replaceing clicking hardrive

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Sunday 23.2.2025 / 08:14

Search AfterDawn Forums:

afterdawn.com > forums > archived forums > xbox - hardware boot discussion > replaceing clicking hardrive

Browse by topic

Forums

replaceing clicking hardrive

Jump to:

Posted

Message

manalmax

Newbie

4. January 2006 @ 18:13

Link to this message

the harddrive in my xbox started to click and i get the christmas led blniking and hte your xbox needs service thing. well i plan on puting a executer 3 ce in it and put in a 250 gig hd.

the problem is. wheneve ri put all that on there. i dont have a backup of my original hd , nor the bios files and all those files

if im loading evolution and allt aht with a dashboard and everythign. do i need those files from the original hd to make this work?

[ + quote]

manalmax

Newbie

5. January 2006 @ 17:15

Link to this message

anyone. please? I really need help before i do this

[ + quote]

veredes

Junior Member

6. January 2006 @ 06:44

Link to this message

No, you will probably want to use an autoinstaller and, as long as you are going to change the hard drive at the same time you install the chip, the only thing you will need to backup if you want to is your save files. Check out www.xbox-scene.org for imformation on how to get onto xbins for the bios files and dashboard files (autoinstaller).

[ + quote]

manalmax

Newbie

6. January 2006 @ 10:34

Link to this message

Thanky ou so much your a life saver. the only next thign i haft to ask is. when isntalling a exectuer 3 ce (( or any any xbox modhcip practically)) you got put those pin head into those pin holes on teh motherboard. well ont eh v1.0 thosxe holes ar efull of sodder. do i haft to desolder those holes or can i just solder on the pin head thingy onto of hte soldered holes and then just put on the chip?

[ + quote]

veredes

Junior Member

7. January 2006 @ 03:54

Link to this message

To remove the solder on the v1.0 boards I typically use a desoldering pump or a can of air. They are availible from radioshack and suck (or blow) the solder away from the iron. Sometimes you will have to add some solder to suck the original up. Seeing how it seams like you dont do a lot of soldering...I would use the wire method for the X3 rather than the pin header. Using this method, you would not have to take the chance of buring your board as you can just heat up the solder currently on the board, insert the wire and add some more solder to finish.

Good luck whichever you decide, just remember if you deside to remove the solder to use the pin header...dont leave the iron on the board for more than a few seconds at a time. If the board at anytime feels hot to the touch, should give it a couple of seconds to cool down before trying to desolder some more.

[ + quote]

manalmax

Newbie

7. January 2006 @ 09:09

Link to this message

thansk for the great afvice. ill post later afte rit all comes in and i try it

[ + quote]

afterdawn.com > forums > archived forums > xbox - hardware boot discussion > replaceing clicking hardrive


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.