|
|
|
Nero 7 Premium, burning speed issue
|
|
|
grubbins
Newbie
|
14. December 2005 @ 08:50 |
Link to this message
|
|
Hi all, i am using nero 7 premium and trying to copy a disc using both burning rom/nero express, the trouble is that when the burning is finished it then says burn failed at 2.4x, the problem is that i have tried to change the burn speed but to no avail because as soon as i insert a blank verbatim d/l disc into a drive nero sets the burn speed another issue is that i cannot simulate! Please help as i am at my wits end because it's cost me a small fortune sofar in d/l disc's, i have included a log file all help is appreciated, thanks.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.00 - HA 1 TA 2 - 7.0.1.4
Adapter driver: <USB> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 4 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U55A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-U55A F: CDRom0
HL-DT-ST DVDRRW GSA-2164D G: CDRom2
NERO IMAGEDRIVE2 H: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 265MB (272044kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2005
Burn DVD Image
02:37:21 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
02:37:21 #2 Text 0 File Reader.cpp, Line 124
Reader running
02:37:21 #3 Text 0 File Writer.cpp, Line 113
Writer G: HL-DT-ST DVDRRW GSA-2164D running
02:37:21 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8332378112
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=904:07.19 ( 4068544) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\movies\Image.nrg>
02:37:21 #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
02:37:21 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4068543 (904:07.18, 7946MB)
02:37:21 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
02:37:21 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRRW GSA-2164D, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
02:37:21 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
02:37:21 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 4068544 (4068544) = #4068544/904:7.19
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4068544 blocks [G: HL-DT-ST DVDRRW GSA-2164D]
--------------------------------------------------------------
02:37:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: HL-DT-ST DVDRRW GSA-2164D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8332378112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4068544 | lead-out | 1 | 0x41 | 0x00
02:37:21 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
02:37:21 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
02:37:21 #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
02:37:21 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
02:37:21 #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3,324 KB/s)
02:37:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
02:37:21 #18 Text 0 File DVDPlusDualLayer.cpp, Line 463
Disc finalized, LBA total Image size: 4068544 (7946MB), Last LBA L0: 2034287 (3973MB)
02:37:21 #19 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 2034288 (1F0A70h, 3973MB) -> OK, confirmed setting
02:37:21 #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1
02:37:21 #21 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
02:37:21 #22 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#....
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........
02:37:21 #23 Text 0 File DVDR.cpp, Line 5400
Drive: HL-DT-ST DVDRRW GSA-2164D
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
02:37:21 #24 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
02:37:21 #25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
02:59:09 #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1910
Burning Layer 2
02:59:09 #27 Text 0 File DVDPlusDualLayer.cpp, Line 1921
Perform layer 1 to 2 jump before writing at address 2034288 (1F0A70h)
03:20:06 #28 Text 0 File WriterStatus.cpp, Line 116
<G: HL-DT-ST DVDRRW GSA-2164D> start writing Lead-Out at LBA 4068544 (3E14C0h), length 0 blocks
03:20:06 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
03:21:38 #30 SPTI -600 File SCSIPassThrough.cpp, Line 323
G: CdRom2: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x033de200: Len x20
03:21:38 #31 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
03:21:39 #32 CDR -1114 File ThreadedTransferInterface.cpp, Line 1937
Reset occurred
G: HL-DT-ST DVDRRW GSA-2164D
03:21:39 #33 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
03:21:55 #34 Phase 127 File dlgbrnst.cpp, Line 1725
Generating DVD high compatibility borders
03:21:55 #35 Phase 129 File dlgbrnst.cpp, Line 1725
Generating DVD borders completed successfully
03:21:55 #36 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.65a, size=20016 bytes, created 23/03/2004 17:54:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\usb8023.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=12672 bytes, created 03/08/2004 23:04:34 (Adapter driver for rec)
File 'Drivers\usb8023x.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=12672 bytes, created 03/08/2004 23:04:34 (Adapter driver for rec)
File 'Drivers\usbcamd.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=23808 bytes, created 31/03/2003 12:00:00 (Adapter driver for rec)
File 'Drivers\usbcamd2.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=23936 bytes, created 31/03/2003 12:00:00 (Adapter driver for rec)
File 'Drivers\usbd.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=4736 bytes, created 31/03/2003 12:00:00 (Adapter driver for rec)
File 'Drivers\usbehci.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=26624 bytes, created 03/08/2004 23:08:38 (Adapter driver for rec)
File 'Drivers\usbhub.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=57600 bytes, created 03/08/2004 23:08:44 (Adapter driver for rec)
File 'Drivers\usbintel.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=16000 bytes, created 03/08/2004 23:08:58 (Adapter driver for rec)
File 'Drivers\usbohci.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=17024 bytes, created 03/08/2004 23:08:38 (Adapter driver for rec)
File 'Drivers\usbport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=142976 bytes, created 03/08/2004 23:08:44 (Adapter driver for rec)
File 'Drivers\usbprint.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=25856 bytes, created 03/08/2004 23:01:26 (Adapter driver for rec)
File 'Drivers\USBSTOR.SYS': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=26496 bytes, created 03/08/2004 23:08:48 (Adapter driver for rec)
File 'Drivers\usbuhci.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=20480 bytes, created 03/08/2004 23:08:38 (Adapter driver for rec)
File 'Drivers\usbvideo.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=78464 bytes, created 03/08/2004 23:10:12 (Adapter driver for rec)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03/08/2004 22:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
14. December 2005 @ 09:22 |
Link to this message
|
Hi there,
Before going crazy using Dual Layer media, get yourself a few DVD+RW and get your burner burning.
Once everything works with DVD+RW, then try a Dual Layer media.
*Then* if it fails, you know you have issues with those Dual Layer Media.
When someone has burning issues, I always suggest using Re-Writable media and burn at the lowest speed.
Then only change 1 thing at a time.
Use the same media, but burn faster.
Then try the Dual Layer media etc...
My 2 cents...
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
bandoogie
Junior Member
|
14. December 2005 @ 09:28 |
Link to this message
|
|
I have the same problem as this guy. I've been burning 16x media for weeks now, as well as 8x and now all of a sudden I'm getting the same failed at 2.4x error. The only difference w/ me being that my disc doesn't even write as soon as I click burn I get this error. I don't know what the hell's going on. I actually went to the store today to return a 100 pack of memorex dvd's for fujifilms and I still have the same problem, can anyone help me? Thanks.
|
|
bandoogie
Junior Member
|
14. December 2005 @ 09:33 |
Link to this message
|
|
Here is my error log
Cory
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 3:21:30 PM
Nero Version: 6.6.0.6 (Nero Express)
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3520A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 D: CDRom0
_NEC DVD_RW ND-3520A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 151MB (155416kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2005
UDF/ISO compilation
2:20:12 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
2:20:12 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
2:20:12 PM #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:20:12 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
2:20:12 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
2:20:12 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:20:12 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:20:13 PM #8 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
2:20:13 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
2:20:13 PM #10 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
2:20:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: _NEC DVD_RW ND-3520A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
2:20:13 PM #12 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:20:13 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD_RW ND-3520A]
--------------------------------------------------------------
2:20:13 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [_NEC DVD_RW ND-3520A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
2:20:13 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:20:13 PM #16 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
2:20:13 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:20:13 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
2:20:13 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:20:13 PM #20 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode
2:20:13 PM #21 Text 0 File Mmc.cpp, Line 21079
Set BUFE: Buffer underrun protection -> ON
2:20:13 PM #22 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes
2:20:13 PM #23 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:20:13 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x30 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
2:20:13 PM #25 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:20:13 PM #26 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:20:13 PM #27 Text 0 File DVDR.cpp, Line 5970
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:20:13 PM #28 Text 0 File DVDR.cpp, Line 5094
Drive: _NEC DVD_RW ND-3520A
Book Type request [NEC]: DVD-ROM
Book Type setting not supported for the loaded disc type
Changing the Book Type was finished with error, return code -4
2:20:13 PM #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1764
Illegal disc
2:20:13 PM #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1764
Could not perform start of Disc-at-once
2:20:13 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 8/24/2005 11:00:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 1:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 14. December 2005 @ 09:54
|
Senior Member
|
14. December 2005 @ 09:48 |
Link to this message
|
Hi there,
Quote:
Recorder: <_NEC DVD_RW ND-3520A> Version: 1.04 - HA 1 TA 1 - 6.6.0.6
Your firmware is outdated, the latest is v3.06 for your drive.
http://www.de.nec.de/software/2015_FW_ND-3520A_306win.zip
This usually helps, when using new media (8x, 16x).
Latest v6 Nero is v6.6.0.18, you are not so outdated, but I always suggest using the latest when having issues.
Quote:
Memory in use : 70 %
Try to free up some memory, don't have to much stuff running in the background.
If you don't stop them (Like I do) burn slow, x2.0 or x2.4 (Which you tried, so let's keep it slow <grin> )
Returning those memorex was a smart move, they are the worse media that exists.
Upgrade the firmware 1st, then see if it works.
You are a few versions behind !
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
grubbins
Newbie
|
14. December 2005 @ 10:14 |
Link to this message
|
|
Thx cougar_ii, burned 100's dvd's/data disc's fine maybe just these verbatim d/l's? maybe i should take them back.
|
Senior Member
|
14. December 2005 @ 16:43 |
Link to this message
|
|
Hi there,
Upgrade your firmware to v3.06 before you return them.
I'm convinced the upgrade will definitly help !
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
grubbins
Newbie
|
14. December 2005 @ 17:34 |
Link to this message
|
|
Hi cougar_ii, i presume your talking about bandoogie's driver and not mine?
grubbins.
|
Senior Member
|
16. December 2005 @ 08:53 |
Link to this message
|
|
Hi there,
Yep, Firmware v3.06 is for the NEC-3520a
Weird how it was v1.04 and jumped to v3.04 then v3.06 if I recall !
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
rkhera
Newbie
|
8. January 2006 @ 09:36 |
Link to this message
|
Hello!
I am having the same problem and been trying to diagnose it for over a month! I am trying to burn DVD+R DL and get the cannot perform start of disc at once. Here is my Nero Express 7.0.0.0 log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD+-RW DW-D56A >Version: PDS7 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047932kB)
Free physical memory: 144MB (147712kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2006
===== Disc-Copy over image - 1st step : Copy to image ...
10:41:47 PM #1 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:41:47 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory
10:41:47 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
10:41:47 PM #4 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
10:41:47 PM #5 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 2071295 / 0x1F9AFF / 4045MB
S01 T01 Con 0x14 Start 0 Len 4142587 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:41:47 PM #6 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 4142587 = 4142587, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:41:48 PM #7 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
10:41:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 4142586 (920:34.36, 8090MB)
10:41:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
10:41:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:41:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 4142587 (4142587) = #4142587/920:34.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4142587 blocks [Image Recorder]
--------------------------------------------------------------
10:41:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8484018176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4142587 | lead-out | 1 | 0x41 | 0x00
10:41:48 PM #13 Phase 120 File dlgbrnst.cpp, Line 1724
Creating the image for burning
10:41:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:18:22 PM #15 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 4142587 (3F35FBh), length 0 blocks
11:18:22 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:18:22 PM #17 Phase 121 File dlgbrnst.cpp, Line 1724
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
11:18:26 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:18:26 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:18:26 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8484018176
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=920:34.37 ( 4142587) RecDep=0x00
LBRK: Last LBA on layer 0 = 2071295 / 0x1F9AFF / 4045MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Ripple K\My Documents\TempImage.nrg>
11:18:26 PM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
11:19:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4142586 (920:34.36, 8090MB)
11:19:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
11:19:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
11:19:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
11:19:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 4142587 (4142587) = #4142587/920:34.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4142587 blocks [D: SONY DVD+-RW DW-D56A]
--------------------------------------------------------------
11:19:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8484018176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4142587 | lead-out | 1 | 0x41 | 0x00
11:19:11 PM #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:19:11 PM #12 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
11:19:11 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:20:10 PM #14 SPTI -1114 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x03838c00: Len xc
0x00 0A 00 00 00 00 00 00 00 1F 9B 00
11:20:10 PM #15 Text 0 File DVDPlusDualLayer.cpp, Line 639
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
11:20:10 PM #16 CDR -1114 File ThreadedTransferInterface.cpp, Line 1783
Reset occurred
D: SONY DVD+-RW DW-D56A
11:20:10 PM #17 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
Could not perform start of Disc-at-once
11:20:10 PM #18 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 1:03:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Please help! It seems that I have the latest firmware for this DVD writer drive and also it supports DVD+R DL media.
Thanks a ton!!
|
|
Advertisement
|
|
|
Moderator
|
8. January 2006 @ 10:04 |
Link to this message
|
@rkhera -
Quote:
Nero Version: 7.0.0.0
- 7.0.1.4b is here - http://www.nero.com/nero7/eng/nero7-up.php
Quote:
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7
- firmware's up to date - http://forum.rpc1.org/dl_firmware.php?download_id=1965
Quote:
Physical memory : 1023MB (1047932kB)
Free physical memory: 144MB (147712kB)
Memory in use : 85 %
- sufficient total memory but pretty much no free memory, real bad when you had 1GB to start with... you need to close down more programs prior to ALL dvd work/burning to free up more memory
Quote:
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
- i'm no dual layer expert but i'd say that Nero's not coping with the layer break here.
Quote:
Reset occurred
- see other comments
Maybe try imgburn from www.imgburn.com or dvd decrypter, both programs by Lightning UK are able to burn dual layer properly
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 8. January 2006 @ 10:06
|
|
