|
|
|
Illegal Disc Error on Nero 6
|
|
|
psg225
Newbie
|
4. December 2005 @ 23:37 |
Link to this message
|
|
I'm using Nero 6.6.0.18 on Windows XP Pro SP2.
I've been brunding DVD's on this laptop for a while now and all of a sudden i'm now getting an Illegal disc error. I've been using Fujifilm Blank DVD+R's and my stock has run out and now I have four other brands, HP, TDK, Philips and Datawrite, all clearly marked as DVD+R and yet my laptop refuses to burn to them.
I also downloaded the demo version of CopyToDVD and tried that out to see if maybe it was a problem with Nero. However that software throws up the same error.
The same burner works fine as a CD burner but for some reason it now refuses to work as a DVD burner.
Any Ideas?
Cheers
Peter
|
|
Advertisement
|
 |
|
|
Moderator
|
5. December 2005 @ 10:35 |
Link to this message
|
let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
psg225
Newbie
|
5. December 2005 @ 12:11 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 19/07/2004 16:41:48
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: < DVD+RW RW8165> Version: 1.01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVD+RW RW8165 F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1038768kB)
Free physical memory: 540MB (553924kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.12.2005
ISO compilation
11:10:54 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:10:55 #2 Text 0 File Reader.cpp, Line 127
Reader running
11:10:55 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running
11:10:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:10:55 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:10:55 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1248527 (277:27.02, 2438MB)
11:10:55 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
11:10:55 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8165, Media type: DVD+R
11:10:55 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:10:55 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1248528 (1248528) = #1248528/277:27.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1248528 blocks [DVD+RW RW8165]
--------------------------------------------------------------
11:10:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2556985344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1248528 | lead-out | 1 | 0x41 | 0x00
11:10:55 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:10:55 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:10:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:10:55 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
11:10:56 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:10:56 #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A180600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
11:10:56 #18 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:11:00 #19 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04610000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
11:11:00 #20 CDR -1046 File Writer.cpp, Line 311
Illegal disc
11:11:00 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:11:00 #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:11:00 #23 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
11:11:00 #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
11:11:00 #25 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:11:00 #26 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
11:11:00 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 19/07/2004 16:41:48
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 21:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Cheers
Peter
|
Moderator
|
5. December 2005 @ 12:19 |
Link to this message
|
Quote:
Recorder: < DVD+RW RW8165> Version: 1.01
version 1.03 of your firmware is here, but dated April 2004!!, so the firmware is way out of date to cope with newer media.. -
http://forum.rpc1.org/dl_firmware.php?download_id=1815
Quote:
Recorder: DVD+RW RW8165, Media type: DVD+R
- your blanks discs aren't being recognised, due to the firmware being so old. this is similar to what you should see -
Quote:
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- ie a 3line paragraph when the firmware's up to date. The firmware has been neglected by Ricoh since April 2004 (unless their own website has something newer though i very much doubt it). see here for more info as i've gone into much detail on this particular drive/firmware over last few days - http://forums.afterdawn.com/thread_view.cfm/265841
Quote:
Illegal disc
- see previous comment
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 5. December 2005 @ 12:19
|
|
psg225
Newbie
|
5. December 2005 @ 12:52 |
Link to this message
|
|
Sorry but i'm confused. I'm reading your response and also the link to the other thread that you had running and are you telling me that my firmware is out dated and that there is no upgrade available or are you trying to point me to a firmware upgrade that i need to download and install? Sorry for the basic questions but i want to be sure i understand what advice your kindly offerring to me.
Cheers
Peter
|
AfterDawn Addict
|
5. December 2005 @ 22:39 |
Link to this message
|
Quote:
Recorder: < DVD+RW RW8165> Version: 1.01
In other words, creaky was saying that it has a newer version, which is 1.03, but it's going to have a tough time reading any of the latest media and their MID code (now or in the near future). Because of this: Last update: Fri Apr 30, 2004 9:56 am - it has been over a year already and there's no other new firmware add to it.
|
|
psg225
Newbie
|
6. December 2005 @ 03:53 |
Link to this message
|
|
Thanks for the guidance. I'm all sorted now. with the help of my local IT support today. Managed to obtain and install the firmware upgrade to 1.03 which has resolved the issue and i can now burn DVD's again.
Cheers
Peter
|
Moderator
|
6. December 2005 @ 11:05 |
Link to this message
|
|
okay, cool; just keep in mind that you might buy discs one day and the firmware of the burner won't be able to recognise/use them due to it being out of date and neglected by the manufacturer. it happens sometimes when newer burners are manufactured, they let some drives' firmware slip by the wayside.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
adrianicz
Newbie
|
19. December 2005 @ 11:55 |
Link to this message
|
|
Hey, guys! I got the same problem with Verbatim. So if it's possible, please for your help - somebody who is more experienced that I am. :)
====== *** Nero-Burning Rom, History File *** ======
Adrianicz
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-11-11 14:49:52
Nero version: 6.3.0.0
Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.3.0.0
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVD+RW RW8165 E: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 128MB (131644kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2005
ISO compilation
22:26:03 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:26:03 #2 Phase 83 File dlgbrnst.cpp, Line 1800
Virus scanning started
22:26:04 #3 Text 0 File Isodoc.cpp, Line 5876
Nero found 0 infected files among the 21 scanned files.
22:26:04 #4 Phase 84 File dlgbrnst.cpp, Line 1800
Virus scanning completed
22:26:04 #5 Text 0 File Reader.cpp, Line 118
Reader running
22:26:04 #6 Text 0 File Writer.cpp, Line 124
Writer DVD+RW RW8165 running
22:26:04 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
22:26:04 #8 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media
22:26:04 #9 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 602031 (133:47.06)
22:26:04 #10 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE
22:26:04 #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: DVD+RW RW8165, Media type: DVD+R
22:26:04 #12 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:26:04 #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 602032 (602032) = #602032/133:47.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 602032 blocks [ DVD+RW RW8165 ]
--------------------------------------------------------------
22:26:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ DVD+RW RW8165 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1232961536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
602032 | lead-out | 1 | 0x00 | 0x41
22:26:04 #15 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
22:26:04 #16 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.
22:26:04 #17 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
22:26:04 #18 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5 520 KB/s)
22:26:04 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:26:04 #20 SCSI -1066 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03F55000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:26:04 #21 SCSI -1066 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012AE00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:26:05 #22 Text 0 File DVDR.cpp, Line 3970
Set Booktype to DVD-ROM (0), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK
22:26:05 #23 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 4:09,696 (249696ms) -> OK
22:26:05 #24 Text 0 File DVDPlusRW.cpp, Line 603
Start write address at LBA 0
DVD high compatibility mode: Yes
22:26:32 #25 SCSI -1046 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04510000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
22:26:32 #26 CDR -1046 File Writer.cpp, Line 301
Illegal disc
22:26:33 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:26:33 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:26:34 #29 Phase 127 File dlgbrnst.cpp, Line 1800
Generating DVD high compatibility borders
22:26:34 #30 SCSI -1066 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
22:26:34 #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
22:26:34 #32 Phase 129 File dlgbrnst.cpp, Line 1800
Generating DVD borders completed successfully
22:26:34 #33 Text 0 File DVDR.cpp, Line 3970
Set Booktype to DVD+R (10), set mode 'drive EEPROM' (0) on DVD+R media, return: 0 -> OK
22:26:34 #34 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
22:26:34 #35 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5 520 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2005-09-14 20:17:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002-08-29 01:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 00:00
|
AfterDawn Addict
|
19. December 2005 @ 12:30 |
Link to this message
|
@adrianicz
You need to "edit" all your Nero serials out before some hackers hacked your serial and use it for free. You shoudn't post the whole logs, that's more than one log, all you need to post is just the very last section with ====Nero Burning Rom ======, but it's alright. Here's what I see.
Quote:
Nero version: 6.3.0.0
Nero is way way old, you need to update to the latest 6.6.0.18 -- nearly 90% of time times, updating will help to increase the burning performances.
Quote:
Recorder: < DVD+RW RW8165> Version: 1.03
Firmware seems to be current, according to rpc forum http://forum.rpc1.org/dl_firmware.php?download_id=1815
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axsaki Port 2 ID 0 DMA: Off
2 of your drivers (including your Ricoh burner and a dvd-rom's DMA is OFF, it needs to be turn back On. Here's what you need to do.
((To enable DMA back ON by "uninstalling" its driver ?for Win XP users? by alkohol))
Here are some helpful pictures for references.
A) on "DESKTOP" right click on "MY COMPUTER," left click on "PROPERTIES"
B) left click on "HARDWARE," left click on "DEVICE MANAGER"
C) left click on + sign of IDE ATA/ATAPI Controllers
D) double left click on either ?Primary? or ?Secondary IDE Channel?
E) left click on "DRIVER," left click on "UNINSTALL"
You will see a "Warning: you are about to uninstall this device from your system," just click "OK," now "SHUTDOWN" or "Restart" your computer
F) once you restarted your computer, Windows should automatically detect your DVD burner?s drive and re-install it for you. That's it...easy as smoking!!
**NOTE: do these steps only if the above process failed to bring DMA back on, or you can do exactly like the above steps, except this time you "Uninstall" it from the ?DVD/CD-ROM Drives?
****at Device Manager****
(A) left click on + sign of DVD/CD-ROM Drives
(B) double left click on your DVD burner or your DVD-ROM drive
(C) click on "DRIVER," "UNINSTALL," "OK" and then "Shutdown" or "Restart" your computer. That's it... easy as smoking!!!
Enjoyed it..!!
Quote:
22:26:04 #11 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: DVD+RW RW8165, Media type: DVD+R
Looks like either Nero or firmware is not recognizing the media code. Try to updat Nero to the latest and do a search on the net for any current firmware available for your Ricoh burner.
This message has been edited since posting. Last time this message was edited on 19. December 2005 @ 12:30
|
|
adrianicz
Newbie
|
20. December 2005 @ 01:22 |
Link to this message
|
It doesn't help. I've done anything you suggested - I've updated Nero to 6.6.0.18, I've tried to uninstall drivers and checked the newest firmware. Nothing helps.
|
|
Advertisement
|
|
|
Moderator
|
27. December 2005 @ 07:02 |
Link to this message
|
|
let's have latest section of logfile, however it would appear that the stumbling block is the firmware, ie it's too old to recognise the blank discs that you're using. firmware is what teaches your burner about blank discs/burn speeds and if it's too old it's not equipped to do either of those things. if the firmware's been out of date for this long the only thing to suggest is to buy a new burner; there's been a few of these Ricoh threads recently, at least a couple different drive models have the same exact problem
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
