|
|
|
"Illegal disc" Error using Nero 7
|
|
|
brddaman
Newbie
|
1. December 2005 @ 15:16 |
Link to this message
|
|
Hi, i was using Nero 7 and using nero recode to burn dvds, and i had previously sucessfully burned dvds just fine but i have recently been getting these errors...here is my nero log
********** Nero Recode **********
Version: 2.2.7.2
*****************************************
Project type: Copy entire DVD
Target size: DVD5 (2282925)
16:53:17 File LangStreamPatcher.cpp, Line 56
Command table patching started...
16:53:17 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+RW-D28
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Brad\My Documents\Nero Recode (25615126528 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
16:53:43 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [1 vobus] 0.03MB -> 0.03MB [R 1.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [17379 vobus] 3363.16MB -> 3363.16MB [R 1.00]
Video: 3123.19MB, extra: 239.96MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 206.02MB [enabled]
Subpicture: 0 streams
16:53:43 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
16:53:43 File NeroRecorderBase.cpp, Line 505
Writing to disc: D
16:53:43 File NeroRecorderBase.cpp, Line 519
Free capacity on disc: 2283092 sectors (2295104)
16:53:44 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (1722049 required)
16:53:44 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (3363.38MB obtained)
16:53:44 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
16:53:44 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
16:56:35 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_2.VOB
16:59:09 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_3.VOB
17:01:27 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_4.VOB
17:01:47 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 3363.16MB -> Expected 3363.16MB -> Output 3363.16MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 17379
Slide encoded = 0
StillImage encoded = 0
Output extra size = 241.21MB
Source video size = 3121.95MB
Pictures Modified [I 0] [P 0] [B 0]
17:01:53 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (3363.38MB)
17:01:53 File NeroRecorderBase.cpp, Line 1126
Burning 9 files with total size of 3526756352 bytes on hard disk
17:01:53 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
serial number removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Recorder: <PHILIPS DVD+RW-D28> Version: 1.68 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+RW-D28 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
PHILIPS DVD+RW-D28 E: CDRom1
Generic DVD-ROM F: CDRom2
Generic DVD-ROM G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 21MB (21932kB)
Memory in use : 95
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.12.2005
NeroAPI
5:01:53 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
5:01:53 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
5:01:53 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
5:01:53 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
5:01:53 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
5:01:53 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+RW-D28 running
5:01:53 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
5:01:53 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
5:01:53 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
5:01:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1722591 (382:47.66, 3364MB)
5:01:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
5:01:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVD+RW-D28, Media type: DVD+R
5:01:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:01:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1722592 (1722592) = #1722592/382:47.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1722592 blocks [E: PHILIPS DVD+RW-D28]
--------------------------------------------------------------
5:01:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVD+RW-D28] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3527868416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1722592 | lead-out | 1 | 0x41 | 0x00
5:01:54 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:01:54 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
5:01:54 PM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
5:01:54 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
5:01:54 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
5:01:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:01:54 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x0c4a0600: Len x804
5:01:54 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
5:01:54 PM #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
5:01:54 PM #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
5:01:54 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:02:21 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x06fa0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5:02:21 PM #28 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: PHILIPS DVD+RW-D28
5:02:21 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:02:21 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:02:21 PM #31 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
5:02:21 PM #32 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
5:02:21 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
5:02:21 PM #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
5:02:21 PM #35 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
E: PHILIPS DVD+RW-D28
5:02:21 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
5:02:21 PM #37 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
17:02:26 File NeroRecorderBase.cpp, Line 932
Burn failed (3)
17:02:26 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
...what do i do???
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 11:51
|
|
Advertisement
|
 |
|
|
Senior Member
|
1. December 2005 @ 19:08 |
Link to this message
|
Hi,
Do I understand that you are trying new dics'? If this is the case, I think it might be your firmware.
Also, I saw that your memory is kind of low. Are you running a lot of proggies in the background?
First guess though is firmware. Try version 1.68 RPC-1
It is here...
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=24
But the version that you have, 1.68 is the latest "official" version.
Be aware that you can really screw up your drive if the flash goes wrong...
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
 |
Senior Member
|
1. December 2005 @ 21:06 |
Link to this message
|
A quick reply then i have to run.
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
if burner is external then that ? is ok. If it is internal, that needs to be fixed. Check out this thread on ASPI fixes:
http://forums.afterdawn.com/thread_view.cfm/259118
As JXP2307 stated you need to close down as many programs as possible when burning:
Quote:
Physical memory : 510MB (523056kB)
Free physical memory: 21MB (21932kB)
21 mb is not enough, not nearly enough for this. Do a right click on anything in your bottom tool bar, and close the programs. You can also do a Crtl+alt+del and shut down programs that way, but windows screams at you when you do it that way.
Quote:
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
You have a couple of DMAs off.
GlueEater posted this dma link in another thread, and it looks pretty good:
http://www.burstcopy.com/dma/xp/Quote:
Illegal disc
it doesn't like your disc. Try better media.
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
You have Nero's INCD packet writing software installed, and it gives problems to Nero. You need to un-install it, and Zap it using Nero's clean tool.
http://www.nero.com/nero6/enu/InCD_CleanTool.html
Give those things a try and post back if you still have problems. It may take me a day or two to get back to this.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 1. December 2005 @ 21:07
|
|
brddaman
Newbie
|
2. December 2005 @ 13:58 |
Link to this message
|
|
Alright i did all of that an still got the same error...this is my new log...
********** Nero Recode **********
Version: 2.2.7.2
******************************
Project type: Copy entire DVD
Target size: DVD5 (2282925)
18:03:39 File LangStreamPatcher.cpp, Line 56
Command table patching started...
18:03:39 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+RW-D28
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Brad\My Documents\Nero Recode (24796164096 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
18:05:41 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [1 vobus] 0.03MB -> 0.03MB [R 1.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [17379 vobus] 3363.16MB -> 3363.16MB [R 1.00]
Video: 3123.19MB, extra: 239.96MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 206.02MB [enabled]
Subpicture: 0 streams
18:05:41 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
18:05:41 File NeroRecorderBase.cpp, Line 505
Writing to disc: D
18:05:42 File NeroRecorderBase.cpp, Line 519
Free capacity on disc: 2283092 sectors (2295104)
18:05:42 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (1722049 required)
18:05:42 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (3363.38MB obtained)
18:05:42 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
18:05:42 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
18:08:50 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_2.VOB
18:11:31 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_3.VOB
18:13:40 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_4.VOB
18:14:03 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 3363.16MB -> Expected 3363.16MB -> Output 3363.16MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 17379
Slide encoded = 0
StillImage encoded = 0
Output extra size = 241.21MB
Source video size = 3121.95MB
Pictures Modified [I 0] [P 0] [B 0]
18:14:08 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (3363.38MB)
18:14:08 File NeroRecorderBase.cpp, Line 1126
Burning 9 files with total size of 3526756352 bytes on hard disk
18:14:08 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
serial number removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Recorder: <PHILIPS DVD+RW-D28> Version: 1.68 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+RW-D28 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
PHILIPS DVD+RW-D28 E: CDRom1
Generic DVD-ROM F: CDRom2
Generic DVD-ROM G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 51MB (52772kB)
Memory in use : 89
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.12.2005
NeroAPI
6:14:09 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
6:14:09 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
6:14:09 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
6:14:09 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
6:14:09 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
6:14:09 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+RW-D28 running
6:14:09 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:14:09 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
6:14:09 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
6:14:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1722591 (382:47.66, 3364MB)
6:14:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
6:14:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVD+RW-D28, Media type: DVD+R
6:14:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:14:09 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1722592 (1722592) = #1722592/382:47.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1722592 blocks [E: PHILIPS DVD+RW-D28]
--------------------------------------------------------------
6:14:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVD+RW-D28] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3527868416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1722592 | lead-out | 1 | 0x41 | 0x00
6:14:09 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:14:09 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
6:14:09 PM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
6:14:09 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
6:14:09 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
6:14:09 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:14:09 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x0c3a1200: Len x804
6:14:09 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
6:14:09 PM #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:14:09 PM #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
6:14:09 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:14:36 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x06fa0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:14:36 PM #28 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: PHILIPS DVD+RW-D28
6:14:36 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:14:36 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:14:36 PM #31 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
6:14:36 PM #32 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
6:14:36 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
6:14:36 PM #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
6:14:36 PM #35 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
E: PHILIPS DVD+RW-D28
6:14:36 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:14:36 PM #37 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
18:14:40 File NeroRecorderBase.cpp, Line 932
Burn failed (3)
18:14:41 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 11:52
|
Senior Member
|
3. December 2005 @ 17:36 |
Link to this message
|
Just a note, all the Nero 7 logs have been showing up as not haveing a atapi installed, you can ingnore that.
|
|
brddaman
Newbie
|
4. December 2005 @ 17:48 |
Link to this message
|
should i try using a different program than Nero recode
|
Senior Member
|
4. December 2005 @ 19:54 |
Link to this message
|
Why not attempt DVD Shrink?
Just let it burn with DVD Decrytper Instead of Nero.
It will rule out whether or not it is Nero your DVD drive, or the Discs.
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
|
brddaman
Newbie
|
5. December 2005 @ 12:44 |
Link to this message
|
i tried burning with DVD Decrypter and this is the log
I 17:17:51 DVD Decrypter Version 3.5.4.0 started!
I 17:17:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 17:17:51 Initialising SPTI...
I 17:17:51 Searching for SCSI / ATAPI devices...
I 17:17:52 Found 3 DVD-ROMs and 1 DVD+RW!
I 17:22:08 Operation Started!
I 17:22:08 Source File: C:\GLADIATOR__DIVX__DVD_RIP.ISO
I 17:22:08 Source File Sectors: 1,722,329 (MODE1/2048)
I 17:22:08 Source File Size: 3,527,329,792 bytes
I 17:22:08 Source File Implementation Identifier: DVD Shrink
I 17:22:08 Destination Device: [1:1:0] PHILIPS DVD+RW-D28 1.68 (E:) (ATA)
I 17:22:08 Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00) (Speeds: 2x, 2.4x)
I 17:22:08 Destination Media Sectors: 2,295,104
I 17:22:08 Write Mode: DVD
I 17:22:08 Write Type: SAO
I 17:22:09 Write Speed: MAX
I 17:22:09 Link Size: Auto
I 17:22:09 Test Mode: No
I 17:22:09 BURN-Proof: Enabled
I 17:22:09 Filling Buffer...
I 17:22:10 Writing LeadIn...
W 17:22:27 Failed to Write Sectors 0 - 31 - Cannot Write Medium - Incompatible Format
W 17:22:27 Retrying (1 of 20)...
W 17:22:38 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:22:38 Retrying (2 of 20)...
W 17:22:45 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:22:45 Retrying (3 of 20)...
W 17:22:52 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:22:52 Retrying (4 of 20)...
W 17:22:59 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:22:59 Retrying (5 of 20)...
W 17:23:06 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:06 Retrying (6 of 20)...
W 17:23:18 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:18 Retrying (7 of 20)...
W 17:23:25 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:25 Retrying (8 of 20)...
W 17:23:33 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:33 Retrying (9 of 20)...
I 17:23:40 Abort Request Acknowledged
W 17:23:41 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:41 Retrying (10 of 20)...
W 17:23:49 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:49 Retrying (11 of 20)...
W 17:23:59 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:23:59 Retrying (12 of 20)...
W 17:24:07 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:07 Retrying (13 of 20)...
W 17:24:14 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:14 Retrying (14 of 20)...
W 17:24:20 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:20 Retrying (15 of 20)...
W 17:24:30 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:30 Retrying (16 of 20)...
W 17:24:38 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:38 Retrying (17 of 20)...
W 17:24:48 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:48 Retrying (18 of 20)...
W 17:24:58 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:24:58 Retrying (19 of 20)...
W 17:25:06 Retry Failed - Cannot Write Medium - Incompatible Format
W 17:25:06 Retrying (20 of 20)...
W 17:25:13 Retry Failed! - Cannot Write Medium - Incompatible Format
E 17:48:42 Failed to Write Sectors 0 - 31 - Cannot Write Medium - Incompatible Format
I 17:48:42 Synchronising Cache...
I 17:48:43 Closing Track...
I 17:48:43 Finalising Disc...
E 17:48:43 Failed to Write Image!
E 17:48:43 Operation Failed! - Duration: 00:26:34
I 17:48:43 Average Write Rate: N/A - Maximum Write Rate: N/A
~Brad Hoffman
|
Senior Member
|
5. December 2005 @ 20:30 |
Link to this message
|
|
I gotta feelin it is a newer DVD that decrypter can't handle.
Try Nero recode with anydvd in the background...
The development on AnyDVD never stopped.
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 20:31
|
AfterDawn Addict
|
5. December 2005 @ 21:49 |
Link to this message
|
Quote:
Recorder: <PHILIPS DVD+RW-D28> Version: 1.68
Firmware looks up to date, but try to search for any current if there is one available.
Quote:
Physical memory : 510MB (523056kB)
Free physical memory: 51MB (52772kB)
Memory in use : 89
With only 51MB left, you're going to have a tough time burning. Try to disable any unnecessary programs at startup by going to START, RUN and type msconfig, and STARTUP. Or you can do "ctrl+alt+del" and "end process" on any unuse/unnecessary running programs -- it's eating up your memory. Best choice is to add another 512MB.
Quote:
Recorder: PHILIPS DVD+RW-D28, Media type: DVD+R
The above should have 3 lines, like these below (taken from mine):
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
Your firmware maybe up to date, but it looks like it still can not recognize the full media and its MID. I checked with rpc forum, but they only got the one you have. Perhaps, try to search on the net for any new available firmware and update your firmware.
Quote:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Your burner doesn't like the media -- possibly due to cheap media or cheap/bad dye. Try other high quality like Yuden, Verbatim and Maxell (made in japan).
Quote:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
You need to dump that InCD's program and or driver, it will only conflicts with Nero when burning. Therefore, it is likely that you're going to get "coasters". Go here http://www.nero.com/nero6/enu/InCD_CleanTool.html and download it to clean out InCD from your system.
Quote:
Destination Media Type: DVD+R (Disc ID: CMC MAG-E01-00)
Oh God.... not another CMC MAG. Try other high quality media like Yuden, Verbatim or Maxell (made in japan).
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 21:50
|
Senior Member
|
6. December 2005 @ 17:15 |
Link to this message
|
|
Try the firmware in my above post. It is the only one I could find besides v1.68
alkohol is 110% correct about the Media.
You would be suprised just how much good media will help. :)
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
|
brddaman
Newbie
|
7. December 2005 @ 13:39 |
Link to this message
|
in the program AnyDVD the program says that the drive is disabled! What to i do to enable it?
~Brad Hoffman
|
|
brddaman
Newbie
|
7. December 2005 @ 14:09 |
Link to this message
|
|
oh and then i try a different disc and it says no disc present...help!
~Brad Hoffman
|
|
Bruce999
Member
|
7. December 2005 @ 19:17 |
Link to this message
|
brddaman:
Pay careful attention to the last two items in the reply above by Alkohol.
-Get rid of the INCD stuff. It often causes "illegal disc" errors, and it often causes coasters. This is well documented, and Nero is aware of this. Packet writing software is a no-no, with Nero.
-Use quality media.
-Bruce
|
|
brddaman
Newbie
|
8. December 2005 @ 02:29 |
Link to this message
|
alright i reinstalled Nero 7 and the incd is gone...the media i have used before and has been sucessful. another note is that when i have a cd-r in my drive in my computer an icon of a cd replaces drive:e, shows the amount of free space adn when i have a DVD+R it says "cd drive" and says 0 free 0 used
~Brad Hoffman
|
Senior Member
|
8. December 2005 @ 05:54 |
Link to this message
|
TRY TO UPDATE YOUR FIRMWARE WITH THE LINK I PROVIDED ABOVE.
If your drive is not recognizing that it is a DVD+R, it IS your firmware. As alkohol also stated, you should check to see if you can find a more up to date version.
Give it a shot. What do you have to lose? 5 minutes of your time?
It will be well worth it.
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
|
brddaman
Newbie
|
8. December 2005 @ 11:47 |
Link to this message
|
|
alright in order to update my driver i uninstalled aspi with force aspi and updated it....this is my new log...no further advances
********** Nero Recode **********
Version: 2.2.7.2
serial number removed
Project type: Copy entire DVD
Target size: DVD5 (2282925)
16:30:08 File LangStreamPatcher.cpp, Line 56
Command table patching started...
16:30:08 File LangStreamPatcher.cpp, Line 135
All tables successfully patched!
Burn settings:
Target: PHILIPS DVD+RW-D28
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Brad\My Documents\Nero Recode (26467983360 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
16:30:43 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [1 vobus] 0.03MB -> 0.03MB [R 1.00]
Video: 0.02MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [17379 vobus] 3363.16MB -> 3363.16MB [R 1.00]
Video: 3123.19MB, extra: 239.96MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 206.02MB [enabled]
Subpicture: 0 streams
16:30:43 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
16:30:43 File NeroRecorderBase.cpp, Line 505
Writing to disc: D
16:30:43 File NeroRecorderBase.cpp, Line 519
Free capacity on disc: 2283092 sectors (2295104)
16:30:43 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283092 sectors (1722049 required)
16:30:43 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.16MB (3363.38MB obtained)
16:30:44 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
16:30:44 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 0.03MB -> Expected 0.03MB -> Output 0.03MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.02MB
Pictures Modified [I 0] [P 0] [B 0]
16:34:23 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_2.VOB
16:36:15 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_3.VOB
16:38:27 File NeroRecorder.cpp, Line 606
Added extra file VTS_01_4.VOB
16:38:49 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 3363.16MB -> Expected 3363.16MB -> Output 3363.16MB
Finished error -0.00MB
Ratio encoded = 0
Original encoded = 17379
Slide encoded = 0
StillImage encoded = 0
Output extra size = 241.21MB
Source video size = 3121.95MB
Pictures Modified [I 0] [P 0] [B 0]
16:38:52 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (3363.38MB)
16:38:52 File NeroRecorderBase.cpp, Line 1126
Burning 9 files with total size of 3526756352 bytes on hard disk
16:38:52 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
serial number removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Recorder: <PHILIPS DVD+RW-D28> Version: 1.68 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+RW-D28 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T D: CDRom0
PHILIPS DVD+RW-D28 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 15MB (15880kB)
Memory in use : 96
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.12.2005
NeroAPI
4:38:52 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
4:38:53 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
4:38:53 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
4:38:53 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
4:38:53 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
4:38:53 PM #6 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+RW-D28 running
4:38:53 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
4:38:53 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
4:38:53 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
4:38:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1722591 (382:47.66, 3364MB)
4:38:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
4:38:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVD+RW-D28, Media type: DVD+R
4:38:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:38:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1722592 (1722592) = #1722592/382:47.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1722592 blocks [E: PHILIPS DVD+RW-D28]
--------------------------------------------------------------
4:38:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PHILIPS DVD+RW-D28] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3527868416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1722592 | lead-out | 1 | 0x41 | 0x00
4:38:53 PM #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:38:53 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
4:38:53 PM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
4:38:53 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
4:38:53 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
4:38:53 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:38:53 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x06f26200: Len x804
4:38:53 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
4:38:53 PM #24 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
4:38:53 PM #25 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
4:38:53 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
4:39:22 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x06f80000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:39:22 PM #28 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: PHILIPS DVD+RW-D28
4:39:23 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:39:25 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:39:25 PM #31 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
4:39:25 PM #32 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
4:39:25 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
4:39:25 PM #34 Text 0 File DVDR.cpp, Line 6068
Drive: PHILIPS DVD+RW-D28
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
4:39:25 PM #35 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
E: PHILIPS DVD+RW-D28
4:39:25 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
4:39:25 PM #37 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
16:39:31 File NeroRecorderBase.cpp, Line 932
Burn failed (3)
16:39:31 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 05:52
|
Moderator
|
8. December 2005 @ 11:50 |
Link to this message
|
|
all 3 logfiles have serial numbers on display. i'm gonna have to edit them out
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
brddaman
Newbie
|
8. December 2005 @ 11:58 |
Link to this message
|
|
sorry...thank you
~Brad Hoffman
|
Moderator
|
8. December 2005 @ 12:09 |
Link to this message
|
|
no worries
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
brddaman
Newbie
|
10. December 2005 @ 04:07 |
Link to this message
|
|
so does anyone have any solutions to my problem...the media i have i have used before to write dvds and has been fine
~Brad Hoffman
|
Moderator
|
10. December 2005 @ 06:01 |
Link to this message
|
Quote:
Nero API version: 7.0.0.0
- update to 7.0.1.2 from here - http://www.nero.com/nero7/eng/nero7-up.php
Quote:
Recorder: <PHILIPS DVD+RW-D28> Version: 1.68
- your burner's firmware is up to date, however it was last updated March 2004 - http://forum.rpc1.org/dl_firmware.php?download_id=315 however the blank discs you're using aren't being recognised, see further down my comments
Quote:
Physical memory : 510MB (523056kB)
Free physical memory: 15MB (15880kB)
Memory in use : 96
- not good. you got no free memory, you need to close down more programs prior to ALL dvd work/burning to free up more memory
Quote:
Recorder: PHILIPS DVD+RW-D28, Media type: DVD+R
- the blank discs you're using aren't being recognised, here's an example (not the best example as it's CMC ie crap media but it's an example) of what it should look like. if firmware is up to date you'd have a 3line paragraph here like this -
Quote:
Recorder: DVDRW IDE1004, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
- even though your burner's not recognising the discs, we can use a free program such as dvd identifier to at least find out what exact discs you have there. download from here - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_id... and use it to 'identify' one of those discs and paste results here.
So basically the firmware's up to date (too old though), and either way the discs you're using are newer than your burner knows what to do with, so you may need to buy 'older' discs that are catered for on the firmware. You discs may be too 'new' for the firmware or it could be that the manufacturer has given up on updating the firmware; happens a lot with drives, they keep pushing out new drives and the firmware for older models gets left behind..
Quote:
Illegal disc
Invalid field in command
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 06:02
|
|
brddaman
Newbie
|
10. December 2005 @ 06:37 |
Link to this message
|
----------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:CMC MAG-E01-000]
----------------------------------------------------------------------------
Disc & Book Type : [DVD+R] - [Not Available]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [E01]
Product Revision : [Not Specified]
Blank Disc Capacity : [2,295,104 Sectors = 4.70 GB (4.38 GiB)]
Recording Speeds : [1x-2.4x , 4x , 6x-8x]
----------------------------------------------------------------------------
[ DVD Identifier V4.2.0 - http://DVD.Identifier.CDfreaks.com ]
----------------------------------------------------------------------------
~Brad Hoffman
|
Moderator
|
10. December 2005 @ 07:05 |
Link to this message
|
ugh!, - crap media - from your reply - Quote:
Unique Disc Identifier : [DVD+R:CMC MAG-E01-000]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG]
Media Type ID : [E01]
Remember in my previous reply i used an example of CMC Discs and it turns out you've got similar discs to my example. Ugh!.
Apart from the fact your burner can't recognise those 8x CMC Magnetics discs - see this from my sig - "..Memorex/CMC/Imation - don't let them near your Burner..." - http://forums.afterdawn.com/thread_view.cfm/232406
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 10. December 2005 @ 07:05
|
|
Advertisement
|
|
|
|
brddaman
Newbie
|
10. December 2005 @ 07:52 |
Link to this message
|
|
but like i have used the media before and it was fine
~Brad Hoffman
|
|
