|
|
|
nero 7 ultra iso burn errors
|
|
|
acelow
Newbie
|
3. January 2006 @ 06:07 |
Link to this message
|
|
hello
first time posting, I've a problem with nero 7 ultra. when I try to burn an iso image on a cd (rw or r) I am getting error messages about not able to perform fixation and the burn fails, however it will continue to run and burn the leadout and as far as I can tell the disk is not a coaster(it does this also with DVD's)Nero support was as useful as another hole in the head in fixing this problem. They said to update to 7.0.1.4...it didn't help. don't believe that this is a hardware issue, I've installed this software on two other pc's to see if it was a hardware problem but I still got the same errors. when I had nero 7.0.0.0 I didn't have this problem. the following is the error log I have compared it to a good burn using v7.0.0.0 and to my untrained eye the only differents other than the burner used were the incd sys files,
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0R - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9S >Version: FS07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
: epstw2k Port 3 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-16P9S H: CDRom0
LITE-ON DVDRW LDW-811S K: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1534MB (1571564kB)
Free physical memory: 869MB (890092kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
CD Image
9:33:17 AM #1 Text 0 File Burncd.cpp, Line 3048
LITE-ON DVDRW LDW-811S
Buffer underrun protection activated
9:33:17 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
9:33:17 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:33:17 AM #4 Text 0 File Writer.cpp, Line 113
Writer K: LITE-ON DVDRW LDW-811S running
9:33:17 AM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Track-At-Once, using CD-R/RW media
9:33:17 AM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 336074 ( 74:42.74)
Last address to be written: 274564 ( 61:02.64)
9:33:17 AM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:33:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW LDW-811S
9:33:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:33:17 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 274565 (274565) = #274565/61:0.65
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 274563 blocks [K: LITE-ON DVDRW LDW-811S]
--------------------------------------------------------------
9:33:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [K: LITE-ON DVDRW LDW-811S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 562616320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
274565 | lead-out | 1 | 0x41 | 0x00
9:33:17 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 274565 -> 274563.
9:33:17 AM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:33:17 AM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
9:33:17 AM #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
9:33:17 AM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
9:33:17 AM #17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (600 KB/s)
9:33:17 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
9:48:47 AM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:48:52 AM #20 Text 0 File MMC.cpp, Line 16379
<LITE-ON DVDRW LDW-811S > start Close Session
9:48:52 AM #21 CDR -1 File ThreadedTransferInterface.cpp, Line 1308
Unspecified Recorder Error
K: LITE-ON DVDRW LDW-811S
9:48:52 AM #22 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
9:48:52 AM #23 CDR -1 File ThreadedTransferInterface.cpp, Line 1308
Unspecified Recorder Error
K: LITE-ON DVDRW LDW-811S
9:48:52 AM #24 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
9:48:52 AM #25 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 1, size=29312 bytes, created 9/7/2005 3:42:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 1, size=8704 bytes, created 9/7/2005 3:42:58 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I did replace the incd*.sys files with the ones generated by v7.0.0.0 but it appears that this may not be the problem. if any one has any ideas please post. I don't want be stuck using v7.0.0.0 forever
|
|
Advertisement
|
|
|
|
Moderator
|
3. January 2006 @ 08:01 |
Link to this message
|
hi and welcome..
Quote:
Recorder: <LITE-ON DVDRW LDW-811S> Version: HS0R
- firmware's up to date - http://forum.rpc1.org/dl_firmware.php?download_id=1699 albeit dated Sep 2004!!
Quote:
Recorder: LITE-ON DVDRW LDW-811S
- a-ha, the firmware's not recognising whatever blank discs you're using. This 5line paragraph is an example of what you should be seeing when firmware's up to date - Quote:
Recorder: ASUS DVD-RW DRW-0402P;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)
Quote:
Unspecified Recorder Error
Could not perform Fixation
- see previous comment, try different discs
Quote:
Burn process failed at 4x (600 KB/s)
- for data cd's i do 24x max and for audio cd's i do 16x max
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 1, size=29312 bytes, created 9/7/2005 3:42:32 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 1, size=8704 bytes, created 9/7/2005 3:42:58 PM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 3. January 2006 @ 08:02
|
|
acelow
Newbie
|
3. January 2006 @ 12:00 |
Link to this message
|
thanks
tried your suggestions..updated the firmware, tried 6 diffent cd-rw brands, uninstalled Nero 7,used the Nero clean tool and the incd clean tool and reinstalled without the incd, am still getting the burn error messages, but I am still getting what appears to be good burns when I run the disks.as stated earlier, I have the first ver. of Nero 7 ultra 7.0.0.0 which burns iso images will no problem. I have used this new ver7.0.1.4 with a new LG dl burner and an older HP cd burner with the same error messages. When I use v7.0.0.0 I get a good burn each time.any other thoughts? this is my lastest log..I want to add that my system is XP pro w/sp2 and not win 2000. also why are my devices showing as scsi and why is ATAPI not being detected? could this be causing my problems?
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <LITE-ON DVDRW LDW-811S> Version: HSTQ - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9S >Version: FS07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
: epstw2k Port 3 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LDW-811S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00FMA0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-16P9S H: CDRom0
LITE-ON DVDRW LDW-811S I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1534MB (1571564kB)
Free physical memory: 786MB (805584kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2006
CD Image
3:23:27 PM #1 Text 0 File Burncd.cpp, Line 3048
LITE-ON DVDRW LDW-811S
Buffer underrun protection activated
3:23:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
3:23:27 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
3:23:27 PM #4 Text 0 File Writer.cpp, Line 113
Writer I: LITE-ON DVDRW LDW-811S running
3:23:27 PM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Track-At-Once, using CD-R/RW media
3:23:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 275845 ( 61:19.70)
3:23:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
3:23:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW LDW-811S
3:23:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:23:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 275846 (275846) = #275846/61:17.71
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 275844 blocks [I: LITE-ON DVDRW LDW-811S]
--------------------------------------------------------------
3:23:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [I: LITE-ON DVDRW LDW-811S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 565239808, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
275846 | lead-out | 1 | 0x41 | 0x00
3:23:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 275846 -> 275844.
3:23:27 PM #13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:23:27 PM #14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
3:23:27 PM #15 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
3:23:27 PM #16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
3:23:27 PM #17 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (600 KB/s)
3:23:27 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
3:38:48 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:38:54 PM #20 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 4x (600 KB/s)
3:38:55 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (600 KB/s)
3:38:55 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
3:54:27 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:54:32 PM #24 Text 0 File MMC.cpp, Line 16379
<LITE-ON DVDRW LDW-811S > start Close Session
3:54:32 PM #25 CDR -1 File ThreadedTransferInterface.cpp, Line 1308
Unspecified Recorder Error
I: LITE-ON DVDRW LDW-811S
3:54:32 PM #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
3:54:32 PM #27 CDR -1 File ThreadedTransferInterface.cpp, Line 1308
Unspecified Recorder Error
I: LITE-ON DVDRW LDW-811S
3:54:32 PM #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
3:54:32 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (600 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
3. January 2006 @ 12:04 |
Link to this message
|
Quote:
Recorder: LITE-ON DVDRW LDW-811S
- from that logfile entry it's the same problem re the firmware not recognising whatever blank discs you're using. The discs you're using must be newer than the firmware (dated 2004) knows what to do with. Firmware is what teaches your burner about media/burn speeds and if it can't recognise discs it's not gonna be able to burn properly
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 3. January 2006 @ 12:04
|
|
acelow
Newbie
|
5. January 2006 @ 16:44 |
Link to this message
|
|
I give up for now...uninstalled 7.0.1.4 and reinstalled 6.6. everything burns fine now. the media is recongized by my burner.I still think this is a software bug,the firmware updates had no effort on my pcs,I updated 3 different burners with no luck of solving the problems. I tried several different brands of media and still had errors.I remember when 6 first came out it was very buggy but after a few updates it was a good product. I guess I'll wait to they iron all the bugs out.
thanks for taking the time to help me.
|
|
Advertisement
|
|
|
Senior Member
|
5. January 2006 @ 20:43 |
Link to this message
|
Nero 7 is up to 7.0.1.4b. Not sure what the "b" version did, but i see lots of ppl posting with burn problems in Nero 7 that go away when going back to version 6. That tells me something in version 7 is buggy for some ppl. I went ahead and updated to Nero 7 and haven't had any problems burning so far. Go with the latest Nero version if you are having problems. And if you upgrade to version 7, keep the serial numbers to your old version 6. You might need to go back to it if you have burn problems. I really feel Nero is using us as Beta Testers for version 7. Each update fixes something they should have worked out before they released the product to the masses.
Die CMC Mag!!! |
|
