|
|
|
Nero can not recognize 16XDVD writer
|
|
|
jzlhp
Suspended due to non-functional email address
|
2. January 2006 @ 07:21 |
Link to this message
|
|
I have a LG GSA-4160 16X DVD Writer and a Pioneer DVR-109 16X DVD Writer. I installed them in two diffenent computers. The problem is that when I use nero to burn DVD, the maximum speed I can choose in nero is only 4X, not 16X. (Both 8X DVD-R and 16X DVD-R were tested).
|
|
Advertisement
|
|
|
|
Moderator
|
2. January 2006 @ 09:31 |
Link to this message
|
|
hi..
if you use Nero 6 - let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
if you use Nero 7 - let's have LAST section of your Nero log which lives in C:\Program Files\Nero\Nero 7\Core\NeroHistory but DO NOT post your serial number which usually begins with '5C80' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 09:31
|
|
Fastzip
Newbie
|
2. January 2006 @ 11:00 |
Link to this message
|
I am having a similar problem. I own a Sony DRU-540A DVD Burner which is capable of burning DVD+R at 12x. I am using Verbatim DVD+R 16x discs but Nero is only burning them at 4x. Any help would be greatly appreciated.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-540A> Version: 1.0b - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75CAA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-540A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-540A D: CDRom0
HL-DT-ST CD-RW GCE-8400B E: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 61MB (62620kB)
Memory in use : 88
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
NeroAPI
5:10:55 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
5:10:55 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
5:10:55 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
5:10:56 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
5:10:56 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
5:10:56 AM #6 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-540A running
5:10:56 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:10:56 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:10:56 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:10:56 AM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
5:11:12 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
5:11:12 AM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
5:11:12 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-540A, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
5:11:12 AM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
5:11:12 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [D: SONY DVD RW DRU-540A]
--------------------------------------------------------------
5:11:12 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-540A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
5:11:12 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:11:12 AM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
5:11:12 AM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
5:11:12 AM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
5:11:12 AM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 4x (5,540 KB/s)
5:11:12 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:11:12 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:11:12 AM #24 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:25:23 AM #25 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DRU-540A> start writing Lead-Out at LBA 2286144 (22E240h), length 0 blocks
5:25:23 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:25:51 AM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 4x (5,540 KB/s)
5:25:52 AM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:25:52 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 2/1/2003 9:17:44 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
|
Jeanc1
Suspended permanently
|
2. January 2006 @ 11:23 |
Link to this message
|
The speed you burn is not only a factor of what Nero will burn -- Your Drive firmware is very much an important factor.
Have a look at the test done on a Sony DRU-540A like yours -- and see how it performed under ideal conditions on various media.
http://www.anandtech.com/storage/showdoc.aspx?i=2166&p=6
Modern burners have an error testing criteria whereby they will slow down when they see an excessive amount of errors while burning. -- same goes for Nero who reduces speed in accordance with this error ratio the burner is confirming.
Manufacturers will upgrade the firmware to correct for newer technology developed by software or media companies -- so it is important that you look for any update in firmware.
This message has been edited since posting. Last time this message was edited on 2. January 2006 @ 11:24
|
|
Advertisement
|
|
|
Moderator
|
2. January 2006 @ 11:31 |
Link to this message
|
@Fastzip -
re the 12x, why such high burn speeds ?, see this link and the links within it for some ppl claiming success with movie burning at 16x - http://forums.afterdawn.com/thread_view.cfm/280447
Quote:
Recorder: <SONY DVD RW DRU-540A> Version: 1.0b
- firmware's up to date, albeit real old now, ie Aug 2004!
Quote:
Physical memory : 511MB (523276kB)
Free physical memory: 61MB (62620kB)
Memory in use : 88
- sufficient total memory but no free memory left. you need to close down more programs prior to ALL dvd work/burning to free up more memory
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
- 4465MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)
- eh ?
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 2/1/2003 9:17:44 PM
- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
