Hello,
I am having trouble buring DVDs. The Nero logfile contains a "Unspecified target error" but I also see "KEY_HARDWARE_ERROR" and "KEY_ILLEGAL_REQUEST" which seems up to no good.
I followed the advices in related threads. Nero has been upgraded now to version 6,6,0,18 and I loaded the latest firmware on the AOPEN DUW1616/ARR burner (1030). After restarting the PC the problems still remain.
Simulation of a DVD burn gives "simulation not possible on media" so I cannot include a simulation log file.
Down below I include the logfile of a DVD burn trial.
Writing CDs however goes fine, simulating as well.
The very first DVD I burned went fine however (some weeks ago). The next gave problems as mentioned. I am using one type and brand: DVD +R That's Write and haven't tried others yet.
System information in addition to the logfile:
P4, 3.2 GHz, 1536 Mb, WinXP 5.1 service pack 2.
AOPEN DUW 1616/ARR with DMA=on
If anyone has a suggestion please let me know. Thank you in advance.
Ben.
==========
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <AOPEN DUW1616/ARR> Version: 1030 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVD SOHD-16P9S >Version: FS09 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1616/ARR atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6L200M0 BANC viamraid Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6B200M0 BANC viamraid Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-16P9S E: CDRom0
AOPEN DUW1616/ARR F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572076kB)
Free physical memory: 1062MB (1087936kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2005
ISO compilation
13:59:24 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:59:24 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:59:24 #3 Text 0 File Writer.cpp, Line 122
Writer AOPEN DUW1616/ARR running
13:59:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
13:59:24 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
13:59:24 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 20079 ( 4:27.54, 39MB)
13:59:24 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
13:59:24 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: AOPEN DUW1616/ARR, Media type: DVD+R
13:59:24 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:59:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 20080 (20080) = #20080/4:27.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20080 blocks [AOPEN DUW1616/ARR]
--------------------------------------------------------------
13:59:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [AOPEN DUW1616/ARR] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 41123840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
20080 | lead-out | 1 | 0x41 | 0x00
13:59:24 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
13:59:24 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
13:59:24 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
13:59:24 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
13:59:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:59:25 #17 Text 0 File WriterStatus.cpp, Line 116
<AOPEN DUW1616/ARR > start writing Lead-Out at LBA 20080 (4E70h), lenght 0 blocks
13:59:25 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
13:59:25 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 469.3x (647.740 KB/s)
13:59:25 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
13:59:25 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:59:25 #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C7E0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
13:59:25 #23 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
13:59:25 #24 Text 0 File DVDR.cpp, Line 6168
Drive: AOPEN DUW1616/ARR
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
13:59:25 #25 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
13:59:25 #26 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
14:00:08 #27 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C230000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x91
Sense Qual: 0xC2
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x91 0xC2
14:00:08 #28 CDR -400 File Writer.cpp, Line 311
Unspecified target error
14:00:08 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
14:00:08 #30 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
14:00:08 #31 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
14:00:08 #32 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00
14:00:08 #33 Text 0 File DVDR.cpp, Line 6168
Drive: AOPEN DUW1616/ARR
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
14:00:08 #34 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
14:00:08 #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
14:00:08 #36 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25-7-2005 11:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25-7-2005 11:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25-7-2005 11:53:30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4-8-2004 13:00:00 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
==========
|