|
|
|
Nero 7, Sony DRU-800A burning errors
|
|
|
evaaseow
Newbie
|
3. January 2006 @ 02:45 |
Link to this message
|
|
Hi to everyone, new to the forum but so far i'm loving it. Lot's of great information for the community of burning.
Unfortunately i'm at work and do not have the log file but once I get home I will edit this post with it. I have read a few other posts which have had similar problems with burning with the Sony DRU-800A and nero. BTW, i'm using the brand MAXELL.
Just some background on what i'm trying to do. I have avi's which I wish to be burned onto a DVD. Here is the process that I have done. I have coverted the avi's to the correct mpg format. Then using ULEAD Movie Factory I created the menus, chapters etc...and exported the VIDEO_TS and AUDIO_TS folders so they can be used to burn with NERO. When I try to "SIMULATE" (and yes I have tried to burn as well) the process I get an illegal disc error during the lead-in. I get to about 4% of the process when this illegal disc fail happens.
I have even tried to burn without the menus and stuff, using DVD authoring to create the VIDEO_TS and AUDIO_TS folders and using nero burning ROM to burn straight to DVD. Still can't even get through the simulate process getting the illegal disc error.
A few points:
I have the latest sony firmware KY06.
I have enough memory that this process should not be a problem.
The burner worked when I used CloneDVD for ISO formatted files so I would presume its not a hardware issue.
I also have burnt a few discs using ROXIO DVD BUILDER creating menus in that thought I must say roxio is not very flexible when it comes to that.
I have tried to do this with a few different AVI's getting the same error.
I do not burn to the or even close to the edge of the disc.
DMA is turned on.
One other disturbing this: I tried to do the burn process in ULEAD movie factory thinking that my Nero config was wrong or my burner was not compatible but I got a burn error during the ULEAD proces too! This did not make me feel good.
I have tried ULEAD and NERO now to burn, a couple of different authoring softwares and still have had no luck with the avi's. But like I said I have burnt with this recorder recently using an ISO image so I just have no idea anymore.
I am lost, and out of ideas. I have combed many many forums to see if i'm missing anything but I cannot seem to find the problem. If anyone can help it would be greatly appreciated. If you have any suggestions from reading this great, if you need the logfile I will update the thread as soon as I get home.
Thanks to everyone at Afterdawn.com
This message has been edited since posting. Last time this message was edited on 3. January 2006 @ 02:59
|
|
Advertisement
|
 |
|
|
Moderator
|
3. January 2006 @ 09:04 |
Link to this message
|
hi, presuming you use Nero 6... ...let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
You can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
evaaseow
Newbie
|
3. January 2006 @ 13:47 |
Link to this message
|
ok here is my error log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 3 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW DRU-800A >Version: KY06 - HA 1 TA 3 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CD-R/RW RW7083A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-800A D: CDRom3
CD-R/RW RW7083A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 463MB (474904kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
UDF/ISO compilation
6:43:58 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
6:43:58 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
6:43:58 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:43:58 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
6:43:58 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
6:43:58 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:43:58 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-800A running
6:43:58 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:43:58 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:43:58 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
6:44:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1526015 (339:06.65, 2980MB)
6:44:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
6:44:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
6:44:35 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
6:44:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1526016 (1526016) = #1526016/339:6.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1526016 blocks [D: SONY DVD RW DRU-800A]
--------------------------------------------------------------
6:44:35 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3125280768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1526016 | lead-out | 1 | 0x41 | 0x00
6:44:35 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:44:35 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
6:44:35 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
6:44:35 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
6:44:35 PM #21 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (5,540 KB/s)
6:44:35 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:44:35 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
6:44:35 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
6:44:35 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
6:44:35 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:44:39 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
18:44:39.062 - D: SONY DVD RW DRU-800A : Queue again later
6:48:25 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 06 20 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x05180000: Len x10000
0x00 00 01 BA 44 01 D4 FB 4C DB 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 0D FF FF FF FF FF FF FF FF FF
0xFF FF FF FF 23 19 F0 0A A8 30 B4 74 72 58 BD DE
6:48:25 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: SONY DVD RW DRU-800A
6:48:25 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:48:25 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:48:25 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1567
6:48:30 PM #33 Phase 34 File dlgbrnst.cpp, Line 1725
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 1/13/2003 10:19:26 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
4. January 2006 @ 03:07 |
Link to this message
|
Quote:
Recorder: <SONY DVD RW DRU-800A> Version: KY06
- firmware's up to date - http://sony.storagesupport.com/dvdrw/firmware.htm#800
Quote:
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
- eh ?, what's happened there ?
Quote:
Illegal disc
- see previous comment
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.0.0.171 , size=24839 bytes, created 1/13/2003 10:19:26 AM
- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.microadvantage.net/utilities
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
evaaseow
Newbie
|
4. January 2006 @ 03:11 |
Link to this message
|
Quote:
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
for the above, I was doing a simulation so I wouldn't create another coaster but forgot to put in the blank disc needed for a simulation...its just an action not an error...but the roxio thing is probably it, i uninstalled Nero and now i can burn again with other programs WOOT. Next is to uninstall roxio and reinstall Nero. Thanks for your help and the link.
|
|
Advertisement
|
|
|
Moderator
|
4. January 2006 @ 04:27 |
Link to this message
|
|
cool, keep us posted, good luck
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
