Burn process failed at 4x (5,540 KB/s).Power calibration error?? nero7 with/ Nec Nd 3550A

AfterDawn Addict

1 product review

5. January 2006 @ 15:31

Link to this message

Hello everyone!
This is a great community! Thanks for everything you do.
This is my problem: I bought a DVD burner about a week ago NEC DVD_RW ND-3550A, I burned about 7 dvds,great quality, with Nero Express, and then I had about 6 burning errors. I spent about 30 hours in two days, reading forum after forum, trying to figure out the way to do it right9 I am totally new at this, I try to learn from practice).I checked and installed the ASPi files,I went at 3 AM at Walmart and bought some quality media - as I read in this forum, I bought Maxell DVD+R High Grade, Made in Japan.Previously I used some cheap Imation DVD-r. I copied one dvd, v. good quality(Maxell)-I used DVDDecrypt+Shrink+Nero Burning Rom.Then I tried to burn a DVD with NBRom, using a Video_TS that I had previously converted from avi using WiNAVI. I get this error that says Power calibration error. I Thought maybe my power supply was not good enough. I unplugged everythin I could, I restarted the computer, tried again--Now I get this no seek complete error?!? I attach one of the log files. can anyone help me please? I am tottaly out of hope. Is it Nero? Is it my system? My DVD burner? I get all these errors in the log file, but I am clueless.
Any suggestions appreciated.
Thank you.

Home
5Cxxxxxxxxxxxxxxxxxxxxxxxxxx

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DV-5700A >Version: 1.51 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5700A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
_NEC DV-5700A G: CDRom0
_NEC DVD_RW ND-3550A H: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523696kB)
Free physical memory: 299MB (306416kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.1.2006
UDF/ISO compilation
6:57:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started

6:57:06 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)

6:57:06 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:57:06 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted

6:57:06 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

6:57:06 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

6:57:06 PM #7 Text 0 File Writer.cpp, Line 113
Writer H: _NEC DVD_RW ND-3550A running

6:57:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

6:57:06 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

6:57:06 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

6:57:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1383519 (307:26.69, 2702MB)

6:57:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

6:57:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R

6:57:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:57:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1383520 (1383520) = #1383520/307:26.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1383520 blocks [H: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------

6:57:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [H: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2833448960, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1383520 | lead-out | 1 | 0x41 | 0x00

6:57:06 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:57:06 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

6:57:06 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

6:57:06 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

6:57:06 PM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)

6:57:06 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:57:06 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x03878a00: Len x804

6:57:06 PM #24 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03840c00: Len x6

6:57:06 PM #25 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03840c00: Len x6

6:57:06 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

6:58:18 PM #27 SPTI -1106 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x045e0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:58:18 PM #28 CDR -1106 File Writer.cpp, Line 302
Power calibration error
H: _NEC DVD_RW ND-3550A

6:58:18 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:58:18 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

6:58:19 PM #31 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders

6:58:19 PM #32 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully

6:58:19 PM #33 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03840c00: Len x6

6:58:19 PM #34 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03840c00: Len x6

6:58:19 PM #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Senior Member

5. January 2006 @ 15:44

Link to this message

For whatever reason it doesnt seem to like your media. Update Nero to 7.0.14b might help. Your firmware is newest for the drive I think. Also your system aspi is old I dont think its your problem but never know.

Take a minute or two and read some
http://www.afterdawn.com/guides/
http://www.afterdawn.com/news/

AfterDawn Addict

1 product review

5. January 2006 @ 15:48

Link to this message

Thank you. Do you think is it Nero or the NEC burner that doesn't like the media? Power calibration error?!!!???

Senior Member

5. January 2006 @ 16:00

Link to this message

That most of the time means it can not calibrate the write head in the burner for the media. You may be stuck waiting on a firmware update for the burner to use that media. If so just get some older media it does like for the meantime. I would get the update though for nero. It has many bugs worked out (not all mind you) that 7.0 had.

Take a minute or two and read some
http://www.afterdawn.com/guides/
http://www.afterdawn.com/news/

This message has been edited since posting. Last time this message was edited on 5. January 2006 @ 16:00

AfterDawn Addict

1 product review

5. January 2006 @ 16:03

Link to this message

Thanks a lot.
Now, what media should I try? What do you mean by old, manufacturing date, ot type(DVD-R instead of DVD+R)?

AfterDawn Addict

1 product review

5. January 2006 @ 16:08

Link to this message

One more question.Do you think a different burning software would work better, like imgburn, interdvd copy or something like that(I don't need all the fancy features that come with Nero( I have a craked version honestly, :(!, i guess cannot upgrade?!)
Thank you.

Senior Member

5. January 2006 @ 16:08

Link to this message

Not realy got to be old mfg date just needs to be compatible with the burner. I think videohelp has a media compatiblity list. Or just get whatever you where using before if any.

Take a minute or two and read some
http://www.afterdawn.com/guides/
http://www.afterdawn.com/news/

Senior Member

5. January 2006 @ 16:12

Link to this message

Ahhh that could be the problem. I dont think it is but never know. Try dvdshrink and dvddecrypter for doing dvd backups they are free. Imgburn is good and free as well but to use it you will need to use shrink or whatever to make iso of the dvd you want to backup

Take a minute or two and read some
http://www.afterdawn.com/guides/
http://www.afterdawn.com/news/

AfterDawn Addict

1 product review

6. January 2006 @ 17:39

Link to this message

Thanks a lot.I gave uo Nero,for now. A pain in the but to uninstall it, so I system restored. Had 6 good burns with DVDD and Shrink so far.
Again, thank you for your time:)!