|
Xcuter 3 Troubles.
|
|
|
ichijin
Newbie
|
8. January 2006 @ 13:39 |
Link to this message
|
|
Hey all. I happend to pick up an Xcuter 3 recently, and it turns out that they no longer put the software and such on for you before they return it. I went ahead and put a bios onto it (as per instructions on their website). However, it seems I flashed it with the wrong bios version, and I can now no longer get the bios flasher screen to come back up, and booting into the normal MS dashboard gives me an error 05. Any help on this one is greatly appreciated.
P.S. I saw something somewhere about creating a disc of another xbox HD. (I do have a 2nd box with an xcuter3 if that technique will work somehow).
|
|
Advertisement
|
|
|
|
Member
|
9. January 2006 @ 16:28 |
Link to this message
|
|
Press the power and eject button at the same time, the X3 status logo should be purple. This will boot to the 256k backup flashbios and allow you to re-flash your chip.
|
|
ichijin
Newbie
|
9. January 2006 @ 18:22 |
Link to this message
|
|
It does change to purple, but the system doesnt do anything. I figured out that the error is because the harddrive is unlocked. Any idea how to lock it? None of the discs (even "boot" discs) will load from the system, and I cant FTP in, or anything else. Any help appreciated. Thanks.
|
Member
|
10. January 2006 @ 13:05 |
Link to this message
|
|
Do you have the eeprom.
|
|
ichijin
Newbie
|
10. January 2006 @ 13:31 |
Link to this message
|
|
I have access to another xbox with the same chip, and another xbox without any chips/softmods. I am just not sure how to proceed from here. It seems the only way I have found so far is to take the drive out and then do something to it once its in the PC.
|
Member
|
10. January 2006 @ 15:24 |
Link to this message
|
|
Ya if you have your eeprom, or you can lock it with your chip, but you said the bios wont boot.
|
|
ichijin
Newbie
|
10. January 2006 @ 15:33 |
Link to this message
|
|
What happend was, I ordered an xbox with the xecuter 3. It didnt come with any of the software stuff, so I was told I needed to put a bios on it. So I went through the tutorials on the xecuter site, and it flashed fine. (Went like the tutorial) Only problem is, the drive was unlocked before the flash. (I think the bios was ok?)
It does now:
Pressing power for a min (disables chip): Boots to MS standard loading, and then gives the service error 05 screen. (This mode while the MS stuff is loading is the only mode I can open the CD tray)
Pressing reset (booting with chip): Shows blank black screen, and does nothing. (Disc drive wont open, etc.)
Pressing Power and reset at the same time: Chip lights turn purple as its supposed to, but it sits at the black screen doing nothing.
Not honestly sure what the problem is, but those are the symptoms.
|
Member
|
10. January 2006 @ 16:57 |
Link to this message
|
Quote:
Only problem is, the drive was unlocked before the flash.
The hard drive was unlocked?
|
|
ichijin
Newbie
|
10. January 2006 @ 17:21 |
Link to this message
|
|
Yes. One of the tutorials I was reading said: Unlock the drive, then do the update. So I followed it, and now I am kinda screwed. Is it fixable?
|
Member
|
10. January 2006 @ 18:01 |
Link to this message
|
|
If you don't have an eeprom.
|
|
ichijin
Newbie
|
10. January 2006 @ 18:09 |
Link to this message
|
|
The new xbox is 1.6 (1.6b maybe?), and the old one is proabably 1.1 or very older ones as I have had it since they came out pretty much. I also have access to a later one that is not modded. With those, can you pm me or post here with what I need to do? Thanks.
|
Member
|
11. January 2006 @ 12:37 |
Link to this message
|
|
What you need to do?
|
|
ichijin
Newbie
|
11. January 2006 @ 19:02 |
Link to this message
|
|
Ok, it doesnt appear to be the harddrive. So what else is error 05? I pulled the HD out of that box, and put it in my other modded one, and it booted fine. Any ideas? Any help greatly appreciated.
|
Member
|
12. January 2006 @ 13:03 |
Link to this message
|
|
You dont still have the modchip or anything connected do you? Error 5 means the hdd is not locked.
|
|
ichijin
Newbie
|
12. January 2006 @ 13:42 |
Link to this message
|
|
The HDD is not the problem. If it was not locked, and causing the error 05, it should have done the same when I booted my other xbox with it.
I think the bios I flashed was the wrong version, or maybe even a bad one. Since it wont boot discs and such, how can I get a new bios flashed into it?
|
Member
|
12. January 2006 @ 17:54 |
Link to this message
|
|
You should be able to boot up to the flashbios with out even having the hdd plugged in. Flashing the bios has nothing to do with the hdd.
|
|
ichijin
Newbie
|
12. January 2006 @ 19:04 |
Link to this message
|
|
Error 05 claims the HD was locked/unlocked and that the system wont boot with it like that. I dealt with it as that being the problem. Its not the problem since it works perfectly in my other xbox (if it was still locked/unlocked, taht one should give error 05 also). So it has to be the flash bios. It did load a blue screen before I flashed it when you turned it on with the chip enabled. Now it wont, and it will not load from discs, etc.
How can I replace the bios when I cant load discs or the bios screen?
|
Member
|
13. January 2006 @ 12:29 |
Link to this message
|
|
Take out your hard druve and disc drive and make sure your modchip has a good connection. Then, Press the power and eject at the same time so the X3 logo turns purple (with the drives still out) and if it boots to the flashbios you can do an http flash.
|
|
ichijin
Newbie
|
13. January 2006 @ 15:16 |
Link to this message
|
|
Thanks. I will try that. If that doesnt work, does that mean its unfixable, or is there something else to do from there?
|
|
ichijin
Newbie
|
13. January 2006 @ 16:28 |
Link to this message
|
|
I got the HD out, and the DVD drive unhooked also. It turns purple as its supposed to, and the eject button light turns orange after a min, but it just sits like that aftewards. Doesnt seem this way is going to work either.
|
|
ichijin
Newbie
|
13. January 2006 @ 18:16 |
Link to this message
|
|
Little more info. I just took the drive out of my other xbox (with the Xecuter 3 chip, has evox, avalaunch, etc.) and put it in the nonworking one. It gave an error 6 on the MS boot, and same black nothing on chip boot.
|
Member
|
13. January 2006 @ 18:40 |
Link to this message
|
|
Try putting the chip in another one of your xbox's and press the eject and power at the same time to boot to the backup flashbios. Then flash the chip from that xbox, then after it's flashed move it back to your other box.
|
|
Advertisement
|
|
|
|
ichijin
Newbie
|
13. January 2006 @ 18:42 |
Link to this message
|
|
Its a soldered chip that I ordered. I dont have steady enough hands to do it. Was going to do the chip on my PS2 until I got it apart and saw what actually needed done. Heh. Ever used Xboxrepairguide (.com)? Was thinking of sending it off there.
|
