|
I found this forum today and since i've been using mainly DVD Shrink for awhile I read about using AnyDVD and Nero Recode 2 so since I paid the money for Nero 6, I would get a little more use out of it. I was hoping to save a little more time since DVD Shrink takes so long, but Nero Recode took just as long 2 hrs and 20 minutes (I did the backup solely through Recode). But while searching through the forums I read some things and changed my burner to DMA from PIO (or whatever its called) and added an APSI layer to my system (figured it couldn't hurt)). So here the problem. I was going to try on the fly burning (i know its not great but I was just playing around) and when i load the movie into my secondary drive which is a DVD/CD-ROM, My Nero Recode freezes. I can't kill the program through task manager. I have to reboot. There are no error logs cause it just freezes. Is the setup wrong to do this in the first place? Do both devices have to burners? I have no trouble backing up dvd so far when using my burner and saving to hard drive and then writing to disk? Any information would be helpful and if there is any information I could give ya'll to help me just let me know. Thanks.
First off log file wasn't where creaky indicated, it was located here: C:\Program Files\Ahead\NeroVision\NeroFiles so I hope this is the right one
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <HP DVD Writer 640b> Version: E152 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : HP DVD Writer 640b atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6B250S0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : FgF-techCDDVD+tech-200x 0800 FGDSCSI Port 3 ID 0 DMA: Off
CdRomPeripheral : FgF-techCDDVD+tech-200x 0800 FGDSCSI Port 3 ID 1 DMA: Off
CdRomPeripheral : FgF-techCDDVD+tech-200x 0800 FGDSCSI Port 3 ID 2 DMA: Off
=== CDRom-Device-Map ===
HP DVD Writer 640b E: CDRom0
ASUS DVD-E616P3H F: CDRom1
FgF-tech CDDVD+tech-200x Z: CDRom2
FgF-tech CDDVD+tech-200x X: CDRom3
FgF-tech CDDVD+tech-200x Y: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047852kB)
Free physical memory: 447MB (457928kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.12.2005
NeroAPI
10:59:01 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:59:01 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:59:01 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:59:01 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:59:01 PM #5 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 640b running
10:59:01 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:59:01 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:59:01 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:59:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283471 (507:26.21, 4459MB)
10:59:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:59:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 640b, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:59:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:59:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283472 (2283472) = #2283472/507:26.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283472 blocks [HP DVD Writer 640b]
--------------------------------------------------------------
10:59:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 640b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676550656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283472 | lead-out | 1 | 0x41 | 0x00
10:59:01 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:59:01 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:59:01 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:59:01 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
10:59:02 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:59:02 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:59:02 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:37:42 PM #22 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 640b > start writing Lead-Out at LBA 2283472 (22D7D0h), lenght 0 blocks
11:37:42 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:38:17 PM #24 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/12/2005 6:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Since I made this disc, I have corrected the DMA, it is now on. Got rid of InCD with the cleaner from Nero, and added an ASPI Layer to the system.
This message has been edited since posting. Last time this message was edited on 26. December 2005 @ 09:32
|
sorry, didn't know where Recode's log is as i don't use it myself
Quote:
Recorder: <HP DVD Writer 640b> Version: E152
- i'm not sure if that's the latest firmware revision, however the firmware is recognising the discs fine, see here - Quote:
Recorder: HP DVD Writer 640b, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
Quote:
CdRomPeripheral : HP DVD Writer 640b atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6B250S0 atapi Port 1 ID 0 DMA: On
- DMA's now sorted as i just saw your reply on the other thread
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283471 (507:26.21, 4459MB)
- 4459MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 26. December 2005 @ 10:04
|
