|
Hi:
I?m new at DVD burning so I apologize for stupid comments in advance!
I have an HP Notebook (p4, 2GHZ, xp with Service Pack 2 and all updates) with USB 1.1. I purchased an external DVD Writer so that I could use the firewire feature (no USB 2.0 ports). The Writer is a Sony DRX-800UL (16X, Dual Layer, etc). This is not an internal drive in a drive enclosure box. It is a standalone external unit. I updated the firmware today to KY06. The drive came with Nero Express. For media, I?m using: for CD?s: HP and Verbatim. For DVD:s: Maxell 8X +R and Maxell 8X-R.
Here?s the problem: I can play back CD?s and DVD?s with the drive. I can burn CD?s on the drive, but I can?t burn DVD?s on the drive. The result is always the same: Nero reads the buffer then stalls during the lead-in phase, at 4% finished. It will sit at 4% until Ctrl-Alt-Delete (it sat at 4% for over an hour on my last try). The DVD is ruined and can?t be read in any DVD player. I?ve been using DVD Shrink 3.2 to rip the DVD files to my hard-drive without a problem. Therefore, I?m left to believe there must be a problem with either the media I am recording on or ____.?????
The burner is new so I haven?t had any positive results yet. It passes Sony?s Drive Check program and Nero?s Speed Test program, Could the problem be incompatibility between Nero and Firewire? Nero and SP2? I've read in the forums about ATAPI problems but I don't know what this is or what to check.
Thanks for any suggestions. The Nero error log follows:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 2 TA 0 - 6.6.0.14
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <QSI CDRW/DVD SBW-241>Version: VH07 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-241 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-241 D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522736kB)
Free physical memory: 138MB (142164kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2006
ISO compilation
11:59:18 AM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:59:19 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
11:59:19 AM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
11:59:19 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
11:59:20 AM #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
11:59:21 AM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 428719 ( 95:16.19, 837MB)
11:59:21 AM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
11:59:21 AM #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
11:59:21 AM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:59:21 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 428720 (428720) = #428720/95:16.20
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 428720 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
11:59:38 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 878018560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
428720 | lead-out | 1 | 0x41 | 0x00
11:59:38 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:00:09 PM #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
12:00:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:00:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
12:00:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:00:10 PM #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode
12:00:10 PM #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
12:00:10 PM #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes
12:00:10 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:01:05 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
12:01:05.470 - SONY DVD RW DRU-800A\H2 T0 : Queue again later
1:08:07 PM #22 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
1:08:24 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C060000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
1:08:24 PM #24 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0C900600
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
1:08:24 PM #25 Text 0 File Mmc.cpp, Line 19224
Writer-Buffer for SONY DVD RW DRU-800A\H2 T0 reduced to 32768Bytes
1:08:24 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E86800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data:
1:08:24 PM #27 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 703
1:08:24 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03E847B8
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
1:08:25 PM #29 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
SONY DVD RW DRU-800A\H2 T0
1:08:25 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
1:08:26 PM #31 CDR -600 File WriterStatus.cpp, Line 172
Device not available
SONY DVD RW DRU-800A\H2 T0
1:08:26 PM #32 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
1:08:27 PM #33 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
