|
|
|
Unspecified target error on Sony DVD+-RW DW-D56A
|
|
|
Payam33
Newbie
|
4. December 2005 @ 19:49 |
Link to this message
|
|
Hi,
I bought a DELL 9300 with Sony DVD+-RW DW-D56A as an optical drive.
I have Nero 6.6 intalled and I can burn CD's with no problem. I tried burning a DVD for the first time and after choosing the file, the program gets busy; 3 to 4 seconds in to the burning, it stops and gives me "unspecified target error" and end the burning!
What is wrong, I tried it with other programs and none of the other programs and burn a DVD either. Is it the blanck DVD that is not compatible?!I use Verbatim DVD +R
Thanx
|
|
Advertisement
|
 |
|
|
Moderator
|
5. December 2005 @ 11:09 |
Link to this message
|
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
Payam33
Newbie
|
5. December 2005 @ 16:08 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero version: 6.6.0.3 (Nero Express)
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <EV5340Z SXV044S >Version: 1.0 - HA 2 TA 0 - 6.6.0.3
Adapter driver: <dtscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : EV5340Z SXV044S 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
EV5340Z SXV044S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 457MB (468368kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.12.2005
ISO compilation
9:06:07 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:06:07 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
9:06:07 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running
9:06:07 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
9:06:07 PM #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
9:06:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1127769 (250:36.69, 2202MB)
9:06:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
9:06:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
9:06:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:06:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1127920 (1127920) = #1127920/250:38.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1127920 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------
9:06:13 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2309980160, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1127920 | lead-out | 1 | 0x41 | 0x00
9:06:13 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:06:13 PM #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
9:06:13 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:06:13 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
9:06:13 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:06:14 PM #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MCC.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 00 4D 43 43 00 00 - 00 00 00 30 30 31 00 38 ...MCC.....001.8
23 54 37 0A 02 5A 70 02 - C8 67 19 19 0A 0A 0E 0E #T7..Zp..g......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
9:06:14 PM #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
9:06:16 PM #19 SCSI -400 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B040000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
9:06:16 PM #20 CDR -400 File Writer.cpp, Line 311
Unspecified target error
9:06:16 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:06:16 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:06:16 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
9:06:16 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
9:06:16 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 12/2/2005 9:19:07 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
raage
Newbie
|
25. December 2005 @ 11:23 |
Link to this message
|
I recieved the same error, using Nero 6.6. i updated the firmware as well, directed to by SONY VAIO Update... but i still get this 'unspecified target error.'
|
|
Advertisement
|
|
|
Moderator
|
25. December 2005 @ 11:29 |
Link to this message
|
@Payam33 -
Quote:
Nero version: 6.6.0.3 (Nero Express)
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7
- firmware's up to date - http://codeguys.rpc1.org/firmwares.html#DW-D56A
Quote:
DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : EV5340Z SXV044S 1.0 dtscsi Port 2 ID 0 DMA: Off
- see next comment
Quote:
Existing drivers:
File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 12/2/2005 9:19:07 PM (Adapter driver for src)
- i don't know what dtscsi.sys is, but it would appear to be corrupt or not loaded properly (the question marks)
ps yuo mentioned burning cd's fine, dvd burners have 2 lasers, one for DVD and one for CD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 25. December 2005 @ 11:30
|
|
