|
|
|
Disc Speed Error??
|
|
|
agemo
Newbie
|
11. December 2005 @ 04:56 |
Link to this message
|
|
I've been using nero to back up my xbox games for a while now and it has been successfull about 95% of the time. But last week I tried backing up another game and i got a disc speed error. I thogut it my just have been the dvds so i tried another one and got the same error. I've tried dowloading alcohol 120% but that program also gives me an error when i try to burn something. Here's the log for nero:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: < 16X16 DVD DUAL> Version: 1020 - HA 1 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < 16X16 DVD DUAL >Version: 1020 - HA 1 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : 16X16 DVD DUAL atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
16X16 DVD DUAL D: CDRom0
SONY CD-RW CRX216E E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 37MB (38060kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.12.2005
Burn DVD Image
10:46:41 AM #1 Text 0 File Reader.cpp, Line 126
Reader running
10:46:41 AM #2 Text 0 File Writer.cpp, Line 124
Writer 16X16 DVD DUAL running
10:46:41 AM #3 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
10:46:41 AM #4 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1278037 (284:00.37, 2496MB)
10:46:41 AM #5 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
10:46:41 AM #6 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: 16X16 DVD DUAL, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
10:46:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:46:41 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1278038 (1278038) = #1278038/284:0.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1278038 blocks [ 16X16 DVD DUAL ]
--------------------------------------------------------------
10:46:41 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ 16X16 DVD DUAL ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2617421824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1278038 | lead-out | 1 | 0x00 | 0x41
10:46:42 AM #10 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
10:46:42 AM #11 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
10:46:42 AM #12 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
10:46:42 AM #13 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5,540 KB/s)
10:46:42 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:46:42 AM #15 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 8:06,348 (486348ms) -> OK
10:46:42 AM #16 Text 0 File DVDR.cpp, Line 2008
Recording mode: Sequential Recording Mode
10:46:42 AM #17 Text 0 File Mmc.cpp, Line 20688
Set BUFE: JustLink -> ON , JustSpeed : ON
10:46:42 AM #18 Text 0 File DVDR.cpp, Line 2149
Start write address at LBA 0
DVD high compatibility mode: Yes
10:46:42 AM #19 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:47:23 AM #20 SCSI -1152 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x64 0xC0
10:47:23 AM #21 CDR -1152 File Writer.cpp, Line 304
Disc speed error
10:47:23 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:47:23 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
10:47:23 AM #24 Text 0 File DVDR.cpp, Line 2391
EndDAO: Last written address was -1
10:47:23 AM #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
10:47:23 AM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
10:47:23 AM #27 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 4:23:54 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 4:24:25 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----------------------------------------------------------------
Its never done this before and i have no clue what the problem could be. I've tried 4 different brands of dvds and it does the same thing.
Any sort of help would be greatly appreciated.
|
Moderator
|
11. December 2005 @ 06:26 |
Link to this message
|
Quote:
Nero version: 6.3.1.26 (Nero Express)
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: < 16X16 DVD DUAL> Version: 1020
- is this an Iomega burner by any chance ?. i'm having trouble finding the Iomega firmware page anyway at the moment
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- yup, Nero's too old to recognise your burner, update Nero
Quote:
Physical memory : 254MB (261104kB)
Free physical memory: 37MB (38060kB)
Memory in use : 85 %
- 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 11. December 2005 @ 06:26
|
|
agemo
Newbie
|
11. December 2005 @ 08:24 |
Link to this message
|
|
Well I am downlaoding the update right now. And I'll try to free up as much memory as possible. I'll kee you updated after i try to burn something. And I am using a centrios burner.
|
|
Advertisement
|
|
|
|
agemo
Newbie
|
12. December 2005 @ 10:36 |
Link to this message
|
Well I've updated Nero, freed up as much memory as possible and I still got an error.
Here it is:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: < 16X16 DVD DUAL> Version: 1020 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < 16X16 DVD DUAL >Version: 1020 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : 16X16 DVD DUAL atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
16X16 DVD DUAL D: CDRom0
SONY CD-RW CRX216E E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (261104kB)
Free physical memory: 120MB (123116kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.12.2005
Burn DVD Image
4:26:55 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
4:26:55 PM #2 Text 0 File Writer.cpp, Line 122
Writer 16X16 DVD DUAL running
4:26:55 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:26:55 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1278037 (284:00.37, 2496MB)
4:26:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
4:26:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: 16X16 DVD DUAL, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
4:26:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:26:55 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1278038 (1278038) = #1278038/284:0.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1278038 blocks [16X16 DVD DUAL]
--------------------------------------------------------------
4:26:55 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [16X16 DVD DUAL] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2617421824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1278038 | lead-out | 1 | 0x41 | 0x00
4:26:56 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:26:56 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:26:56 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:26:56 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
4:26:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:26:56 PM #15 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
4:26:56 PM #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
4:26:57 PM #17 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
4:26:57 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:27:53 PM #19 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C8C0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x29 0x00
4:27:53 PM #20 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0C350000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x29 0x00
4:27:53 PM #21 CDR -1114 File Writer.cpp, Line 311
Reset occurred
4:27:53 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:27:53 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:27:53 PM #24 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 31
4:31:18 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 7/16/2003 4:23:54 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 4:24:25 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
