|
|
|
Feelin' stupid... DVD shrink 3.2 to Nero Burning Rom, Help!
|
|
|
abuhhhh
Suspended due to non-functional email address
|
21. December 2005 @ 14:41 |
Link to this message
|
|
I was using DVD shrink 3.2 to make a DVD-9 copy, and I got this error:
Burn Error
Burn process failed at 2.4x (3,324 KB/s)
xxxx-xxxx-xxxx-xxxx-xxxx-xxxx*
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 09/10/99 06:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 07/22/04 16:33:44
Nero API version: 6.3.1.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-710A> Version: BYZ1 - HA 2 TA 0 - 6.3.1.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-148C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-148C D: CDRom0
SONY DVD RW DRU-710A E: CDRom8
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523280kB)
Free physical memory: 108MB (111208kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2005
NeroAPI
13:46:25 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
13:46:25 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
13:46:25 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
13:46:25 #4 Text 0 File Reader.cpp, Line 118
Reader running
13:46:25 #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
13:46:25 #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running
13:46:25 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
13:46:25 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
13:46:25 #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
14:25:04 #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4155871 (923:31.46, 8116MB)
14:25:04 #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
14:25:04 #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
14:25:04 #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
14:25:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 4155872 (4155872) = #4155872/923:31.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4155872 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------
14:25:04 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8511225856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4155872 | lead-out | 1 | 0x00 | 0x41
14:25:04 #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
14:25:04 #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
14:25:04 #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
14:25:04 #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2.4x (3,324 KB/s)
14:25:05 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:25:40 #21 Text 0 File DVDPlusDualLayer.cpp, Line 451
L0 Data Zone Capacity set to 2078000 (1FB530h, 4058MB) -> OK, confirmed setting
14:25:40 #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 467
Burning Layer 1
14:25:40 #23 Text 0 File DVDPlusDualLayer.cpp, Line 475
Start writing layer 1 at address 0 (0h)
14:25:40 #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22B52F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
14:25:40 #25 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: DVD-ROM
Changing the book type was finished with error code: 0
14:25:40 #26 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
14:47:30 #27 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03608000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
14:47:30 #28 SCSI -1064 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0FD80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x08 0x80 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
14:47:30 #29 CDR -1135 File Writer.cpp, Line 304
Write error
SONY DVD RW DRU-710A\H2 T0
14:47:30 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:47:31 #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:47:31 #32 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2.4x (3,324 KB/s)
14:47:31 #33 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
14:47:31 #34 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 02/04/05 12:47:33
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 02/04/05 12:47:33
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 09/10/99 06:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 03/11/05 17:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help would be greatly appreciated! Thanks!
This message has been edited since posting. Last time this message was edited on 21. December 2005 @ 15:03
|
|
Advertisement
|
|
|
|
Senior Member
|
21. December 2005 @ 14:53 |
Link to this message
|
abuhhhh
You need to edit out your serial numbers in this post. Go to the pencil symbol, and put xxx or something over your numbers. They start with 1A22
Your version of Nero is behind. 6.6.0.18 is the latest 6x version.
Here is the link to the Nero update:
http://ww2.nero.com/nero6/enu/nero-up.php
Don't get the INCD package, you wont need it.
This one shows firmware to be up to BYX5
http://forum.rpc1.org/dl_firmware.php?download_id=1917Quote:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 02/04/05 12:47:33
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 02/04/05 12:47:33
you have Roxio on your system, and this conflicts with nero. It needs to be removed with the roxio zapper, but i dont have a link to that right now. Update your firmware, remove roxio, update nero, and try again. Sorry i didn't have much time to look thru the log. Maybe others will post what i missed. Gotta get to work.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 21. December 2005 @ 19:40
|
Senior Member
|
21. December 2005 @ 19:39 |
Link to this message
|
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 21. December 2005 @ 19:45
|
|
abuhhhh
Suspended due to non-functional email address
|
21. December 2005 @ 20:49 |
Link to this message
|
|
It is an external drive. Thanks for all the help! Let me download/install these various things and I'll post my result. Thanks!
|
|
zimer
Junior Member
|
27. December 2005 @ 16:57 |
Link to this message
|
What if the Nero ASPI is listed as fine but System ASPI shows as "corrupt"?? Must I be concerned ??
I have had problems using NeroVision Express3 where by after transcoding to finale burn, it does not recognize my blank DVDR. Used Sony,Maxwell,Fuji but NeroVision Express3 fails. Opened from sealed package.
My LG GSA4040B has most recent firmware, XP Pro., SP2, AMD2800,1G memory.
I have used NeroVision Express 3 before and didn't seem to be a problem then.
Azim
|
Senior Member
|
28. December 2005 @ 04:31 |
Link to this message
|
Die CMC Mag!!!
|
|
zimer
Junior Member
|
29. December 2005 @ 18:21 |
Link to this message
|
Thanks. I did download ForceASPI, used Nero's InfoTool and both Nero's and System ASPI indicates "working okay". Though I didn't try to burn any DVD's tonite,
Though how does System "ASPI" get corrupted???? I do use NeroVision Exp. to burn mpeg files, Nero digital for Ipod and sometimes I use AnyDVD first and then Nero Recode.
Anyways, thanks for the info and I will try to burn using NeroVision Exp. v3 for some mpeg files I have.
Zimer.
|
Senior Member
|
2. January 2006 @ 03:47 |
Link to this message
|
|
Zimmer
Im not sure how ASPI gets corrupted, but i have seen it say system aspi corrupted on my friends computer, and the install of ASPI fixed his problem. He has kids so maybe they did something?? Anyways, a good working system aspi is very important to burning. If its working fine, you never even know it is there. Have it get corrupted, or missing, and it will let you know how important it is.
Try burning again, and post back if you have problems.
Die CMC Mag!!!
|
|
zimer
Junior Member
|
3. January 2006 @ 21:29 |
Link to this message
|
I did use NeroVision Express and was able to burn mpeg file so I am able to using home set DVD player. This after I downloaded ForceASPI drivers. My system ASPI reads "installed and working properly" after running Nero's InfoTool.
I will though run InfoTool more frequently and or when I encounter encoding problems.
Thanks again.
Zimer
|
Senior Member
|
4. January 2006 @ 06:28 |
Link to this message
|
|
zimer
Glad to see you are burning away again. Sometimes ASPI installs easily, and other times you have to force it. Newer versions of windows are not even supposed to need it, the application does all the aspi work.
Die CMC Mag!!!
|
|
jman07
Newbie
|
27. January 2006 @ 05:44 |
Link to this message
|
|
Hey how u doing guys i seem to have the same prob as the guy who 1st asked this question...i upgraded my nero but still dosnt work..any suggetions on firmware or anything...This is what it tells me
1AXXX XXXX XXXX <-- edit by herbsman: leave your serial number out next time , thnx ;-)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.98 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON DVD SOHD-167T F: CDRom1
SCSIVAX DVD/CD-ROM K: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1013MB (1038100kB)
Free physical memory: 549MB (562224kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.1.2006
NeroAPI
2:33:18 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:33:18 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:33:18 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:33:18 AM #4 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:33:18 AM #5 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:33:18 AM #6 Text 0 File Reader.cpp, Line 127
Reader running
2:33:18 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:33:18 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:33:18 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:33:18 AM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:33:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2763263 (614:03.38, 5396MB)
2:33:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:33:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R9 Double Layer
2:33:51 AM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
2:33:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2763264 (2763264) = #2763264/614:3.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2763264 blocks [_NEC DVD_RW ND-3500AG]
--------------------------------------------------------------
2:33:51 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5659164672, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2763264 | lead-out | 1 | 0x41 | 0x00
2:33:51 AM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:33:51 AM #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:33:51 AM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:33:51 AM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
2:33:51 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:33:53 AM #22 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x12204E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
2:33:53 AM #23 Text 0 File DVDPlusDualLayer.cpp, Line 639
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
2:33:53 AM #24 CDR -1093 File ThreadedTransferInterface.cpp, Line 1778
No seek complete
2:33:53 AM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
2:33:53 AM #26 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
2:33:53 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:33:53 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
2:33:55 AM #29 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
2:33:55 AM #30 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 20. February 2006 @ 18:23
|
AfterDawn Addict
|
27. January 2006 @ 05:52 |
Link to this message
|
Try not using Shrink and Nero to do a dual layer backup. If you do not already have it dl DVD Decrypter and rip in ISO read mode open your MDS file and then use ISO write mode. You do not need Shrink for a dual layer backup, and it is not advisable to use it for this type of backup.
|
Senior Member
|
27. January 2006 @ 11:12 |
Link to this message
|
jman07,
Quote:
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
DMA is OFF for that drive and needs to be ON.
How to fix it? http://forums.afterdawn.com/thread_view.cfm/260038
You should also go back and edit out your serial number from the log. It starts with IA20- . Just click on the pencil symbol next to your post, and it will open up the edit screen.
Quote:
2:33:53 AM #24 CDR -1093 File ThreadedTransferInterface.cpp, Line 1778
No seek complete
and before that we had a Medium Error.
I only use Verbatim DVD9 s and they have never failed.
Here is what Nero says about that error:
Quote:
18. Why do I get a 'No seek complete' error message?
This error can be caused by the following:
Old firmware on the recorder - Please contact the manufacturer of the recorder in order to get the latest firmware for your recorder. An old firmware can cause compatibility problems as well as burn failures. Firmware upgrades for your recorder are provided only by the manufacturer of your recorder. All firmware upgrades and support for upgrading your recorder?s firmware must be provided by either the recorder manufacturer or the OEM you purchased your recorder bundle from. We can not assist you in this, sorry.
For example if you have a Yamaha Recorder, you would go to the www.yamaha.com website in order to obtain the latest firmware for your recorder and instructions on how to upgrade your recorder?s firmware. Same goes for all other recorder manufacturers, such as Sony, Pioneer, LG, etc...
To determine what kind of recorder you have, assuming you do not know for sure, you can use our Nero Info Tool to obtain this information. To locate the Nero Info Tool, follow the steps below.
For Nero Burning ROM 6 or Nero Express 6 go to:
'Start -> All Programs -> Nero -> Nero Toolkit -> Nero InfoTool'
For Nero Burning Rom 5.5 or Nero Express 5.5 go to:
'Start -> All Programs -> Ahead Nero -> Nero Toolkit -> Nero InfoTool'
Once Nero Info Tool is launched, make sure your recorder is selected in the top left of the window. Use the drop-down box located there to select your recorder or any recorder. Once selected, it displays the manufacturer as well as the model of the recorder you have. Be sure to make a note of this. Also, once you have your recorder selected, you can click on the 'DRIVE' tab and in the top right of this window you will see the current firmware version (among other information) you have on your recorder. Compare this version with the latest firmware provided by the manufacturer of your recorder and upgrade if available.
Legal disclaimer:
"Nero AG is not liable for firmware updates as these updates are not offered by Nero AG. All updates are performed at one?s own risk. Nero AG will not be liable for the legality of the firmware."
Poor media - Try more than one brand of media. For example: TDK, Verbatim, Imation, Yamaha, HP, etc.
Poor IDE cable or incorrect cable - For higher end recorders these days if you use the 40pin cable you can have all sorts of unusual symptoms. It would be best to use an ATA-133 80 wire cable.
Driver conflicts - If you have or had another CD recording software installed on your system, its drivers could be conflicting with our software. This is rare for this symptom, but it does occur. Uninstall any other recording software and make sure all its drivers have been removed with it. Then reinstall Nero and make sure to use the latest version we have posted on our website.
Defective recorder - The optical head on your recorder may need cleaning or servicing. Or it's possible the circuit board on your recorder has an open coil or blown diode or resistor. Any of these could cause the error. Only solution would be to send the drive in for service to the recorder manufacturer.
So try some GOOD media first. Your firmware looked beyond up 2 date as i could only see version 2.88 listed for your drive, and it show it has 2.98 loaded. ???
As arniebear stated, you dont need to go thru a shrinking program as you are putting everything on a DVD9 with no compression. I have used Shrink with a DVD9, just to see how it would do, and it worked fine. You have to change the target size to DVD9, but other than that, it worked. The ISO read/ MDS write method is the best, as it preserves the original layer break, and should give you an exact copy of the original. It is also the fastest way to copy a DVD9.
Die CMC Mag!!!
|
|
jman07
Newbie
|
27. January 2006 @ 15:08 |
Link to this message
|
|
i did everything u said but i still get the same error and i DMA is still turned off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
|
Senior Member
|
28. January 2006 @ 00:46 |
Link to this message
|
|
In alkohol's guide i linked to it said if you are still having DMA off after doing the controllers, to un-install the burners. Did you try that also? After each un-install, a reboot is needed also. This reboot causes windows to load the driver back up again when it sees a drive without a driver.
I remember reading a thread where this guy couldn't get DMA to come on, and tried everything. Finally he had to take the battery out of the motherboard and put it back in. I guess he did it to cause the system to loose memory of a DMA off?? Anyway, it worked for him by doing that, when nothing else would. I will check around to see if there is anything else that can be done. I think there is a program that forces DMA on, but i can't remember what that program is. Usually un-install of drivers and reboot fixes DMA off issues.
Die CMC Mag!!!
|
|
jman07
Newbie
|
28. January 2006 @ 15:42 |
Link to this message
|
aight i got it i just changed my media to Verbatim...but theirs still a prob...what dvd player plays DVD+R DL?hehe
|
Senior Member
|
28. January 2006 @ 17:10 |
Link to this message
|
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 28. January 2006 @ 17:17
|
|
jman07
Newbie
|
2. February 2006 @ 04:08 |
Link to this message
|
hey thanks for all the help b4...ive burned a couple dvd's onto DVD+R DL but then i came across pirates of the carribean..the actual movie wont play and my dvd player will just stop..do u know what i can do to fix this.
|
|
jman07
Newbie
|
2. February 2006 @ 04:19 |
Link to this message
|
|
yo thanks alot everything u said worked...but now i got another prob..ive been burning fine until i came across pirates of the caribbean...i could burn it but the actual movie itself wont play on any dvd player
|
|
Red34
Newbie
|
11. February 2006 @ 17:01 |
Link to this message
|
Hi,i would greatly apreciate if u can help me on my problem MaxBurn,this is what i get when trying to burn from dvd drive straight to another dvd drive.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 1, 4d
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22GUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4083B atapi Port 3 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S480/AH atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4083B E: CDRom0
ASUS CD-S480/AH F: CDRom1
_NEC DVD_RW ND-3550A L: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 1061MB (1086704kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.2.2006
NeroAPI
5:58:16 PM #1 Phase 112 File APIProgress.cpp, Line 275
DVD-Video files reallocation started
5:58:16 PM #2 Phase 114 File APIProgress.cpp, Line 275
DVD-Video files reallocation completed (no file modified)
5:58:16 PM #3 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
5:58:16 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
5:58:16 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:58:16 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 6:54:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thank you.
|
Senior Member
|
11. February 2006 @ 21:03 |
Link to this message
|
@jman07
When i saw your first post i thought you couldn't get an original movie to copy. Then i saw the next post worded slightly differently and that one cleared things up a bit.
The best way to get the most compatibility with stand alones is to use DVD+R media and booktype it to DVD-ROM. Even DVD+R DL can be booktyped, but not DVD-R media. With that said, sometimes you have to try different formats and brands of media to find what YOUR stand alones like. I have a panasonic dvd recorder and it is supposed to like DVD-R the best. Yet, i sometimes get illegal disc error, or un-supported format error when trying a DVD-R. When that happens, i take the -R and put it in my PC and burn that movie to a DVD+R booktyped to DVD-ROM and it works everytime.
Now, sometimes you can run in to a bad pressing of an original DVD, but that kind of error usually gives you CRC errors that dont go away with cleaning the disc. The only cure for a bad pressing is to exchange the bad disc for a new one, and that usually fixes it. Twist of fate might give you 2 bad presses in a row, but not very likely. Nero CD-DVD speed will tell you if your backups are booktyped to DVD-ROM. Just check it out under the Disc info tab.
Here is what Sony +R booktyped to DVD-ROM looks like:
The disc is finalized in this example. Making your disc "multi-session" will leave the disc open for more data writes, and until disc is finalized, it will not read in stand alones either.
Die CMC Mag!!!
|
Senior Member
|
11. February 2006 @ 21:32 |
Link to this message
|
@Red34
Is that the whole log there, or did you edit something out of the middle? It doesnt look like a complete log, and it cut off right when it was going to tell me something.
Quote:
5:58:16 PM #4 NEROAPI 7 File Burncd.cpp, Line 3095
Error:\nCannot connect TRF.
usually we see a bunch of stuff before the error is reported, and sometimes that stuff can divulge the real problem.
I could hazzard a guess as to what TRF is, but id only be guessing.
From what parts of the log i can see, is one or both of those drives external? If both are internal, then you need to check your system aspi files. If one or both of them are external, you could still check, but it might not be a problem. Nero info tool will let you know if System ASPI is bad.
Also whenever i try to do a disc to disc burn and get a failed burn, i extract the movie to HD using DVD Decrypter, and burn from HD to disc, and that seems to have a better chance of success. And it should be a DVD5 to DVD5 or DVD9 to DVD9 for straight copy, but no mixing up disc capacities, like trying to copy a DVD9 to DVD5 without shrinking will give you a failed burn..
Die CMC Mag!!!
|
AfterDawn Addict
1 product review
|
11. February 2006 @ 22:00 |
Link to this message
|
|
|
|
Red34
Newbie
|
11. February 2006 @ 22:01 |
Link to this message
|
|
Thanks for responding, i only deleted the serial # as i noticed u sugested another person to do so,im gonna run it again and post the error message making sure its all there, maybe i did delete something accidently, again thx.
|
|
Advertisement
|
|
|
|
Red34
Newbie
|
11. February 2006 @ 22:15 |
Link to this message
|
Oh, and yes 1 is external the other internal,Nero info. shows aspi drivers are installed and working, v4.60(1021).I dont have a problem burning from the HD, but thats the reason i bought the external dvd so i can just burn straight to other dvd drive.
|
|
