|
i am getting a error ervert time i try to burn an iso with nero
here is my log.
can u email me with a solution please
jaybano@hotmail.com
5c82001080000000005666827687
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <SONY DVD RW DRU-700A> Version: VY03 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-700A >Version: VY03 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-700A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST360021A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-700A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 578MB (592840kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2005
Burn DVD Image
10:56:23 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
10:56:23 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
10:56:23 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-700A running
10:56:23 PM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
10:56:24 PM #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2001637 (444:48.37, 3909MB)
10:56:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
10:56:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193
10:56:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:56:24 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2001638 (2001638) = #2001638/444:48.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2001638 blocks [D: SONY DVD RW DRU-700A]
--------------------------------------------------------------
10:56:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4099354624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2001638 | lead-out | 1 | 0x41 | 0x00
10:56:24 PM #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:56:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
10:56:24 PM #13 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
10:56:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
10:56:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)
10:56:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:56:24 PM #17 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession
10:56:24 PM #18 Text 0 File MMC.cpp, Line 21541
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
10:56:24 PM #19 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
10:56:24 PM #20 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:57:42 PM #21 SPTI -1106 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x09ed0000: Len x10000
0x0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D
0x0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D
0x0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D 0D
10:57:42 PM #22 CDR -1106 File Writer.cpp, Line 302
Power calibration error
D: SONY DVD RW DRU-700A
10:57:42 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:57:42 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:57:42 PM #25 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
10:57:42 PM #26 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out
10:57:42 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04
10:57:42 PM #28 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
D: SONY DVD RW DRU-700A
10:57:42 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:57:42 PM #30 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Quote:
can u email me with a solution please
jayjjjjjjj.com
5XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
First, no email is allow to post here. Second, you need to EDIT out your serial, bofore any hackers hacked your Nero serial and use it for free.
Quote:
Nero Version: 7.0.0.0
7.0.0.0 has a lot of bugs, you need to update to the lates 7.0.1.4 - its latest 7.0.1.4 seems to be free of bugs and works better.
Quote:
Recorder: <SONY DVD RW DRU-700A> Version: VY03
Go here http://forum.rpc1.org/dl_firmware.php?download_id=1817 and get VY08 to update on your burner's firmware, it's way behind.
Quote:
Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
I've been burning for more than 6 years and I've never seen or heard this kind of media before. What kind of media is it? I highly recommend you to get Taiyo Yuden, Verbatim "advanced azo" or "datalifeplus" and Maxell (Hitachi Corp. - made in japan). These are top notch media.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x09ed0000: Len x10000
Bad media, your burner doesn't like it, probably due to cheap dye and or cheap media. Try other high quality media as mentioned above.
Quote:
Power calibration error
D: SONY DVD RW DRU-700A
See above reply, same thing. You need to change to a better media.
Quote:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00
Again, bad media. Your burner can not read/recognize the media, therefore, it was rejected. See above reply for better media. Remember to update your firmware as well.
Quote:
Session fixation error
D: SONY DVD RW DRU-700A
10:57:42 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
Same thing, you've got errors due to bad media that's why it can not perform end of disc.. See previous reply.
Quote:
Existing drivers:
You're missing some drivers here, you should have at least 2 drives here. Search here or search the net for ASPI32 or Prassi/veritas drivers.
Here is an example "Existing drivers" from mine:
Quote:
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created/ 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 03:09
|
