|
|
|
Nero Vision Express 3.1.0.7 Transcoding Error
|
|
|
DarkRyno
Newbie
|
19. December 2005 @ 00:34 |
Link to this message
|
|
I have already burned 3 DVDs with the same template and similar content to this one, yet this one will not get past the start of transcoding.
The error in the log file is
[16:20:02] DVDEngine ERROR
[16:20:02] DVDEngine cause: 128 (nmc_processing_exception)
[16:20:02] DVDEngine source: CNeVideoEncoder::GetNextAccessUnit
[16:20:02] DVDEngine description: Gop length = 0
If you need to see the entire log file I can email it to you or upload it somewhere.
I have tryed reinstalling Nero but to no avail. I assume it must be something wrong with the video file/s.
I need these DVDs done for a Christmas Present. Thanks for your help!
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
19. December 2005 @ 01:10 |
Link to this message
|
Try my guide here http://forums.afterdawn.com/thread_view.cfm/272946 - it's really simple. On the other hand, is your firmware up to date? Did you set your location to burn into your burner or hard drive? Did you choose "Add video files" or "capture video files"? It would be nice if you can provide the whole log. Remember to "TAKE OUT/EDIT" your Nero serial before you're going to post back here alright.
This message has been edited since posting. Last time this message was edited on 19. December 2005 @ 01:35
|
|
DarkRyno
Newbie
|
19. December 2005 @ 01:29 |
Link to this message
|
I'm pretty sure it's not my firmware because I burned 2 DVDs yesterday.
I used exactly the same method as in your guide except I burned straight to my burner rather than to my hard drive first. That shouldn't matter anyway as the error is in the transcoding.
And I don't know what you mean by "TAKE OUT/EDIT" my Nero serial. I don't see my serial anywhere how can I remove it O_o.
|
AfterDawn Addict
|
19. December 2005 @ 01:44 |
Link to this message
|
There could be a possibility that the files you're trying to transcode is corrupted. By the way, what are your computer specs (ie processor, ram, space available, etc.)?
I recommend transcoding and writing into the hard drive first, then have Nero Express or Nero Burning Rom burn them files once it's completed. Because you'll never if it's too big to fit onto a single DVD-R or DVD+R disc, by transcoding and writing into the hard drive first, you can always have Nero Recode 2 to encode/compress it to fit perfectly onto a DVD+R or DVD-R disc (if only it's over 4.5GB).
To get the very last section of your Nero Log, go here: C:\Program Files\Ahead\Nero\NeroHistory (for Nero 6) and C:\Program Files\Nero\Nero 7\Core\NeroHistory (for Nero 7) -- now remember to TAKE OUT/EDIT OUT your Nero serial before posting it back here.
Here is an example successful burned log of mine, yours should look identitcal like this on the very last bottom part.
Quote:
============== *** Nero Burning ROM, History File *** ================
David X
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <------(NOTICE I edited my serial)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE
Physical memory : 991MB (1015280kB)
Free physical memory: 547MB (560296kB)
Memory in use : 44 : 0
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2005
UDF/ISO compilation
3:24:29 AM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
3:24:29 AM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
3:24:29 AM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
3:24:29 AM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
3:24:29 AM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
3:24:29 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
3:24:29 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
3:24:29 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:24:30 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:24:30 AM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
3:24:30 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2216687 (492:35.62, 4329MB)
3:24:30 AM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
3:24:30 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
3:24:30 AM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:24:30 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2216688 (2216688) = #2216688/492:35.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216688 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
3:24:30 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4539777024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2216688 | lead-out | 1 | 0x41 | 0x00
3:24:30 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:24:30 AM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
3:24:30 AM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
3:24:30 AM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
3:24:30 AM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
3:24:30 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:24:30 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
3:24:30 AM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
3:24:30 AM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
3:24:30 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
3:38:36 AM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2216688 (21D2F0h), length 0 blocks
3:38:36 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:39:00 AM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
3:39:00 AM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
DarkRyno
Newbie
|
19. December 2005 @ 01:56 |
Link to this message
|
Mine looks like this
Quote:
============== *** Nero Burning ROM, History File *** ================
Ryan
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.13
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 13c
Recorder: <TOSHIBA ODD-DVD SD-R6372>Version: 1030 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-R6372 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA ODD-DVD SD-R6372 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 232MB (238060kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2005
NeroAPI
18:45:12 #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
18:45:13 #2 Text 0 File Reader.cpp, Line 127
Reader running
18:45:13 #3 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA ODD-DVD SD-R6372 running
18:45:13 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
18:45:13 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
18:45:13 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
18:45:13 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1236623 (274:48.23, 2415MB)
18:45:13 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
18:45:13 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TOSHIBA ODD-DVD SD-R6372, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193
18:45:13 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:45:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1236624 (1236624) = #1236624/274:48.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1236624 blocks [TOSHIBA ODD-DVD SD-R6372]
--------------------------------------------------------------
18:45:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TOSHIBA ODD-DVD SD-R6372] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2532605952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1236624 | lead-out | 1 | 0x41 | 0x00
18:45:17 #13 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
18:45:17 #14 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
18:45:17 #15 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
18:45:17 #16 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
18:45:17 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:45:17 #18 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
18:45:17 #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
18:45:17 #20 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
18:45:17 #21 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:57:29 #22 Text 0 File WriterStatus.cpp, Line 116
<TOSHIBA ODD-DVD SD-R6372> start writing Lead-Out at LBA 1236624 (12DE90h), lenght 0 blocks
18:57:29 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:57:30 #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1236623
18:58:24 #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 13/06/2001 18:30:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:14 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1A23-0809-4130-2397-8466-2018
1A40-0009-4030-2419-2086-5287
1A41-0809-9130-2320-8523-0114
1A42-0809-9030-2414-9044-4638
1A43-0009-4130-2448-0833-6121
1A44-0809-9030-2380-2193-2326
1A45-0009-4130-2329-8024-2970
1A46-0009-4130-2457-1880-2079
1A47-0009-9130-2431-8177-3698
1A48-0809-4030-2316-9331-2181
1A49-0609-9130-2375-7715-2223
1A4A-0009-9130-2295-8568-5692
1A4C-0800-0000-1467-4037-2789
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.13
Using interface version: 6.6.0.8
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 0, 13c
Recorder: <TOSHIBA ODD-DVD SD-R6372>Version: 1030 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-R6372 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA ODD-DVD SD-R6372 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 161MB (165524kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.12.2005
NeroAPI
14:56:50 #1 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
14:56:51 #2 Text 0 File Reader.cpp, Line 127
Reader running
14:56:51 #3 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA ODD-DVD SD-R6372 running
14:56:52 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
14:56:52 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
14:56:52 #6 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
14:56:52 #7 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1482047 (329:20.47, 2894MB)
14:56:52 #8 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
14:56:52 #9 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: TOSHIBA ODD-DVD SD-R6372, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
14:56:52 #10 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:56:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1482048 (1482048) = #1482048/329:20.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1482048 blocks [TOSHIBA ODD-DVD SD-R6372]
--------------------------------------------------------------
14:56:52 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TOSHIBA ODD-DVD SD-R6372] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3035234304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1482048 | lead-out | 1 | 0x41 | 0x00
14:56:55 #13 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
14:56:55 #14 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
14:56:55 #15 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
14:56:55 #16 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
14:56:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:56:56 #18 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
14:56:56 #19 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON
14:56:56 #20 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
14:56:56 #21 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:15:25 #22 Text 0 File WriterStatus.cpp, Line 116
<TOSHIBA ODD-DVD SD-R6372> start writing Lead-Out at LBA 1482048 (169D40h), lenght 0 blocks
15:15:25 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:15:25 #24 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1482047
15:16:41 #25 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=5, 0, 0, 1, size=57344 bytes, created 13/06/2001 18:30:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:14 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
19. December 2005 @ 02:24 |
Link to this message
|
@DarkRyno
Both of your Nero logs looks pretty clean, they're both successful burned, except 2 things below. Now back to your "DVDEngine ERROR", like I said, there may be a possibility that the files is corrupted. What files/kind of movie are you trying to convert/transcode?
Quote:
Nero API version: 6.6.0.13
Nero is a few versions behind, maybe you may need to update to the latest Nero 6.6.0.18.
Quote:
Recorder: <TOSHIBA ODD-DVD SD-R6372>Version: 1030
Your burner's firmware is a bit out-of-dated. It's latest firmware is 1032. Go here http://forum.rpc1.org/dl_firmware.php?download_id=1823 to download the latest firmware version and run it to update it. It will help to increase the burning performances and media compatibility.
|
|
Advertisement
|
|
|
|
DarkRyno
Newbie
|
20. December 2005 @ 02:53 |
Link to this message
|
I'm burning just .wmv videos.
My last DVD was about half .wmv and half .AVI and that worked.
The videos play fine and everything, they just won't transcode.
Thanks for that update stuff as well.
|
|
