Burn Failure with Nero 6.3.0.3

Newbie

19. December 2005 @ 11:08

Link to this message

I had previously been able to use DVD shrink and then the system would automatically burn a dvd with Nero with no problem, all in one step. Now I have been failing at any attempt. I even try creating an image first and then try burning it with nero and it still fails.

The only way I have been getting a DVD burned is creating an image in DVD SHRINK and then burning it using Roxio Disc Copier. I know Nero and Roxio don't play nice together, but I had no problems with both software apps on my system before.

I will include two of the error logs below for your review. I see that I have DMA off. I was not able to turn it back on through the control panel/device mgr etc., because I have Intel Application Accelerator 2.3.2.2160 on my PC. I tried removing it through its uninstaller and XP add/remove programs, but the system will not let me. It can't find it. I tried removing the Primary and Secondary controllers, so that windows would reinstall them with DMA on, but it still kept DMA off. I'm using Sony DVD-RW and Sony DVD-R, even though the system is telling me I'm using Ritek with the SONY DVD-RW.

Many times, I have to cancel the burn because I see no increase in percentage of burn completed (1% or 2%). Any advice would be greatly appreciated.

2 files below:
______________________________________________________________________
1 using Sony DVD-RW:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 5:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero API version: 6.3.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 1 - 6.3.0.3
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N IdeChnDr Port 1 ID 1 DMA: Off
: EUSBMSD Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616 E: CDRom0
TDK DVDRW0404N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 147MB (151540kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.12.2005
NeroAPI
9:56:46 AM #1 Phase 112 File APIProgress.cpp, Line 253
DVD-Video files reallocation started

9:56:46 AM #2 Phase 114 File APIProgress.cpp, Line 253
DVD-Video files reallocation completed (no file modified)

9:56:46 AM #3 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted

9:56:46 AM #4 Text 0 File Reader.cpp, Line 118
Reader running

9:56:46 AM #5 Text 0 File Writer.cpp, Line 124
Writer TDK DVDRW0404N running

9:56:46 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:56:46 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

9:56:46 AM #8 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media

9:56:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9:56:47 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

9:56:47 AM #11 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: TDK DVDRW0404N, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214

9:56:47 AM #12 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:56:47 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------

9:56:47 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

9:56:47 AM #15 Phase 24 File APIProgress.cpp, Line 253
Caching of files started

9:56:47 AM #16 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

9:56:47 AM #17 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed

9:56:47 AM #18 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 2x (2,770 KB/s)

9:56:47 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:56:47 AM #20 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

9:56:47 AM #21 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON

9:56:47 AM #22 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

9:56:47 AM #23 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:57:13 AM #24 Text 0 File Cdrdrv.cpp, Line 1277
09:57:13.968 - TDK DVDRW0404N\H1 T1 : Queue again later

10:04:15 AM #25 SCSI -1046 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x017A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x07 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:04:15 AM #26 CDR -1046 File Writer.cpp, Line 301
Illegal disc

10:04:15 AM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:04:15 AM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:04:15 AM #29 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1855

10:04:15 AM #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 2:00:00 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 3/26/2004 11:15:01 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 5:53:46 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
_______________________________________________________________________

2nd file: using SONY DVD-R media:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 5:53:46 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero API version: 6.3.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <TDK DVDRW0404N> Version: 1.0A - HA 1 TA 1 - 6.3.0.3
Adapter driver: <IdeChnDr> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L080J4 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N IdeChnDr Port 1 ID 1 DMA: Off
: EUSBMSD Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616 E: CDRom0
TDK DVDRW0404N F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 227MB (232896kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.12.2005
NeroAPI
6:33:00 PM #1 Phase 112 File APIProgress.cpp, Line 253
DVD-Video files reallocation started

6:33:00 PM #2 Phase 114 File APIProgress.cpp, Line 253
DVD-Video files reallocation completed (no file modified)

6:33:00 PM #3 Phase 111 File APIProgress.cpp, Line 253
DVD-Video files sorted

6:33:00 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

6:33:00 PM #5 Text 0 File Writer.cpp, Line 124
Writer TDK DVDRW0404N running

6:33:00 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

6:33:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

6:33:01 PM #8 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-At-Once, using DVD media

6:33:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 822271 (182:43.46, 1605MB)

6:33:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

6:33:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

6:33:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:33:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 822272 (822272) = #822272/182:43.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 822272 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------

6:33:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1684013056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
822272 | lead-out | 1 | 0x00 | 0x41

6:33:02 PM #15 Phase 24 File APIProgress.cpp, Line 253
Caching of files started

6:33:02 PM #16 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

6:33:02 PM #17 Phase 25 File APIProgress.cpp, Line 253
Caching of files completed

6:33:02 PM #18 Phase 36 File APIProgress.cpp, Line 253
Burn process started at 4x (5,540 KB/s)

6:33:02 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:33:02 PM #20 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

6:33:02 PM #21 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON

6:33:02 PM #22 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

6:33:02 PM #23 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:33:22 PM #24 Text 0 File Cdrdrv.cpp, Line 1277
18:33:22.734 - TDK DVDRW0404N\H1 T1 : Queue again later

6:36:54 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00E50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x0E 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

6:36:54 PM #26 CDR -1046 File Writer.cpp, Line 301
Illegal disc

6:36:54 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:36:54 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:36:54 PM #29 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 3807

6:36:55 PM #30 Phase 38 File APIProgress.cpp, Line 253
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 2:00:00 PM
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 3/26/2004 11:15:01 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 5:53:46 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Moderator

22. December 2005 @ 00:56

Link to this message

thread teleported to Nero forum, will have a look at logfile when i get chance

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

9mmruger1

AfterDawn Addict

22. December 2005 @ 06:29

Link to this message

Your Nero is way out of date: Upgrade here: http://ww2.nero.com/nero6/enu/nero-up.php

Quote:
Physical memory : 511MB (523568kB)
Free physical memory: 147MB (151540kB)
Memory in use : 71 %

You need to free up some system resources as you only have 147mb of Ram available. No multi tasking during the process. Turn off your antivirus, spyware and popup blockers.

Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

Reduce your target size so that you do not burn too close to the edge of the media. 4300 should do it.

Start with these changes. creaky will be back and look it over closely.

For great guides:
http://home.comcast.net/~bbmayo/index.html

This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 09:29

Moderator

22. December 2005 @ 06:51

Link to this message

@9mmruger1 found me :)

i've picked the 2nd log file

Quote:
Nero API version: 6.3.0.3

- Nero's too old, latest 6.x version is 6.6.0.18, download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php

Quote:
Recorder: <TDK DVDRW0404N> Version: 1.0A

- firmware is one version behind, 1.0C is here - http://forum.rpc1.org/dl_firmware.php?download_id=1596

Quote:
DiskPeripheral : MAXTOR 6L080J4 IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616 IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N IdeChnDr Port 1 ID 1 DMA: Off

- DMA needs to be ON, and you have those annoying 'IdeChnDr' drivers (Intel Application Accelerator or something); if i recall correctly you can only get DMA back ON by getting rid of those drivers. try this - http://home.comcast.net/~bbmayo/FAQ.htm and install the standard Microsoft drivers when prompted

Quote:
Illegal disc

- see previous comment

Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.110 , size=24698 bytes, created 3/26/2004 11:15:01 PM

- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities

This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 06:51

Newbie

28. December 2005 @ 06:43

Link to this message

Thanks for the info 9mmruger1 and Creaky. I have updated the firmware for the DVD Drive to 1C. I'm looking into upgrading to Nero 7 Ultra, but I want to see that I can burn first with the older software. I do wish to remove the Intel Accelerator, but I can't locate the link from the page that you are directing me to: http://home.comcast.net/~bbmayo/FAQ.htm

Last night, I went into my PC's BIOS setup and changed the info for the DVD burner to Mode 5 but I haven't had a chance to test it yet.

Any advice would be greatly appreciated.

Moderator

28. December 2005 @ 07:31

Link to this message

see here for how to remove the Intel Application Accelerator 'IdeChnDr' drivers - http://forums.afterdawn.com/thread_view.cfm/2/231433 - kurtp21's replies are what you need

Newbie

9. January 2006 @ 12:57

Link to this message

Hi Creaky: I looked at all the responses from the thread link you gave me and I can't find how to remove the intel accelerator from Kurtp21's replies. He talks about VIA busmaster, and I don't have those controllers. I tried removing the IDE controller and windows reinstalls them, but I still can't find some way to turn DMA on for my TDK Drive. Any ideas?

Moderator

10. March 2006 @ 02:07

Link to this message

hi, i'm slowly catching up on 3months of replies i hadn't yet read, did you get a resolution to DMA on that TDK drive yet ?

Newbie

10. March 2006 @ 04:45

Link to this message

No, I still can't uninstall the Intel Accelerator program, but thanks for asking.

I did purchase Nero 7.0 but have not yet installed it yet. I hoping that will help, but I'm not too optimistic, since it will still be the same hardware setup on my pc.