|
|
|
dvd burn only gets half way through
|
|
|
needuhelp
Newbie
|
13. December 2005 @ 22:47 |
Link to this message
|
|
i am trying to burn a dvd using dvd shrink to extract the files and nero to burn them. I used the instructions from this site but my burn only got half way through and then had errors. I have wasted two disks so was hoping someone could look at my error log (i saw someone else did that...) hope someone can help (or be bothered to read this, i just don't know what to do otherwise)
1C83-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <Slimtype DVDRW SOSW-833S>Version: VRS2 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Slimtype DVDRW SOSW-833S >Version: VRS2 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-833S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-833S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 445MB (456176kB)
Free physical memory: 127MB (130832kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2005
UDF/ISO compilation
5:35:24 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
5:35:25 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
5:35:25 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:35:25 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
5:35:25 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
5:35:25 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
5:35:25 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: Slimtype DVDRW SOSW-833S running
5:35:25 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:35:25 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:35:25 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
5:35:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
5:35:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
5:35:26 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: Slimtype DVDRW SOSW-833S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
5:35:26 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:35:26 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: Slimtype DVDRW SOSW-833S]
--------------------------------------------------------------
5:35:26 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: Slimtype DVDRW SOSW-833S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
5:35:26 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:35:26 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
5:35:26 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
5:35:26 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
5:35:26 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)
5:35:26 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:35:27 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
5:35:27 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
5:35:27 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
5:35:27 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:36:58 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
17:36:58.750 - E: Slimtype DVDRW SOSW-833S : Queue again later
5:37:38 PM #28 Text 0 File Cdrdrv.cpp, Line 1197
17:37:38.640 - E: Slimtype DVDRW SOSW-833S : Queue again later
5:50:22 PM #29 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C 02 C0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x03ff0000: Len x10000
0x00 00 01 BA 44 AB 2F FE B5 ED 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 2A CD 24 AD 80 01 02 A4
0x25 E8 1E AD C3 1E CB E4 A5 23 15 26 7A B3 44 CE
5:50:22 PM #30 CDR -1135 File Writer.cpp, Line 302
Write error
E: Slimtype DVDRW SOSW-833S
5:50:22 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:50:23 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:50:23 PM #33 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 787135
5:50:23 PM #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 13. December 2005 @ 23:09
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
13. December 2005 @ 23:04 |
Link to this message
|
Quote:
1C83XXXXXXXXXXXXXXXXXXXXXXXXXX
You need to EDIT and TAKE OUT your Nero serial key, before any hackers hacked your serial and use it for free.
Quote:
Recorder: <Slimtype DVDRW SOSW-833S>Version: VRS2
I have no idea what kind of burner is this. Do you have the latest firmware by chance? If not, then check with your burner's manufacture to see if there's any available. It'll help to increase the burning performances and media compatibility.
Quote:
Physical memory : 445MB (456176kB)
Free physical memory: 127MB (130832kB)
Memory in use : 71 %
445MB is ok, but your system is using too much memory. Try to release or free up more if you can in prior to burning.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
You're writing too close to the edge, try to customize to 4360MB or at least 4400MB at the max.
Quote:
Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
Is this a genuine Yuden media? Flip up-side-down and tell me the inner id code number.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C 02 C0 00 00 20 00
Somehow your burner is having a hard time reading/writing to the media. Try other DVD+Rs (genuine Taiyo Yuden, Verbatim and Maxell (Hitachi - made in japan) for your next dvd burning project. Remember to update the firmware if there is any available for your drive.
Quote:
Write error
E: Slimtype DVDRW SOSW-833S
See above reply, something went wrong. Therefore, you're getting a write error.
Quote:
Burn process failed at 8x (11,080 KB/s)
Try to slow down to 4X (I highly recommend it -- it's the best and safest).
Quote:
Existing drivers:
You're missing some "Existing drivers" here. It should be something similar like these below, taken from a log of mine:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
|
|
needuhelp
Newbie
|
13. December 2005 @ 23:27 |
Link to this message
|
|
inner id code number = IFPI BD03 (i hope that's what you meant)
also, once i have already ripped the files from the cd can i make them smaller again?
I have been trying to find firmware but i seem to be finding a few discussion boards from people with the same burner having the same problem... anyway i am not really sure where to look for it but i will try. SOrry i realise i'm pretty hopeless but i really appreciate your help.
|
AfterDawn Addict
|
13. December 2005 @ 23:51 |
Link to this message
|
Quote:
inner id code number = IFPI BD03 (i hope that's what you meant)
also, once i have already ripped the files from the cd can i make them smaller again?
I have been trying to find firmware but i seem to be finding a few discussion boards from people with the same burner having the same problem... anyway i am not really sure where to look for it but i will try. SOrry i realise i'm pretty hopeless but i really appreciate your help.
Is this a 8X or 4X? I'm trying to recall them 4X hub id code. It's been too long since I use 4X -- (I primarily used 8X Yuden, but burned at 4X only). Once you flipped up-side-down and look at the inner hub (inside small inner ring), it should read something like GDXXXX, GGXXXX or TGXXXX (XXXX = numbers). And if you don't have those, then I'm afraid your media is NOT genuine Taiyo Yuden.
You mean DVD files? If so, then yes... but you'll need Nero Recode 2 or DVD Shrink to encode and compress the files.
What brand and model is your dvd burner?
This message has been edited since posting. Last time this message was edited on 13. December 2005 @ 23:57
|
Senior Member
|
14. December 2005 @ 00:02 |
Link to this message
|
|
I am guessing that is an acer oem in a notebook. If that is the case I think vrs3 is out. Check the acer site to see.
|
|
needuhelp
Newbie
|
14. December 2005 @ 00:05 |
Link to this message
|
it's a SlimtypeDVDRW SOSW-833S that's all i know, it came with the Acer Aspire 3500. I went to this site to find an update however it said there was none (http://forum.rpc1.org/dl_firmware.php?download_id=2101). I will compress it again with shrink and try again at the slower speed...
|
AfterDawn Addict
|
14. December 2005 @ 00:17 |
Link to this message
|
|
|
needuhelp
Newbie
|
14. December 2005 @ 00:21 |
Link to this message
|
|
oh sorry about that. umm... there is nothing there at all hey, other than the letters i said before and LAZER AZO in the centre clear part. So I spose it's no good then?? Good enough to have a few tests with though?
I updated, reset and am shrinking it now.
|
AfterDawn Addict
|
14. December 2005 @ 00:29 |
Link to this message
|
Quote:
oh sorry about that. umm... there is nothing there at all hey, other than the letters i said before and LAZER AZO in the centre clear part. So I spose it's no good then?? Good enough to have a few tests with though?
I updated, reset and am shrinking it now.
No problem... I guess you might have some fake Taiyo Yuden then. Like I said if it's genuine Yuden media, then when you flipped up-side-down and look at the inner hub ring, you'll see GDXXXX, GGXXXX or TGXXXX (XXXX = numbers). Yeah... try to have DVD Shrink "customize" to 4360MB or 4400MB at the max, and REMEMBER to burn at 4X only (it's the best and safest speeds for dvd burning).
|
AfterDawn Addict
|
14. December 2005 @ 00:45 |
Link to this message
|
Here's how to "customize" your dvd size using DVD Shrink.
Hope everything else works for you after updating the firmware, changing the size on DVD Shrink and burning at 4X speeds.
|
|
needuhelp
Newbie
|
14. December 2005 @ 01:44 |
Link to this message
|
it didn't even get as far as it did last time...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <Slimtype DVDRW SOSW-833S>Version: VRS3 - HA 1 TA 2 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Slimtype DVDRW SOSW-833S >Version: VRS3 - HA 1 TA 2 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-833S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-833S E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 445MB (456176kB)
Free physical memory: 67MB (69360kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2005
UDF/ISO compilation
9:24:21 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
9:24:21 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
9:24:21 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:24:21 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
9:24:21 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 64512KB of Memory
9:24:21 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:24:21 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: Slimtype DVDRW SOSW-833S running
9:24:21 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:24:21 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:24:21 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
9:24:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2234671 (496:35.46, 4364MB)
9:24:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:24:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: Slimtype DVDRW SOSW-833S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
9:24:22 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:24:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2234672 (2234672) = #2234672/496:35.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234672 blocks [E: Slimtype DVDRW SOSW-833S]
--------------------------------------------------------------
9:24:23 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: Slimtype DVDRW SOSW-833S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4576608256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2234672 | lead-out | 1 | 0x41 | 0x00
9:24:23 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:24:23 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
9:24:23 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
9:24:23 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
9:24:23 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
9:24:23 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:24:23 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
9:24:23 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
9:24:23 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
9:24:23 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:24:54 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
21:24:54.671 - E: Slimtype DVDRW SOSW-833S : Queue again later
9:25:34 PM #28 Text 0 File Cdrdrv.cpp, Line 1197
21:25:34.687 - E: Slimtype DVDRW SOSW-833S : Queue again later
9:36:34 PM #29 SPTI -1114 File SCSIPassThrough.cpp, Line 323
E: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 01 22 80 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x0a830000: Len x10000
0x00 00 01 BA 44 05 36 8B F5 75 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 B9 3D FF 40 1C 00 35 E7 79
0x00 64 00 EF D8 49 14 8C F7 3D EE F6 EF 37 6B A6
9:36:34 PM #30 CDR -1114 File Writer.cpp, Line 302
Reset occurred
E: Slimtype DVDRW SOSW-833S
9:36:34 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:36:34 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:36:35 PM #33 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 74367
9:36:35 PM #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
14. December 2005 @ 06:35 |
Link to this message
|
Quote:
Physical memory : 445MB (456176kB)
Free physical memory: 67MB (69360kB)
Memory in use : 84 %
Its worse this time then before. Free up some mem. I reccomend enditall2. It is free just google to find it.
|
|
needuhelp
Newbie
|
14. December 2005 @ 13:38 |
Link to this message
|
|
ahh my... the problem was much more simple than i thought. actually it was something pretty stupid that i should have thought of myself. i assume it was affecting the memory and stopping the burning. i was burning the files from my external hard drive. as soon as i transferred the files to my c drive and burnt again it worked fine... even when i forgot to change it to X4. thanks so much for all your help... at least nothing else can i wrong now I HAVE FIXED IT ALL :P
|
|
Advertisement
|
|
|
AfterDawn Addict
|
14. December 2005 @ 13:51 |
Link to this message
|
|
Even if you never stated that (the files you're trying to burn) is located at another hard drive from the begining this time, it's wise and helpful for others to know next time. Glad you figured it out yourself.
Happy burning!!
|
|
