|
lead-in write problems after changing booktype to DVD-ROM
|
|
lsargent
Newbie
|
7. January 2006 @ 22:25 |
Link to this message
|
I recently purchased some generic Dynex (Ritek) 16X DVD-Rs. I had success writing 3 discs, then manually changed my booktype settings in Nero for my drive to increase player compatibility. After that, whether I burned directly in Nero or through Shrink w/ Nero, I would acheive about a 2% overall completion, but never finish writing the lead-in where the booktype setting is stored. You could hear my drive working hard to write, but after about 20 seconds of the writing "lead-in" task, the process seemed to be in a neverending pause. The application would NOT freeze, it just kept acting like it was still in the beginning phase. No further progression would occur, and my blinking processor light was inactive. I would have even suspected a "non-responsive" program indication in the Task Manager, but no. Has anyone came across this problem? Could it possibly be the cheap media i was using?
|
AfterDawn Addict
|
7. January 2006 @ 22:32 |
Link to this message
|
Yes, it could be other things involved such as firmware updated for "book type" or media compatibility, the media you're using, and speeds. What kind of burner do you have and is the firmware up-to-date?
Are you using Nero 6 Ultra or Nero 7 Ultra? Let's have the "very last section" from your Nero logs. To get your log go here; C:\Program Files\Ahead\Nero\NeroHistory for Nero 6, or C:\Program Files\Nero\Nero 7\Core\NeroHistory for Nero 7. Now remember to "delete" or "edit" your Nero serial before you're going to post back here.
Below is an example from a successful burned log of mine.
Quote: ====== *** Nero Burning ROM, History File *** ======
David X
Home Use
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <======= (NOTICE: I edited my Nero serial number)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 532MB (544800kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.1.2006
Burn DVD Image
1:16:40 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:16:40 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
1:16:40 AM #3 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
1:16:40 AM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
1:16:40 AM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1808293 (401:50.43, 3531MB)
1:16:40 AM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:16:40 AM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:16:40 AM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:16:40 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1808294 (1808294) = #1808294/401:50.44
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1808294 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
1:16:40 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3703386112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1808294 | lead-out | 1 | 0x41 | 0x00
1:16:40 AM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:16:40 AM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:16:40 AM #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
1:16:40 AM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:16:40 AM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
1:16:40 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:16:40 AM #17 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:16:40 AM #18 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:16:40 AM #19 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
1:16:40 AM #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:28:13 AM #21 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 1808294 (1B97A6h), length 0 blocks
1:28:13 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:28:35 AM #23 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
1:28:35 AM #24 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
8. January 2006 @ 04:32 |
Link to this message
|
You can check for firmware updates at this site:
http://forum.rpc1.org/dl_search.php
Just enter your burner model in the search box and click search. If there is one download it to you desktop and double click on it and it should provide instructions or self install.
Cheers.
|
|