using nero express to back up DVDs

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Tuesday 26.11.2024 / 04:32

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > using nero express to back up dvds

Browse by topic

Forums

Start a new thread

using nero express to back up DVDs

Jump to:

Posted

Message

photokid

Newbie

26. December 2005 @ 12:21

Link to this message

I'm new to this and have looked all over the site on how I can back up using nero express along with AnyDVD and DVD shrink and haven't had any luck. I have DVD shrink, nero express and AnyDVD working in the background. I tried burning a back-up with nero using DVDshrink (I hadn't yet downloaded AnyDVD yet) and when it was almost finished it failed (see log below). I may have been burning too fast (16x), but nero was automatically launched, so I didn't have control over that. So I'm not sure what I'm doing wrong.

1a20-serial number edited out

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM
Nero API version: 6.6.0.5
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 1 - 6.6.0.5
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-75CAA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3100011A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 D: CDRom0
_NEC DVD_RW ND-3550A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 640MB (656160kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

26.12.2005
NeroAPI
2:09:28 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

2:09:29 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

2:09:29 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

2:09:29 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

2:09:29 PM #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3550A running

2:09:29 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

2:09:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:09:29 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:09:30 PM #9 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-At-Once, using DVD media

2:09:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286057 (508:00.57, 4464MB)

2:09:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO

2:09:30 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R

2:09:30 PM #13 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:09:30 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286208 (2286208) = #2286208/508:2.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286208 blocks [_NEC DVD_RW ND-3550A]
--------------------------------------------------------------

2:09:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [_NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682153984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286208 | lead-out | 1 | 0x41 | 0x00

2:09:30 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

2:09:30 PM #17 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

2:09:30 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

2:09:30 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)

2:09:30 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:09:30 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05DB3E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

2:09:30 PM #22 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: Yes

2:46:29 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05DB3E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

3:15:20 PM #24 SCSI -1114 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03DA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x21 0x97 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

3:15:20 PM #25 CDR -1114 File Writer.cpp, Line 311
Reset occurred

3:15:23 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:15:23 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:15:23 PM #28 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)

3:15:24 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

3:15:24 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\CDUDF.SYS': Ver=5.0 (136) Daily-Beta 11/13/00, size=228768 bytes, created 11/13/2000 11:10:08 AM
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 8/28/2004 8:57:01 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 9/29/2004 5:43:15 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ + quote]

This message has been edited since posting. Last time this message was edited on 27. December 2005 @ 03:33

whompus

Senior Member

26. December 2005 @ 12:40

Link to this message

From looking at your log you need to first remove the sn# starts with 1a20

Then turn on dma.
And maybe update Nero.

[ + quote]

Take a minute or two and read some
http://www.afterdawn.com/guides/
http://www.afterdawn.com/news/

alkohol

AfterDawn Addict

26. December 2005 @ 16:30

Link to this message

Quote:
1aXXXXXXXXXXXXXXXXXXXXXXXXX

You need to EDIT out your Nero serial number before any hackers hacked your serial and use it for free.

Quote:
Nero API version: 6.6.0.5

Nero is old, update to the latest 6.6.0.18 (one of Nero's best version so far).

Quote:
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05

Rpc forum reported that it's the latest firmware. http://forum.rpc1.org/dl_firmware.php?download_id=2157

Quote:
DiskPeripheral : ST3100011A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 1 DMA: Off

One of your Hard drive (either Primary or Secondary) DMA is Off, and your NEC burner's DMA is Off. Both needs to enable back On -- to enable DMA back On, try this http://forums.afterdawn.com/thread_view.cfm/260038 -- you need to "uninstall" it's drivers.

Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286057 (508:00.57, 4464MB)

This is too close to the edge, try to customize to at least 4400MB with high quality media like genuine Taiyo Yuden, Verbatim "advanced azo" or "datalife plus" or Maxell (Hitachi Corp. - made in japan).

Quote:
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R

Again, try to "update" your Nero to the latest and make sure you use high quality media as mentioned above.

Quote:
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

Your burner don't like the media you're using. Perhaps, try some DVD+R high quality media as mentioned above.

Quote:
Burn process failed at 16x (22,160 KB/s)

This is crazy, slow down to 4X. Yes... 4x is the most recommended speeds for burning at AfterDawn. I don't even dare to go beyond 4X or 8X even if I'm using top notch media like YUDEN, Verbatim and Maxell (made in japan by Hitachi Corp.) For more info on burning at 16X versus burning at 4X, go here http://forums.afterdawn.com/thread_view.cfm/265933

Quote:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 8/28/2004 8:57:01 AM

Go here http://www.downloadjunction.com/product/store/15199 and get Roxio Zapper to completely wipe out Roxio from your system, then restart. Roxio and Nero conflicts one another, therefore you're geting "coasters".

[ + quote]

WARNING: Do not "update/upgrade" your SAMSUNG BD-D5XXX series (Bluray Player), or else you cant enjoy any of your movie files.
How 2 downgrade Samsung BD-D5XXX Series Bluray player http://forum.samygo.tv/viewtopic.php?f=18&t=4244

This message has been edited since posting. Last time this message was edited on 27. December 2005 @ 09:37

creaky

Moderator

27. December 2005 @ 03:33

Link to this message

serial number edited out

[ + quote]

Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.