|
|
|
Help with Nero & Sony DVD Burner ?
|
|
|
Nuttyme
Suspended due to non-functional email address
|
27. November 2005 @ 16:46 |
Link to this message
|
|
Hi every one
I have a problem with my DVD burner, Lately I'm getting Power calibration errors and failed burns, I never had a problem till I had to reformat and reinstall XP PRO with SP 2. I have updated Nero and dvd frimwear. DVD is sony DRU_710A about a 1 year old. Can you till me what might be the problem. Heres the log from NERO
********** Nero Recode 2 **********
Version: 2.2.6.17
1A22
Project type: Main Movie to DVD
Target size: DVD5 (2282925)
18:20:22 File LangStreamPatcher.cpp, Line 56
Command table patching started...
18:20:22 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD RW DRU-710A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\**** ******\My Documents\Nero Recode (31648940032 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
18:20:38 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14128 vobus] 5606.07MB -> 4458.69MB [R 0.80]
Video: 4022.11MB, extra: 436.57MB
Audio: 5 streams
0. 0. Dolby Digital 5.1-ch English 408.98MB [enabled]
1. 1. Dolby Digital 2-ch English 175.62MB [disabled]
2. 2. Dolby Digital 2-ch French 175.48MB [disabled]
3. 3. Dolby Digital 2-ch English 176.63MB [disabled]
4. 4. Dolby Digital 2-ch English 177.19MB [disabled]
Subpicture: 3 streams
0. 0. English 11.94MB [disabled]
1. 1. Spanish 11.92MB [disabled]
2. 2. French 2.85MB [disabled]
18:20:38 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
18:20:38 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
18:20:38 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
18:20:38 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2282925 required)
18:20:38 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4465.76MB obtained)
18:20:38 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
18:24:41 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_2.VOB
18:28:18 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_3.VOB
18:32:00 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_4.VOB
18:35:41 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_5.VOB
18:36:41 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 5606.07MB -> Expected 4465.60MB -> Output 4465.60MB
Finished error -0.00MB
Ratio encoded = 14115
Original encoded = 13
Slide encoded = 0
StillImage encoded = 0
Output extra size = 431.37MB
Source video size = 4465.69MB
Pictures Modified [I 4240] [P 160] [B 113789]
18:36:42 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (4465.75MB)
18:36:42 File NeroRecorderBase.cpp, Line 1096
Burning 9 files with total size of 4682682368 bytes on hard disk
18:36:42 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX175A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
56X CD-ROM F: CDRom0
SONY DVD RW DRU-710A G: CDRom1
SONY CD-RW CRX175A H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 222MB (228144kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.11.2005
NeroAPI
6:36:42 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
6:36:42 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
6:36:42 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
6:36:43 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
6:36:43 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
6:36:43 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:36:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
6:36:43 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:36:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
6:36:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:36:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
6:36:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:36:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
6:36:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2287008 | lead-out | 1 | 0x41 | 0x00
6:36:43 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
6:36:43 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
6:36:43 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
6:36:43 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
6:36:43 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:36:43 PM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
6:36:43 PM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
6:36:43 PM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
6:36:43 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:37:47 PM #24 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05FA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
6:37:47 PM #25 CDR -1106 File Writer.cpp, Line 311
Power calibration error
6:37:47 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:37:47 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:37:47 PM #28 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
6:37:47 PM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
18:37:49 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
18:37:49 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
Now if I run regedit and regscrubxp I can get it to burn about 2 times before it fails, or I have to uninstall nero and remove all trace of nero and then reinstall and get about 5 burns before I get failed burns again. Can you help with this. I just tried to backup some and that failed too.
Thanks
NuttyMe
This message has been edited since posting. Last time this message was edited on 28. November 2005 @ 16:41
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
27. November 2005 @ 20:32 |
Link to this message
|
@Nuttyme
I have the same DVD burner as yours and luckily I've never encountered any issues with "KEY_MEDIUM_ERROR" whatsoever. My Dru 710A BYX5 loves to burn all genuine TY, Verbs and Maxell (m.i.j) that I throw in. Hmmm... your log looks pretty clean, except a few things below.
Quote:
18:36:42 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
1A22-xxxx-xxxx-xxxx-xxxx-xxxx
Windows XP 5.1
You need to edit out your Nero serial before any hackers hacked your serial and use it for free.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
You're writing/buring too close to the edge, you need to customize it to 4360MB or at least 4400MB at the max with high quality media like Taiyo Yuden, Verbatim or Maxell (made in japan).
Quote:
Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Hmmm... doesn't look too good on the media. The only FUJI media I can trust is their FUJI 8X DVD+R "made in Japan" --> that's genuine Taiyo Yuden media right there. Since your DRU 710A burner is capable of Book Typing DVD+R into DVD-ROM and you've got Nero 6.6.0.18, why don't you try some Taiyo Yuden 8X DVD+R, Verbatim 8X/16X DVD+R or Maxell 8X DVD+R (made in Japan) and have Nero automatically book type them into DVD-ROM? It's more safer that way, not only that, but any of your dvd players can play them easily.
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Looks like your burner doesn't really like the media you're using. Again, try some high quality media like Taiyo Yuden, Verbatim and Maxell (made in Japan) for your next dvd burning project and hopefully you'll have a successful burned.
Quote:
Power calibration error
Meaning either the media is bad, your burner doesn't like the media, and or your burner is having a hard time reading the media. See above reply about high quality media.
Quote:
Burn process failed at 8x (11,080 KB/s)
4X is the best and safest way to go. Even if I used top notch media, I'd still go with 4X. That's the most recommendation speeds here at afterdawn.com.
*NOTE: this is good for DVD+R, DVD+RW, DVD+R DL media and it's for your future dvd burning only.
If you have the Nero Burning Rom or Nero Express set the Book Type to "Automatic" then whenever you use Nero Recode 2, Nero Express or Nero Burning Rom to burn, all your backups will automatically set the book type to DVD-ROM.
((Here's how to Book Type using Nero Burning Rom))
01) open up Nero StartSmart, then click on Nero Burning Rom
02) EXIT out the "New Compilation" when it pops up
03) click on "Chooses A Recorder" (it's a small burner icon next to (I) and the arrow down)
04) click on ?Options," then on "Book Type Settings," set to "Automatic" and click "OK" - that's it... easy as smoking. Now every time when you burn using a DVD+R, DVD+RW or DVD+R DL disc, Nero will ?automatically? change the Book Type into a DVD-ROM format.
|
|
andmerr
Suspended permanently
|
27. November 2005 @ 21:26 |
Link to this message
|
thats a very nice post alkohol, actually learnt something new about Nero.Thanks man
|
|
Nuttyme
Suspended due to non-functional email address
|
28. November 2005 @ 16:54 |
Link to this message
|
Thanks for the reply Alkohol, I have tried every thing you said to try. I have spend the last 2 days tring to get data backed up. I tried burning @ 1x , no luck. on burning to close to the edge, I was tring out recode 2 in Nero, Never messed with it. I like it alot, faster then DVD Shrink. The media is Staples DVD-R and I have burned with then before and burner liked them better,So I stuck with then, Never had a failed burn with then, I have tried maxwell and the burned failed with all but 2 of them out of a pack of 25. The burner loved to burn anything up till about march and started to get failed burns and power calibration error . I fixed that by uninstalling Nero and cleanup all the left over and do a clean install of Nero again and then it would work for a month or 2 and start acting up again, Now I can't it to do anything. Do you think its time to buy another one and have on hand, Staple has the DRU-810A on sale now for 79.95 ? I have no clue what is going on with it, Any other idea why. Thanks for all the help.
Nuttyme
|
|
Bigfatboy
Member
|
28. November 2005 @ 17:09 |
Link to this message
|
|
|
AfterDawn Addict
|
28. November 2005 @ 18:01 |
Link to this message
|
Quote:
Thanks for the reply Alkohol, I have tried every thing you said to try. I have spend the last 2 days tring to get data backed up. I tried burning @ 1x , no luck. on burning to close to the edge, I was tring out recode 2 in Nero, Never messed with it. I like it alot, faster then DVD Shrink. The media is Staples DVD-R and I have burned with then before and burner liked them better,So I stuck with then, Never had a failed burn with then, I have tried maxwell and the burned failed with all but 2 of them out of a pack of 25. The burner loved to burn anything up till about march and started to get failed burns and power calibration error . I fixed that by uninstalling Nero and cleanup all the left over and do a clean install of Nero again and then it would work for a month or 2 and start acting up again, Now I can't it to do anything. Do you think its time to buy another one and have on hand, Staple has the DRU-810A on sale now for 79.95 ? I have no clue what is going on with it, Any other idea why. Thanks for all the help.
Nuttyme
@Nuttyme
Before you're going to spend another $79.95 or $80 dollar, let's make sure that your burner is really dead and can no longer burner dvds anymore.
1) let's have one more burn with either a FUJI 8X DVD+R "made in japan" or Verbatim 8X/16X DVD+R, but make sure you set it to burn at 4X speed only. Now post up your Nero log again, so we can take a look at it alright.
2) let's do what Bigfatboy said. Go over http://sony.storagesupport.com/cdrw/diagnostics.htm and test your drive.
Again, "power calibration" meaning it's having a hard time reading/recognizing the media and its MID. Probably because it doesn't like the media you're using.
|
|
Bigfatboy
Member
|
28. November 2005 @ 18:22 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 28. November 2005 @ 18:22
|
|
Nuttyme
Suspended due to non-functional email address
|
28. November 2005 @ 19:30 |
Link to this message
|
|
Well since my last post, I pulled out my sony CDR, They were all stacked ( Bottom CD-Rom, Middle CDR, Top DVDR ) , Thought I would just burn through the dvds I had, Since I really didn't want to drive to staples with 11" of snow on the ground and crazy drivers smacking into each other. I first did my data backup and 4x and it burned just fine, Ok so far so good, Then I tried backing up my copy of sahara with recode 2 , burn @ 4x and backup just fine. I have not tried anything else yet,I will try tonight to backup something else. Now I did use the sony drive check and that failed and emailed results to sony. I used this the first time this happend and that failed back in march, emailed results to sony. No respones from Sony. Now the CD-Rom is connected to the primary cable and the DVD burner is on the secondary cable middle slot now. Before is was on the secondary cable first and CDR on middle. Tomorrow I'll go to staples and see if they carry the FUJI 8X DVD+R "made in japan" or Verbatim 8X/16X DVD+R. Staples is the only store in my town that carries computer media and parts.They carry very little media or computer parts. Heres the log from the data backup that burned
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/27/2005 7:54:09 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < 56X CD-ROM >Version: 6.94 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX175A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
56X CD-ROM F: CDRom0
SONY DVD RW DRU-710A G: CDRom1
SONY CD-RW CRX175A H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 245MB (251312kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.11.2005
ISO compilation
7:02:13 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:02:14 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
7:02:14 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
7:02:14 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:02:14 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:02:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1376431 (305:52.31, 2688MB)
7:02:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:02:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
7:02:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:02:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1376432 (1376432) = #1376432/305:52.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1376432 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
7:02:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2818932736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1376432 | lead-out | 1 | 0x41 | 0x00
7:02:15 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:02:27 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
7:02:27 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:02:27 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
7:02:27 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:02:27 PM #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
7:02:27 PM #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:02:27 PM #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
7:02:27 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:03:04 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
19:03:04.812 - SONY DVD RW DRU-710A\H1 T0 : Queue again later
7:11:51 PM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 1376432 (1500B0h), lenght 0 blocks
7:11:51 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:11:51 PM #24 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 1376431
7:12:15 PM #25 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
& heres the backup log from the movie
********** Nero Recode 2 **********
Version: 2.2.6.17
Project type: Main Movie to DVD
Target size: Custom (2232320)
19:44:01 File burn_dvdfiles.cpp, Line 407
Compile DVD: Cancel
Burn settings:
Target: SONY DVD RW DRU-710A
Number of copies: 1
Write speed: 5540 KB/s
Temp folder: C:\Documents and Settings\++++ ++++++\My Documents\Nero Recode (31650078720 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: true
Compress Adaptive: false
19:44:12 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [14128 vobus] 5606.07MB -> 4359.85MB [R 0.75]
Video: 3923.28MB, extra: 436.57MB
Audio: 5 streams
0. 0. Dolby Digital 5.1-ch English 408.98MB [enabled]
1. 1. Dolby Digital 2-ch English 175.62MB [disabled]
2. 2. Dolby Digital 2-ch French 175.48MB [disabled]
3. 3. Dolby Digital 2-ch English 176.63MB [disabled]
4. 4. Dolby Digital 2-ch English 177.19MB [disabled]
Subpicture: 3 streams
0. 0. English 11.94MB [disabled]
1. 1. Spanish 11.92MB [disabled]
2. 2. French 2.85MB [disabled]
19:44:12 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
19:44:13 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
19:44:13 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286467 sectors (2298496)
19:44:13 File burn_dvdfiles.cpp, Line 684
Compile DVD: begin deep analysis
19:56:30 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286467 sectors (2232320 required)
19:56:30 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.76MB (4465.76MB obtained)
19:56:30 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
19:59:10 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_2.VOB
20:01:29 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_3.VOB
20:03:53 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_4.VOB
20:06:12 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_5.VOB
20:06:40 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 5606.07MB -> Expected 4465.60MB -> Output 4465.60MB
Finished error -0.00MB
Ratio encoded = 14122
Original encoded = 6
Slide encoded = 0
StillImage encoded = 0
Output extra size = 431.37MB
Source video size = 4465.69MB
Pictures Modified [I 4162] [P 111] [B 114002]
20:06:43 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (4465.76MB)
20:06:43 File NeroRecorderBase.cpp, Line 1096
Burning 9 files with total size of 4682684416 bytes on hard disk
20:06:43 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : 56X CD-ROM atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
56X CD-ROM F: CDRom0
SONY DVD RW DRU-710A G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 213MB (218492kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.11.2005
NeroAPI
8:06:43 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
8:06:43 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
8:06:43 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
8:06:43 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
8:06:43 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-710A running
8:06:43 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:06:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:06:43 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:06:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
8:06:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:06:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-710A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
8:06:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:06:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [SONY DVD RW DRU-710A]
--------------------------------------------------------------
8:06:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2287008 | lead-out | 1 | 0x41 | 0x00
8:06:43 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
8:06:43 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:06:43 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
8:06:43 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
8:06:44 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:06:44 PM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
8:06:44 PM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
8:06:44 PM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
8:06:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:07:21 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
20:07:21.890 - SONY DVD RW DRU-710A\H1 T0 : Queue again later
8:21:37 PM #25 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-710A > start writing Lead-Out at LBA 2287008 (22E5A0h), lenght 0 blocks
8:21:37 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:21:37 PM #27 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 2287007
8:22:03 PM #28 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
20:22:08 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
Let me know if you see anything wrong or settings need to be changed, 1 question thou Could Heat in the case cause the DVD burner to give those errors ? I have 3 case fans, 1 in front and 2 in back, and I did remove the sony CDR from the middle slot in the case and left the CD-Rom and DVD where they are.
Thanks,
Nuttyme
PS- Sory this is long
This message has been edited since posting. Last time this message was edited on 28. November 2005 @ 19:32
|
AfterDawn Addict
|
29. November 2005 @ 00:18 |
Link to this message
|
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
Everything (both of your new logs) looks clean and good so far, except the above. Even if you have a successful burned at 4466MB, I'd still recommend to customize it to 4360MB or 4400MB at the max.
Anyways, I'm glad that you were able to have a successfully burned at 4X. Yes.... 4X is the best and safest speeds for burning.
Good luck and happy burning..!!
|
|
mcb247
Newbie
|
29. November 2005 @ 06:41 |
Link to this message
|
I don't have the Booktype option (I'm using Nero 6.3). Guess because it's an old version? What real benefit would this have?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
29. November 2005 @ 08:41 |
Link to this message
|
Quote:
I don't have the Booktype option (I'm using Nero 6.3). Guess because it's an old version? What real benefit would this have?
@mcb247
Maybe you need to update to the latest from Nero 6 Ultra 6.6.0.18 (remember just download package #1 and #2 only - the rest you don't need them). What kind of DVD burner do you have? Most of Lite-On, Sony, Plextor, BenQ and LG can book type easily.
What's the benefit of book typing? It certainly will play in any home dvd players you throw in. Meaning if you're burning using a DVD+R, DVD+RW or DVD+R DL disc and have Nero "Book Typing" into a DVD-ROM format, then this baby will play in any of your friends, relatives or family members stand alone dvd players regardless of how old is players. Notice all original/commercial dvds are pressed as DVD-ROM? Therefore, any of your top set home dvd players can play them easily.
|
|
