|
|
|
Burning Audio CD with Nero 7
|
|
Member
|
21. December 2005 @ 07:58 |
Link to this message
|
|
Hi i have(actually you could say now "had") Nero 7. I had two versions of it, the Premium and Ultra, and they both would record Audio Cd's, but heres where the problem lies. All my Audio Cd's that i burned with Nero 7 would skip a couple seconds of Audio after like the first 5-7 minutes or so, and it would repeat after 5-7 minutes til the end of the disc. I had even updated Nero 7 to 7.12 and that didnt even fix it. Is there a fix for this s___, and has anyone notified Nero about this. By the way i just thought it was my DVD-RW drive so I tried it on my DVD/CDRW combo drive, same results. So i went to install a different release of Nero 7 on my friends PC, the same thing. Anyone got a clue why this is happening?
|
|
Advertisement
|
|
|
|
Member
|
21. December 2005 @ 12:35 |
Link to this message
|
|
Is anyone reading this? Hello?
|
AfterDawn Addict
|
21. December 2005 @ 13:59 |
Link to this message
|
What kind of CD-R or CD-RW media did you used to burn? What speed did you burned them? Make sure you burner's firmware is up-to-date with the most current available. In addtion, don't multi-task when burning.
I highly recommend Taiyo Yuden, Verbatim or Maxell CD-R media (same thing apply to DVD media). Don't burn them at any higher than 16X. Even I burned all of my music audio at 8X and sometimes at 16X.
Let's have the "very last section" of your Nero 7 logs. To get your last section log, go here: C:\Program Files\Nero\Nero 7\Core\NeroHistory -- now REMEMBER to EDIT out your Nero serial before you're going to post back here.
Below is an example from a successfully burned log of mine, yours should look identical to this.
Quote:
======== *** Nero Burning ROM, History File *** ========
David X
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <----(NOTICE: I EDIT out my Nero serial)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 524MB (537208kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2005
UDF/ISO compilation
6:20:25 AM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
6:20:26 AM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
6:20:26 AM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:20:26 AM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
6:20:26 AM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
6:20:26 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:20:26 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
6:20:26 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:20:26 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:20:26 AM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
6:20:26 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2253359 (500:44.59, 4401MB)
6:20:26 AM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
6:20:26 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
6:20:26 AM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:20:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2253360 (2253360) = #2253360/500:44.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253360 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
6:20:26 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614881280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2253360 | lead-out | 1 | 0x41 | 0x00
6:20:26 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:20:26 AM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
6:20:26 AM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
6:20:26 AM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
6:20:26 AM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
6:20:26 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:20:26 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
6:20:26 AM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
6:20:26 AM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
6:20:26 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:34:41 AM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2253360 (226230h), length 0 blocks
6:34:41 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:35:05 AM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
6:35:05 AM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Member
|
21. December 2005 @ 17:41 |
Link to this message
|
I use Memorex CD-R's and if u want me to give u a Nero 7 log ill have to install Nero 7 since now im using Nero 6.6, i know Nero 6 is old, but with the 6.6 update its the best. Yes i do multitask, but i only have BitComet and a VirusScan running in the background with enough avaialble disk space and RAM. Im running a 2.2 GHz AMD 64 3500+ processor on a ASUS A8N SLI Deluxe mobo and 1 GB of RAM. Also i have a 160 GB Hard Disk partitioned into two 80's. BTW i have used these CD-R's(the same Memorex cd's) with Nero 6.6 and they were recorded perfectly. I have even used Windows Media Player and successfully burned an Audio-Cd with it with no seconds skipped, so ill say its not the media nor my drives. Also ive always burned all my Audio Cd's at 32X and they come out perfect, so ill have to say the software is faulty and someone should report it to the company. The Memorex media i use are 52X media CD-R recordable. All of this comes from my experience of burning and recording my CD's. This is the first time this has ever happened to me, and until Ahead/Nero doesnt find i fix for it, I dont think ill be using version 7, although Nero 7 uses a very cool GUI that i like along with a very nice Nero Express interface. I know, ive said too much already, so tell me what u think.
|
AfterDawn Addict
|
21. December 2005 @ 20:43 |
Link to this message
|
If 6.6.0.18 works perfectly, then more power to you. The reason I'm asking for your Nero 7 log is because your thread started out as "Burning Audio CD with Nero 7" that's all.
I would still recommend slower down on the burning speed though, even if it's a CD-R, at least try to slow down to 24X if you think 16X is too slow for you. I burned all my music cds/audio cds at 16X and I've never had any issues at all.
Good luck and happy burning!!!
|
Member
|
22. December 2005 @ 08:15 |
Link to this message
|
Ill probably install Nero 7 again with a 7.0.14 and see if this corrects the issue im having and ill give u the Nero 7 log
|
|
Johnytuon
Junior Member
|
22. December 2005 @ 13:42 |
Link to this message
|
mp3pro.dll file needs replacing with an older version...also dont forget to tick in options to get rid of the 2 sec gap or itll put it in regardless of the explorer window saying otherwise.Btw the cue files also arent compatible ie any done with Nero 7 wont load into Nero 6.Hope this helps
Johny
|
|
Advertisement
|
|
|
|
knsfromdk
Newbie
|
22. December 2005 @ 14:29 |
Link to this message
|
Yeps It's the mp3pro.dll that's the problem.... Incrideble that Ahead is letting this problem slip through several updates!?? Not OK, Nero used to be the best to burn CD's... I guess they wanna talk and swallow at the same time!! ;o)
The mp3pro.dll file is located here on your harddrive:
c:\program files\common files\ahead\audioplugins
And here is a link to a working mp3pro.dll file:
Here 2.0.4.7 ---http://rapidshare.de/files/7528898/mp3PRO.dll.html-----
Enjoy!
Kasper
|
|
