|
|
|
Illegal disk error in Nero
|
|
|
Longhorn1
Newbie
|
8. January 2006 @ 14:31 |
Link to this message
|
|
I have read every post and tried every fix on this topic. I still get Illegal Disk errors when trying to burn both TDK and Memorex DVR-R disks. I have burned both these disks successfully in the past. Below is one of the log files. Any help would be appreciated.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-720A> Version: JY07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6L250R0 BAH4 iteraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-720A F: CDRom0
LITEON DVD-ROM LTD163 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 580MB (594916kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2006
UDF/ISO compilation
1:43:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
1:43:18 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
1:43:18 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:43:18 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
1:43:19 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:43:19 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:43:19 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: SONY DVD RW DRU-720A running
1:43:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:43:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:43:19 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
1:43:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2290223 (508:56.23, 4473MB)
1:43:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:43:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
1:43:19 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:43:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2290224 (2290224) = #2290224/508:56.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290224 blocks [F: SONY DVD RW DRU-720A]
--------------------------------------------------------------
1:43:19 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4690378752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2290224 | lead-out | 1 | 0x41 | 0x00
1:43:20 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:43:20 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:43:20 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
1:43:20 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:43:20 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
1:43:20 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:43:20 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
1:43:20 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
1:43:20 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
1:43:20 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:44:08 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
13:44:08.656 - F: SONY DVD RW DRU-720A : Queue again later
1:46:58 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 19 C0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0ade0000: Len x10000
0x00 00 01 BA 44 01 5D 20 DC 61 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 80 1A 93 79 69 26 97 CA 42
0x09 05 24 09 73 98 44 02 0E 57 0C 3D 30 0C 30 0C
1:46:58 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
F: SONY DVD RW DRU-720A
1:46:58 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:46:58 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:46:58 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 6591
1:46:58 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 12/24/2005 7:11:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
8. January 2006 @ 15:01 |
Link to this message
|
@Longhorn1
Well your illegal disc error usually means it doesn't like your media.
Quote:
Disc Manufacturer: CMC MA - G. AM3
This stuff is the worst and more than likely the reason. Sometimes it will burn sometimes it won't even from the same spindle.
Both TDK and Memorex use different manufacturers. TDK uses some good ones (not all are good though) while Memorex's are mainly bad. Stick with the good stuff like Taiyo Yuden or Verbatim.
Quote:
Last address to be written: 4473MB
You might want to reduce the target size to 4360 also.
Switch your brand of media and you should be good.
|
AfterDawn Addict
|
8. January 2006 @ 15:50 |
Link to this message
|
Quote:
I have read every post and tried every fix on this topic. I still get Illegal Disk errors when trying to burn both TDK and Memorex DVR-R disks. I have burned both these disks successfully in the past.
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 19 C0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0ade0000: Len x10000
0x00 00 01 BA 44 01 5D 20 DC 61 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 80 1A 93 79 69 26 97 CA 42
0x09 05 24 09 73 98 44 02 0E 57 0C 3D 30 0C 30 0C
1:46:58 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
F: SONY DVD RW DRU-720A
1:46:58 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Try to burn at 4X next time, it's one of the best speed and most recommended for burning. The above error stated that your DRU 720A doesn't like the media you're using.
In addition to what binkie7 had mentioned, even though you may have had success at burning with TDK and CMC MAG in the past, it doesn't mean you'll have a successful on every burns. CMC MAG is one of the worst media in the market (extremely inferior), it has some of the cheapest dye.
No offense here alright and I really mean it, but I despise CMC MAG and I will never ever waste a single penny on them crap media period. The only media I recommend is genuine Taiyo Yuden, Verbatim "advanced azo/datalife plus" and Maxell (mij by Hitachi), thest are top notch aka high quality media.
Good luck!!
This message has been edited since posting. Last time this message was edited on 8. January 2006 @ 15:53
|
|
Longhorn1
Newbie
|
9. January 2006 @ 20:42 |
Link to this message
|
Thanks for the quick replies. I went out and bought the Verbatim media you recommended. Still illegal disk error! Could it be my burner? Below is the log.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-720A> Version: JY07 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6L250R0 BAH4 iteraid Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-720A F: CDRom0
LITEON DVD-ROM LTD163 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 492MB (504096kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2006
UDF/ISO compilation
8:24:54 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
8:24:54 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
8:24:54 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:24:54 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
8:24:54 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
8:24:54 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
8:24:54 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: SONY DVD RW DRU-720A running
8:24:54 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:24:54 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:24:54 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
8:24:55 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2290223 (508:56.23, 4473MB)
8:24:55 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
8:24:55 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
8:24:55 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:24:55 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2290224 (2290224) = #2290224/508:56.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2290224 blocks [F: SONY DVD RW DRU-720A]
--------------------------------------------------------------
8:24:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4690378752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2290224 | lead-out | 1 | 0x41 | 0x00
8:24:55 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:24:55 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
8:24:55 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
8:24:55 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
8:24:55 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
8:24:55 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:24:55 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
8:24:55 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
8:24:55 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
8:24:55 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:25:37 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
20:25:37.875 - F: SONY DVD RW DRU-720A : Queue again later
8:28:28 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 16 40 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x05540000: Len x10000
0x00 00 01 BA 44 01 36 09 8C 81 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 89 06 81 EF CA C4 26 FD 9F
0xBF 5C 00 78 42 1B 97 B0 D5 AB 9F 48 48 13 57 70
8:28:28 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
F: SONY DVD RW DRU-720A
8:28:28 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:28:28 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:28:28 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 5695
8:28:28 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 12/24/2005 7:11:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Longhorn1
Newbie
|
9. January 2006 @ 20:47 |
Link to this message
|
|
Also... forgot to mention. On the dropdown list for write speed, 4X was not available. 6X was the slowest option.
|
|
