drive doesn't tolerate the TDK media. NOte - would I have been better off if I had purchased 4x or 8x media? My burner is only capable of 4x for DVD's anyway.
I'll leave a message for TDK as well.
Many thanks for your patience and assistance.
Joe Purvis
|
|
Advertisement
|
|
|
AfterDawn Addict
|
26. November 2005 @ 07:44 |
Link to this message
|
Quote:
You were absolutely right, Alkohol. It was the media. I bought a few Verbatim discs, and was able to burn at 4X without difficulty. Then I tried a TDK again - Nero thought the maximum speed was 2.4x (they are supposed to be 16x discs) - and again I got the illegal disc error. It is interesting that the TDK drive doesn't tolerate the TDK media. NOte - would I have been better off if I had purchased 4x or 8x media? My burner is only capable of 4x for DVD's anyway.
I'll leave a message for TDK as well.
Many thanks for your patience and assistance.
Joe Purvis
@Joe
You're welcome buddy. You can get 8X Verbatim -- they should be fine. Meaning your burner should burn them at 4X regardless, this is the best and safest way to burn dvds anyways. Even if I have the 16X Verbatim DVD+R "Advanced Azo", I'd still burned them at 4X only.
Yeah, ironically it's interesting isn't it? However, keep in mind that sometimes burner's can be a different name, but was manufactured by another brand/company. For example: my Sony DRU 710A is actually a rebadged Lite-On 1633S burner.
Anyways, I'm glad you were able to have a successful burned after changing media to Verbatim. Yes... for all of my dvd burning projects/backups, I only let genuine Taiyo Yuden, Verbatim, and Maxell (made in japan) touches my burner.
I remembered I used to produced "coasters" long ago when I was using TDK and few Memorex aka CMC MAG (roughly 2 years ago), but since I changed to Taiyo Yuden, Verbatim and Maxell (m.i.j), I've never seen any "coasters".
Happy burning...!!
This message has been edited since posting. Last time this message was edited on 26. November 2005 @ 07:48
|
|
