|
|
|
Error Codes using Nero and Lite-On SHW 1635SX
|
|
|
REEB
Newbie
|
2. January 2006 @ 05:56 |
Link to this message
|
|
I have purchased a new Lite-On 1635S external burner. I have not successfully burned one disk...have created many coasters..and am frustrated.
I have received several messages...orginally it was...can not perform end of disk-at-once. I have turned this function "off" in my settings hoping that would solve the problem. Didn't. I also updated firmware... I have tried different burning speeds...have tried Sony, Verbatim - R and + R, Memorex +RW disks.
My original burner was a Sony...that died, (I think -- had problems with that burner too..at least I was able to burn with it at first)..and was using My DVD. Have uninstalled MyDVD.
As mentioned above, I have an external burner...connected by USB 1.1 port. This could be the problem...
Have included my log from the last attempt.
Have contact Nero Support..and sent log to them. No word...been several days...
Your help is greatly appreciated.
====================================================================
1A20-0218-0*
1A20-0218-0*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B F: CDRom0
TEAC CD-W524E G: CDRom1
LITE-ON DVDRW SHW-1635S H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 164MB (168564kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.12.2005
UDF/ISO compilation
4:51:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
4:51:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
4:51:48 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:51:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
4:51:49 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
4:51:49 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
4:51:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:51:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:51:49 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:51:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 752191 (167:09.16, 1469MB)
4:51:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: DVD)
4:51:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
4:51:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:51:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 752192 (752192) = #752192/167:9.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
4:51:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
752192 | lead-out | 1 | 0x41 | 0x00
4:51:52 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:51:52 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:51:52 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:51:52 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
4:51:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:51:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only)
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
4:52:03 PM #22 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0
4:52:03 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
4:52:03 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
5:13:20 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06E00000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
5:13:22 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
17:13:22.015 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later
5:13:24 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C1D0E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
5:13:24 PM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed
5:13:24 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:13:24 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:13:24 PM #31 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD+RW
Changing the Book Type was finished successfully, return code 0
5:13:24 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
|
Advertisement
|
 |
|
|
Senior Member
|
2. January 2006 @ 06:17 |
Link to this message
|
I see something in your log that can/will cause problems:
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
You have Nero's INCD packet writing software installed and it conflicts with Nero (go figure that one?). It needs to be completely un-installed using Nero's incd zapper:
http://www.nero.com/nero6/enu/InCD_CleanTool.html
Your memory available was a little low, but shouldn't have caused this problem.
See if removing INCD helps, it needs to go anyway.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 06:17
|
|
tracker33
Suspended due to non-functional email address
|
2. January 2006 @ 06:53 |
Link to this message
|
|
Here's hoping MaxBurn can help me out as well? I'm new to this site and hoping that it will be of great help to me. I'v been using DVD Decrypter and DVD shrink for some time now with no problems...until recently. More specifically I can decrypt, it appears to shrink but can't complete the burn? I'm confused and am wondering what I need to change to get over this problem. The last dvd I tried working with was Batman Begins and here's the message I received(see below). This jargon means little to me so I'm hoping you can help?
Thanks in advance!
Burn Process failed at 4x 5,540 kb/s
1A20-serial number removed
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 04:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <BENQ DVD DUAL DW1610> Version: B8T9 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLlct20 40 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DUAL DW1610 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CRW-5232AS atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DUAL DW1610 E: CDRom0
ASUS CRW-5232AS F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261680kB)
Free physical memory: 80MB (82284kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.1.2006
NeroAPI
16:21:28 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
16:21:28 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
16:21:28 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
16:21:30 #4 Text 0 File Reader.cpp, Line 127
Reader running
16:21:30 #5 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DUAL DW1610 running
16:21:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
16:21:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:21:30 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:21:30 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
16:21:31 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
16:21:31 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
16:21:31 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: BENQ DVD DUAL DW1610, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193
16:21:31 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:21:31 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [BENQ DVD DUAL DW1610]
--------------------------------------------------------------
16:21:31 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [BENQ DVD DUAL DW1610] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
16:21:34 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
16:21:34 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
16:21:34 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
16:21:34 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
16:21:34 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:21:34 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
16:21:34 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON
16:21:34 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
16:21:34 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
16:24:46 #25 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xD0 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
16:24:46 #26 CDR -1135 File Writer.cpp, Line 311
Write error
16:24:46 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:24:46 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
16:24:47 #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 249855
16:24:47 #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
16:24:47 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
16:24:47 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDR
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 08:36
|
|
REEB
Newbie
|
2. January 2006 @ 07:58 |
Link to this message
|
MaxBurn....I downloaded Nero INCD clean tool...and deleted program(s)per your request.
Tried a burn....still no luck.....I notice these errors...(below)
Have also sent the new complete log...
Any other suggestions....
Thanks again for your help....
Trying to burn pictures/movies of my niece's wedding in San Diego. Want to send to her ASAP. In my previous attempts...the burn goes to about 70%....and can view that in much in the DVD player....the menu's are created...pictdures OK..music OK...but the movie stops just after the ceremony.
Reeb
====================================================
12:21:28 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B840000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
===================================================================
New Log
===================================================================
1A20-0218-0
1A20-0218-0
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B F: CDRom0
TEAC CD-W524E G: CDRom1
LITE-ON DVDRW SHW-1635S H: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 150MB (153704kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.12.2005
UDF/ISO compilation
12:11:04 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:11:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:11:05 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:11:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:11:05 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
12:11:05 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
12:11:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:11:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:11:06 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:11:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 752191 (167:09.16, 1469MB)
12:11:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: DVD)
12:11:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
12:11:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:11:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 752192 (752192) = #752192/167:9.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
12:11:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
752192 | lead-out | 1 | 0x41 | 0x00
12:11:09 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:11:09 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:11:09 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:11:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:11:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:11:10 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only)
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
12:11:13 PM #22 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0
12:11:13 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
12:11:13 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
12:21:28 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B840000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:21:30 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
12:21:30.218 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later
12:21:33 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C1E0E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x22 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
12:21:33 PM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed
12:21:33 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:21:33 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:21:33 PM #31 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD+RW
Changing the Book Type was finished successfully, return code 0
12:21:33 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
Moderator
|
2. January 2006 @ 08:36 |
Link to this message
|
@tracker33 -
i've edited out your serial number..
Quote:
Nero API version: 6.6.0.16
- Nero's a couple versions out of date, latest 6.x version is 6.6.0.18, you might want to download "update package 1" from here - http://ww2.nero.com/enu/nero-up.php being as you need to get rid of Nero's InCD anyway (see my last comment)
Quote:
Recorder: <BENQ DVD DUAL DW1610> Version: B8T9
- if you have the "Bulk" Version of this burner (ie if the BenQ brand is not displayed on the tray of the drive) then your burners' firmware's out of date, G8T9, dated 8th Jun 2005, is here - http://www.benq.us/ServiceAndSupport
However if you have the "Retail" Version of this burner (ie if the BenQ brand is displayed on the tray of the drive) then your firmware is up to date.
Quote:
Physical memory : 255MB (261680kB)
Free physical memory: 80MB (82284kB)
Memory in use : 68 %
- 512MB is what i consider the minimum for dvd work. you should get more memory, and for now you're gonna have to dig deep to close down as much as you can to free up more memory
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
- you're burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Recorder: BENQ DVD DUAL DW1610, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193
- what can i say, these are some of the most awful atrocious, utter rubbish dvd media you can buy, and you bought them! (sorry but they're awful, glance at my signature where CMC discs play the starring roles)
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Write error
- see previous comment
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 (InCD4 driver for win NT/2K/XP)
- InCD is Nero's 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD. As i said further up the reply, you may want to update to 6.6.0.18 (if you have broadband, the update is about 100MB)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 09:16
|
|
tracker33
Suspended due to non-functional email address
|
2. January 2006 @ 09:07 |
Link to this message
|
|
thanks I'll give it a try!
|
|
Bigfatboy
Member
|
2. January 2006 @ 10:16 |
Link to this message
|
@REEB
Quote:
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
your aspi layer needs updated
get aspi here - http://www.adaptec.com/worldwide/support/drivers_by_product.jsp?c...
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
your still need to uninstall nero, use nero clean tool, reinstall nero without incd
peace
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 10:23
|
|
REEB
Newbie
|
2. January 2006 @ 12:42 |
Link to this message
|
|
Thanks..BigFatBoy.....I tried downloading the updated ASPI....per your suggestion. Got it downloaded...was following instructions on their website....but when I opened the INSTALL.BAT file...the command box would not let me add the "text" they suggested on their website...and when I hit a key...the box closed without any execution.
"Run from the menu, and then the Browse button. Locate the INSTALL.BAT file in the directory the files extracted to and select the OPEN button. In the command box, add a space and either XP32 for Pentium I/II/III/IV processors or XP64 for Itanium processors. The command should look like: c:\adaptec\aspi\install.bat XP32 or c:\adaptec\aspi\install.bat XP64. Then select the OK button to run the XP installer."
As stated above...couldn't add the line...and no OK button. I had sent the wrong log...and the new one shows the INCD gone...
Any other suggestions...
Reeb
============================================================
1A20-0
1A20-0
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B F: CDRom0
TEAC CD-W524E G: CDRom1
LITE-ON DVDRW SHW-1635S H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 311MB (318500kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
UDF/ISO compilation
11:19:46 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:19:47 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:19:47 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:19:47 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:19:47 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
11:19:47 AM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
11:19:48 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:19:48 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:19:48 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:19:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 752191 (167:09.16, 1469MB)
11:19:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: DVD)
11:19:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
11:19:49 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:19:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 752192 (752192) = #752192/167:9.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
11:19:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
752192 | lead-out | 1 | 0x41 | 0x00
11:19:51 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:19:51 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:19:51 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:19:51 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
11:19:51 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:19:51 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only)
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
11:19:56 AM #22 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0
11:19:56 AM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
11:19:56 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:40:08 AM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B860000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:40:10 AM #26 Text 0 File Cdrdrv.cpp, Line 1288
11:40:10.265 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later
11:40:13 AM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
11:40:13 AM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed
11:40:14 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:40:18 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:40:19 AM #31 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD+RW
Changing the Book Type was finished successfully, return code 0
11:40:19 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
|
REEB
Newbie
|
2. January 2006 @ 16:47 |
Link to this message
|
|
Bigfatboy: Got the ASPI driver updated....instructions on their website were incorrect. You have to open the "aspiinst.exe" file...it updates/extracts itself.
With the update...tried a couple of more burns....failed again....
back to square one.....making more coasters...
Reeb
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
Senior Member
|
2. January 2006 @ 18:04 |
Link to this message
|
Sorry for getting in here late guys, but i was burning some CDs and DVDs and only have one computer now, so i wasn't on the net.
@REEB
Try this ASPI link, your system aspi is corrupted.Quote:
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
See the ??? in there? It means your system ASPI is still corrupted, and this will cause a failed burn easily, all by itself.
and Quote:
Bus Type : default (0) -> ATAPI, detected: ?
in vers 6 this ? is ok only if your burner is external and you stated earlier it was.
The force aspi tool might be a better fix for you.
http://www.afterdawn.com/software/cdr_software/cdr_tools/frcaspi.cfm
Its called force aspi 1.7 and heres part of the description Quote:
The scripts which make up ForceASPI will automatically detect your operating system and install the appropriate files correctly.
It works when other attempts to fix system ASPI fails.
Everything else looks pretty good in your last log.
This one says force aspi 1.8 but i haven't used it.
http://force_aspi_18.w.interia.pl/
Also Nero has its own aspi and it works fine:
http://www.nero.com/nero6/enu/WNASPI32.DLL.html
or
http://www.nero.com/nero6/enu/NEASPIEN.EXE.html
that one supposed to have instructions with it.
Also, if it hasn't been answered, a USB 1.1 is def not the way to go for DVD burning on an external. It will limit your data transfer rate, and that will limit your burn speed. You should have at least a USB 2, or firewire connection for an external.
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 18:12
|
|
REEB
Newbie
|
3. January 2006 @ 03:26 |
Link to this message
|
|
MaxBurn....sending my last log....didn't on the previous post..this shows the updated ASPI...might try changing to your other suggestions..but this current one shows "ok"...
Interestingly, the burn always stops at the exact same spot in the creation of the dvd pictures/movie....at 71%. Maybe the problem is with the actual video file. I am trying to burn off of the HD. I tried the rendering/burning...but that was taking 1 1/2 hours..to see if it worked. So...I copied to the HD..and am burning from it which takes about 30 minutes.
No one has addressed this error message below....could that be the problem????
Thanks for your help...
Reeb
=================partial log============================
8:39:33 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B850000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:39:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
20:39:34.453 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later
8:39:36 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
8:39:36 PM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed
8:39:36 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:39:37 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:39:37 PM #31 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD+RW
Changing the Book Type was finished successfully, return code 0
8:39:37 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
==========================Complete log==========================
1A20-0
1A20-0
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0V - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W524E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8160B F: CDRom0
TEAC CD-W524E G: CDRom1
LITE-ON DVDRW SHW-1635S H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 246MB (252256kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
UDF/ISO compilation
8:18:07 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:18:07 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:18:07 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:18:07 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:18:07 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:18:07 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-1635S running
8:18:07 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:18:07 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:18:08 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:18:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 752191 (167:09.16, 1469MB)
8:18:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
8:18:09 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
8:18:09 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:18:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 752192 (752192) = #752192/167:9.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 752192 blocks [LITE-ON DVDRW SHW-1635S]
--------------------------------------------------------------
8:18:10 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1540489216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
752192 | lead-out | 1 | 0x41 | 0x00
8:18:10 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:18:10 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:18:10 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:18:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
8:18:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:18:10 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: embossed data (Read-only)
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
8:18:15 PM #22 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0, Mode 2 return code 0
8:18:15 PM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
8:18:16 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
8:39:33 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B850000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
8:39:34 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
20:39:34.453 - LITE-ON DVDRW SHW-1635S\H2 T0 : Queue again later
8:39:36 PM #27 SCSI -1076 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03350200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x28
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x07 0xD8 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x28 0x00
8:39:36 PM #28 CDR -1076 File Writer.cpp, Line 311
Disc changed
8:39:36 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:39:37 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:39:37 PM #31 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SHW-1635S
Book Type request [LO], rev 3: DVD+RW
Changing the Book Type was finished successfully, return code 0
8:39:37 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
|
REEB
Newbie
|
9. January 2006 @ 15:53 |
Link to this message
|
|
Still making coasters....tried all suggestions.....any others before I put this thing back in the box and take it back to Circus City??
Appreciate all help...
Reeb
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
Senior Member
|
10. January 2006 @ 03:24 |
Link to this message
|
In your last log, i couldn't see anything major that would cause a failed burn. That last error you pointed out comes back as Quote:
Parameter value invalid
and this is what is stated about that error code Quote:
These errors are difficult to specify a cause for. Most of the times the problem is in the system.
Before you go changing out things, try different media. Sometimes that is the only problem, and in your case we are getting down to media or drive. I would try different GOOD media first. Your other drive looks like a ROM drive, so we cant use it for burn testing. Maybe you have a bad drive, since you never got a good burn from it. If you get down to replacing the drive, i would go with an internal, as you only have USB 1.1 . Internal drives are easy to install. On my computer it was loosen 2 thumb screws on the case, remove 2 screws holding the drive, remove 2 cables. Install was the reverse of that. Took me all of 10 minutes. You should be able to get a refund on the external, and with that money you can get an internal (they are also usually cheaper than externals) Try different media first.
Die CMC Mag!!!
|
|
Advertisement
|
|
|
|
REEB
Newbie
|
10. January 2006 @ 15:37 |
Link to this message
|
MaxBurn--- I had MyDvd installed...and had previously used it with a Sony DVD burner which is now defunked. I uninstalled MyDvd per a suggestion that it might be interferring with the Nero.
I could reinstall and try it again...
Any advice here??
Reeb
REEB
Sony PCV-RX650 Vaio
1.60 Ghz, 512 MM; 80Gig
Lite-On 1635S Burner External...using 1.1 USB port
Nero 6.6.0.18;
|
|
