|
|
|
My "Illegal Disc" Error on Nero 7
|
|
|
neomic2k6
Newbie
|
8. December 2005 @ 14:55 |
Link to this message
|
|
I was wondering if someone could please help me out with my Illegal Disc message...
here's is my Nero log file:
Premium Edition
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DW-D22A >Version: BYS2 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D22A IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-ROM CDU5212 IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM D: CDRom2
SONY CD-ROM CDU5212 E: CDRom1
SONY DVD RW DW-D22A J: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514864kB)
Free physical memory: 50MB (51368kB)
Memory in use : 90 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.12.2005
Burn DVD Image
7:40:52 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 71680KB of Memory
7:40:52 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
7:40:52 PM #3 Text 0 File Writer.cpp, Line 113
Writer J: SONY DVD RW DW-D22A running
7:40:52 PM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
7:40:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286026 (508:00.26, 4464MB)
7:40:52 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
7:40:52 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DW-D22A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
7:40:52 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:40:52 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286027 (2286027) = #2286027/508:0.27
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286027 blocks [J: SONY DVD RW DW-D22A]
--------------------------------------------------------------
7:40:52 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [J: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681783296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286027 | lead-out | 1 | 0x41 | 0x00
7:40:52 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:40:52 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
7:40:52 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:40:52 PM #14 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
7:40:52 PM #15 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
7:40:52 PM #16 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
7:40:52 PM #17 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:40:54 PM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 323
J: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x09c30000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7:40:54 PM #19 CDR -1046 File Writer.cpp, Line 302
Illegal disc
J: SONY DVD RW DW-D22A
7:40:54 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:40:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:40:54 PM #22 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
7:40:54 PM #23 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 10/15/2002 7:00:00 AM (Adapter driver for rec)
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created 10/15/2002 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
=======
Thanks to any help in advance..
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 17:01
|
|
Advertisement
|
 |
|
|
Senior Member
|
8. December 2005 @ 16:05 |
Link to this message
|
|
@neomic2k6,
Please edit your last post and remove your serial number. Trust me lots of guys have been posting around here looking for free numbers and hoping that someone would give theirs up. Please don't give away the farm here..
|
Senior Member
|
8. December 2005 @ 16:19 |
Link to this message
|
Here are a few possibilities,
1.Turn your DMA on
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600BB-22GUA0 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D22A IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-ROM CDU5212 IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
Here's how
http://www.burstcopy.com/dma/xp/
2. not sure of your exact model DVD/RW drive but check to see if your firmware is uptodate.
Quote:
Physical memory : 502MB (514864kB)
Free physical memory: 50MB (51368kB)
Memory in use : 90 %
Uncached PFiles: 0x0
your memory usage is very high, don't multi task, shut down any other programs which are running at the same time. Hit CTRL ALT DEL and bring up the windows task manager and kill any unneeded programs.
3. try not to burn so close to the edge,
take your write size down to 4300,
Quote:
7:40:52 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286026 (508:00.26, 4464MB)
try this and see if that helps. DMA and memory usage look like the biggest culprits that I see, more experienced eyes will pick up other things i'm sure.
Good Luck, hope that this helps.
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 16:23
|
Senior Member
|
8. December 2005 @ 16:29 |
Link to this message
|
Quote:
Check supported media : Disabled (0)
Try turning on your supported media check.
Are you trying to copy from another disk using the disk at once method? If so try unchecking that and write to the hard drive first, a little slower, but less burn errors.
Quote:
7:40:52 PM #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
|
Senior Member
|
8. December 2005 @ 16:29 |
Link to this message
|
Quote:
CdRomPeripheral : SONY CD-ROM CDU5212 IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
DMA Should be on. Check out this link to fix.
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
I learned recently from aD member Maxburn, that if you have an external drive that this is ok. If it is an internal drive, check out this aD thread that Maxburn has posted.
http://forums.afterdawn.com/thread_view.cfm/259118
Quote:
Physical memory : 502MB (514864kB)
Free physical memory: 50MB (51368kB)
Memory in use : 90 %
You don't have much free memory. You need to close out some other apps and proggies running in the background. Check the system tray.
Quote:
7:40:54 PM #19 CDR -1046 File Writer.cpp, Line 302
Illegal disc
J: SONY DVD RW DW-D22A
Nero doesn't like the disc you are trying to burn to. You need to use good quality media like Verbatim, or Taiyo Yuden.
Try these things, and let us know!
Oh, and (YELLING VERY LOUDLY) EDIT OUT YOUR SERIAL #!!!!!!!
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
 This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 16:30
|
Senior Member
|
8. December 2005 @ 16:32 |
Link to this message
|
|
@blivetNC
You beat my post by milliseconds!!! LOL!!!
You read my mind!!
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
Senior Member
|
8. December 2005 @ 16:35 |
Link to this message
|
|
Just lucky buddy, still trying to learn how to read these logs myself, now if AD could just install a serial number filter here on the website... I'm sure some guy somewhere in the Ukraine is writing furiously this evening with all those nice version 7 serial numbers.....
|
Senior Member
|
8. December 2005 @ 16:50 |
Link to this message
|
|
That filter is a good idea. Maybe you should suggest to a mod?
See ya round the water cooler!
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
|
neomic2k6
Newbie
|
8. December 2005 @ 17:05 |
Link to this message
|
|
When I actually burn, I have allmy other stuff turned off, but just because I was getting a log, I just left it on because I knew I would get the same error message.
|
Senior Member
|
8. December 2005 @ 17:12 |
Link to this message
|
|
Something is eating your memory, use the windows task manager to check what is happening in the background, you might be pleasently surprised..The log won't use any memory at all.
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 17:12
|
|
neomic2k6
Newbie
|
8. December 2005 @ 17:12 |
Link to this message
|
|
I just tried that DMA fix, and my Hardware doesnt have the Advanced Settings option that the document says to configure...
|
Senior Member
|
8. December 2005 @ 17:49 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 8. December 2005 @ 17:51
|
Senior Member
|
8. December 2005 @ 21:44 |
Link to this message
|
All men profess honesty as long as they can. To believe all men honest would be folly. To believe none so is something worse. -John Quincy Adams
|
|
rogerKN
Newbie
|
8. December 2005 @ 23:10 |
Link to this message
|
hey all.
i have the same illegal disc error. i have tried just about everything: installing the adaptec aspi, installing firmware of a newer edition of my drive, reinstalling the latest firmware for my drive, uninstalling other programs that might interfere,... nothing...
so here's my latest Nero log:
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56
ahead WinASPI: File 'C:\Program Files\CD-writer\nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: < DVD+RW RW8160> Version: 1.08 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: < DVD+RW RW8160 >Version: 1.08 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8160 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVD+RW RW8160 F: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 190MB (194964kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2005
ISO-compilatie
10:01:43 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:01:43 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
10:01:43 #3 Text 0 File Reader.cpp, Line 124
Reader running
10:01:43 #4 Text 0 File Writer.cpp, Line 113
Writer F: DVD+RW RW8160 running
10:01:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
10:01:43 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
10:01:44 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2243551 (498:34.01, 4381MB)
10:01:44 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
10:01:44 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: DVD+RW RW8160, Media type: DVD+R
10:01:44 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:01:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2243552 (2243552) = #2243552/498:34.2
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243552 blocks [F: DVD+RW RW8160]
--------------------------------------------------------------
10:01:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: DVD+RW RW8160] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4594794496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2243552 | lead-out | 1 | 0x41 | 0x00
10:01:44 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:01:44 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
10:01:44 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
10:01:44 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
10:01:44 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2,4x (3.324 kB/sec)
10:01:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:01:44 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x049ec400: Len x804
10:01:44 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
10:01:44 #21 Text 0 File DVDR.cpp, Line 6068
Drive: DVD+RW RW8160
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:01:44 #22 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
10:01:44 #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:02:07 #24 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x03390000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:02:07 #25 CDR -1046 File Writer.cpp, Line 302
Illegal disc
F: DVD+RW RW8160
10:02:07 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:02:07 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:02:07 #28 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
10:02:07 #29 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
10:02:07 #30 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
10:02:07 #31 Text 0 File DVDR.cpp, Line 6068
Drive: DVD+RW RW8160
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:02:07 #32 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
F: DVD+RW RW8160
10:02:07 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:02:07 #34 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2,4x (3.324 kB/sec)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26/10/2005 21:12:48 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
if any of you sees something out of order, please tell! i'm desperate...
oh yeah, my drive still writes some dvd's though. fuji +rw 4x and platinum +R 8x are no problem for my 2.4 speed drive. but my new imation DVD+R 8x disks just won't work. none of them.
|
Senior Member
|
9. December 2005 @ 01:55 |
Link to this message
|
|
|
rogerKN
Newbie
|
9. December 2005 @ 06:34 |
Link to this message
|
|
so that's it? all my discs are useless? noooooooo :'(
|
Senior Member
|
9. December 2005 @ 08:40 |
Link to this message
|
|
Don't feel bad, I'll bet 90% of the AD lifers here have fallen into the CMC MAG pit at least once in their lifetime. (The remainders are either too shamed to admit it or they read all the posts before they bought some.) But we all live and learn. (to listen to DocTY)
|
|
rogerKN
Newbie
|
9. December 2005 @ 09:56 |
Link to this message
|
hehe, too bad. 100dvd's... oh well, someone's interested in buying them as i got them pretty cheap.
anyway, i found a pdf file hidden on a disc that came with my computer which had some mediacodes that were supported by the drive. the imation code (moser bear) was not one of them :(. besides, Nero speeddrive told me that the available speeds with this disk were... 4x and 8x. my drive won't go faster than 2.4x... another problem i guess.
anyway, i'll probably buy hp discs now: they have mediacode MCC003 which is on the list of my drive, and in the 1st quality media list according to this site: http://www.digitalfaq.com/media/dvdmedia.htm
a bit more expensive but i guess they'll be worth the money...
|
AfterDawn Addict
|
9. December 2005 @ 10:02 |
Link to this message
|
|
Not all Imation are CMC, but an 8X disk may not be rated for 2.4X on that (2.4X)burner, the firmware doesn't recognize those disks, maybe there were no 8X disks around when that burner came out.
Perhaps a simulation with Nero and checking the avaiable speeds would help.
This message has been edited since posting. Last time this message was edited on 9. December 2005 @ 11:55
|
|
Advertisement
|
|
|
|
rogerKN
Newbie
|
12. December 2005 @ 01:06 |
Link to this message
|
well, my platinum disks are 8 speed, and those work without any trouble. wrote about 50 of those without any errors.
i checked those with Nero speed tool and it also says something like 'strategies: 4x-8x'... still... those work.
i'm puzzled. either way, i'm selling my discs to a friend and bought new ones ... HP8x... they do the job :)
|
|
