|
|
|
CD Burner has always been a problem
|
|
|
obst
Newbie
|
19. December 2005 @ 04:19 |
Link to this message
|
|
Purchased the burner in 2003, when the computer was built. It has only been used about 10 times with one or two successes. I recently installed Nero Smart Start, which enables logs of the process to be recorded, which I have done. So far no success burning "data"--several letters. My reading of the logs tells me nothing, but I am not at all well versed in this. Maybe I can share the log? (Liteon CD ROM LTN5260, Lite-on LTR- 52246S.)
|
|
Advertisement
|
 |
|
|
Moderator
|
19. December 2005 @ 08:17 |
Link to this message
|
yup, let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
obst
Newbie
|
20. December 2005 @ 07:07 |
Link to this message
|
I enclose a log, as you suggested some content has been removed. Have a look and tell me what you think, Thanks.
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON CD-ROM LTN526D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITEON CD-ROM LTN526D D: CDRom0
LITE-ON LTR-52246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory :)
Free physical memory:)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.12.2005
CD-ROM (ISO)
9:48:23 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:48:23 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated
9:48:24 #3 Text 0 File Reader.cpp, Line 126
Reader running
9:48:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:48:24 #5 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media
9:48:28 #6 Phase 40 File dlgbrnst.cpp, Line 1855
Aborted by user
9:48:28 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
9:48:28 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON LTR-52246S
Medium not present
9:48:28 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 08-09-2004 0:27:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 08-09-2004 0:27:38 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 08-09-2004 0:29:08 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (), size=95360 bytes, created 04-08-2004 12:00:00 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 23-07-2004 1:33:44
Nero version: 6.3.1.26 (Nero Express)
Recorder: <LITE-ON LTR-52246S> Version: 6S0F - HA 1 TA 1 - 6.3.1.26
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON CD-ROM LTN526D >Version: YSR7 - HA 1 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON CD-ROM LTN526D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITEON CD-ROM LTN526D D: CDRom0
LITE-ON LTR-52246S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : Free physical memory: Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.12.2005
CD-ROM (ISO)
15:42:10 #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
15:42:10 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated
15:42:10 #3 Text 0 File Reader.cpp, Line 126
Reader running
15:42:10 #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running
15:42:10 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
15:42:10 #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media
15:42:11 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 599 ( 0:09.74)
15:42:11 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
15:42:12 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
15:42:12 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:42:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------
15:42:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON LTR-52246S ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
600 | lead-out | 1 | 0x00 | 0x41
15:42:12 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 600 -> 598.
15:42:13 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
15:42:13 #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
15:42:13 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
15:42:13 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 32x (4.800 KB/s)
15:42:14 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:42:14 #19 Text 0 File Mmc.cpp, Line 20698
Set BUFE: supported -> ON , SMART-BURN : ON
15:44:35 #20 Phase 40 File dlgbrnst.cpp, Line 1550
Aborted by user
15:47:32 #21 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x032A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
15:47:32 #22 CDR -1106 File Writer.cpp, Line 304
Power calibration error
15:47:32 #23 CDR -201 File WriterStatus.cpp, Line 196
Invalid write state
LITE-ON LTR-52246S\H1 T1
15:47:32 #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Could not perform EndTrack
15:47:32 #25 Text 0 File Mmc.cpp, Line 15518
<LITE-ON LTR-52246S > start Close Session
15:47:32 #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
15:47:32 #27 Phase 39 File dlgbrnst.cpp, Line 1855
Burn process aborted
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 08-09-2004 0:27:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 08-09-2004 0:27:38 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 08-09-2004 0:29:08 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04-08-2004 12:00:00 (Adapter driver for rec)
====== *** Nero-Burning Rom, History File *** ======
When burns are attempted, they all end up needing to be aborted. The burn always or nearly always goes to 57% and no further. There is no sign of a burn on the CD. Once aborted the computer is blocked from all other activity until (I cannot open new processes or windows) ??the abort is accepted and processed?? (this process of aborting takes several minutes) This includes the Task Manager?ie once I have aborted and the abort is shown on the computer screen Nero Window-I cannot end the Task/process.
|
Moderator
|
20. December 2005 @ 12:07 |
Link to this message
|
Quote:
Nero version: 6.3.1.26 (Nero Express)
- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php
Quote:
Recorder: <LITE-ON LTR-52246S> Version: 6S0F
- burner's firmware is up to date, albeit @Apr 2004
Quote:
Physical memory :)
Free physical memory:)
Memory in use : 81 %
- smilies are all well and good but where's the numbers
Quote:
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
- if other suggestions don't help try better discs
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- see previous comment
Quote:
Power calibration error
- Here's a v good start re Power Calibration errors - http://forums.afterdawn.com/thread_view.cfm/93406
also, quote from "http://www.nero.com/en/FAQs_Error_Messages.html#9 - "
"9. I get a 'Power calibration error' or 'Calibration area (almost) full' error message. Why?
Power Calibration is controlled by the recorder.
Before any write operation, all recorders must do a 15 step power test to determine the optimum power for writing to the CD; this is called "Optimum Power Calibration"(OPC). During the write, it continues to do this test to get the best write throughout the whole CD; this is called "Running Optimum Power Calibration" (ROPC).
This whole process is controlled by the recorder, though initiated by programs such as Nero. There is an area on the inner part of the CD for the test and test data info to be stored. You can use this area up to 999 times.
If you receive the "Power calibration error" or "Power calibration area is (amost) full" error message, the cause will be either poor media, poor power, or a defective recorder.
Please try the following solutions:
Update the firmware of your recorder. Please check the manufacturer's website for the latest version.
Try another brand of CD-R or CD-RW media.
Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal.
Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master.
Send the recorder in for service."
Quote:
Invalid write state
Burn process aborted
- if other suggestions don't help try better discs
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 08-09-2004 0:27:22 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 08-09-2004 0:27:38 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 08-09-2004 0:29:08 (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then install Nero 6.6.0.18 WITHOUT installing InCD.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 20. December 2005 @ 12:07
|
AfterDawn Addict
|
20. December 2005 @ 13:07 |
Link to this message
|
It almost would seem easier and less time consuming to just buy another CD-RW drive. They are dirt cheap. Also an upgrade to DVD-RW is an option. Creaky gave you top-notch info. But at least with a new drive everything would be updated. And buy good media!
|
|
obst
Newbie
|
21. December 2005 @ 09:57 |
Link to this message
|
|
You speak of updating the firmware; Is my mfg. LITEON?
Also this is inside the CPU or internal? You think that it may be sharing power with some other component and should be powered independently. Anyway you can diagram the wires and where to reconnect them, or the grey tape if that is the power medium?
I have tried to record using several brands of CD's.
|
|
Advertisement
|
|
|
Moderator
|
22. December 2005 @ 03:17 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 03:17
|
|
