|
|
|
Nero Playing Up
|
|
|
boong
Junior Member
|
9. January 2006 @ 09:47 |
Link to this message
|
|
Ok here's how the story starts:
I created and burnt a dvd properly before, but on the disc it was a bit skippy at some points. I am not sure what it is, but I put another dvd disc in, but this time i told Nero to do a simulation, and I tried it at 2 different speeds, high and low (the log i have below is for the fastest speed). After the simulation reached 100%, it said 'Burn process failed at *whatever the speed was*.'
All I had was this log that I have no idea of figuring out on my own. Nero didn't tell me what went wrong with the burn, but I think it may be something to do with the program, not the discs I'm using, because it hadn't even reached the point of burning it to a disc before it said failed.
I guess if someone is going to help me I need a question; how can I fix this problem?
Before you look at the log, I am guessing this part might be the immediate problem:
6:38:59 AM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
Invalid field in command
6:38:59 AM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
Invalid track info
Here is the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552 D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 135MB (138944kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.1.2006
UDF/ISO compilation
6:35:04 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
6:35:04 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
6:35:04 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:35:04 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
6:35:04 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
6:35:04 AM #6 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H552B running
6:35:04 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:35:04 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:35:04 AM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
6:35:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 969199 (215:22.49, 1892MB)
6:35:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)
6:35:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
6:35:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:35:05 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 969200 (969200) = #969200/215:22.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
6:35:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
969200 | lead-out | 1 | 0x00 | 0x41
6:35:05 AM #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
6:35:05 AM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
6:35:05 AM #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
6:35:05 AM #19 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 8x (11,080 KB/s)
6:35:05 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:35:05 AM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:09,927 (189927ms) -> OK
6:35:05 AM #22 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
6:35:05 AM #23 Text 0 File Mmc.cpp, Line 20453
Set BUFE: Super Link -> ON
6:35:05 AM #24 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
6:35:05 AM #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:35:12 AM #26 Text 0 File Cdrdrv.cpp, Line 1294
06:35:12.203 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later
6:38:47 AM #27 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks
6:38:47 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:38:47 AM #29 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 969199
6:38:58 AM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:38:58 AM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:38:58 AM #32 Phase 33 File dlgbrnst.cpp, Line 1845
Simulation completed successfully at 8x (11,080 KB/s)
6:38:59 AM #33 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
6:38:59 AM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:38:59 AM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
Invalid field in command
6:38:59 AM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
Invalid track info
6:38:59 AM #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:38:59 AM #38 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 4/06/2004 1:36:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 4/06/2004 1:37:30 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 4/06/2004 1:40:42 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 9. January 2006 @ 09:51
|
|
Advertisement
|
 |
|
|
|
boong
Junior Member
|
9. January 2006 @ 11:30 |
Link to this message
|
|
I'm really anxious for a reply has anybody thought of a solution yet?
|
Senior Member
|
9. January 2006 @ 12:08 |
Link to this message
|
It seems something is interfering with the burn. May be incd I reccomend removing it via Nero clean tools. May also be that d347prt.sys imulation driver. First thing to try is get enditall2 and run it before burning to end processes. If that helps the burn then look into removing one or both of those. I say if you dont use packet writing its best to remove incd anyway.
|
|
boong
Junior Member
|
9. January 2006 @ 21:58 |
Link to this message
|
|
Ok thanks mate I'll give it a try and I'll get back to you with the results :)
|
|
boong
Junior Member
|
9. January 2006 @ 23:02 |
Link to this message
|
|
Crap it didn't work, I used that enditall2 tool, burn thingy didn't work. I disabled the emulation drive from Daemon Tools, I uninstalled InCD with the Clean Tools thing, and it didn't work. Should I try using another burning program to rule out the fact that its not my hardware? Can you recommend a good one?
BTW heres the last log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552 D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 138MB (141808kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.1.2006
UDF/ISO compilation
7:36:05 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
7:36:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
7:36:05 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:36:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
7:36:05 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
7:36:05 PM #6 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H552B running
7:36:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:36:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:36:05 PM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
7:36:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 969199 (215:22.49, 1892MB)
7:36:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)
7:36:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
7:36:05 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:36:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 969200 (969200) = #969200/215:22.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
7:36:05 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
969200 | lead-out | 1 | 0x00 | 0x41
7:36:05 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
7:36:05 PM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
7:36:05 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
7:36:05 PM #19 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 8x (11,080 KB/s)
7:36:06 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:36:06 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:09,927 (189927ms) -> OK
7:36:06 PM #22 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
7:36:06 PM #23 Text 0 File Mmc.cpp, Line 20453
Set BUFE: Super Link -> ON
7:36:06 PM #24 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
7:36:06 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:36:22 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
19:36:22.968 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later
7:39:57 PM #27 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks
7:39:57 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:39:57 PM #29 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 969199
7:40:09 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:40:09 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:40:09 PM #32 Phase 33 File dlgbrnst.cpp, Line 1845
Simulation completed successfully at 8x (11,080 KB/s)
7:40:10 PM #33 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
7:40:10 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:40:10 PM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
Invalid field in command
7:40:10 PM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
Invalid track info
7:40:10 PM #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:40:10 PM #38 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 4/06/2004 1:36:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 4/06/2004 1:37:30 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 4/06/2004 1:40:42 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 9. January 2006 @ 23:05
|
Senior Member
|
9. January 2006 @ 23:23 |
Link to this message
|
TSSTcorp CD/DVDW what make is your DVD-RW ? have you burned a dvd before
with out any problems never heard of that make of DVD-RW.......
|
Senior Member
|
9. January 2006 @ 23:30 |
Link to this message
|
Quote:
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
This is an imulation isnt it?
Quote:
Physical memory : 511MB (523744kB)
Free physical memory: 138MB (141808kB)
Memory in use : 72 %
This tells me you still have a lot runing in background. Did you click the skull and crossbones in enditall2?
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 4/06/2004 1:36:50 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 4/06/2004 1:37:30 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 4/06/2004 1:40:42 PM (InCD4 driver for win NT/2K/XP)
This say incd is not uninstalled.
Quote:
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src)
Isnt that a driver for a cd imulation?
This message has been edited since posting. Last time this message was edited on 9. January 2006 @ 23:31
|
|
boong
Junior Member
|
9. January 2006 @ 23:56 |
Link to this message
|
|
Hmm I have no idea what happened I'll try it again
And yeah I have burnt a DVD with it before it is a DVD writable drive
|
|
boong
Junior Member
|
10. January 2006 @ 00:06 |
Link to this message
|
Ok same problem, but I noticed when I was watching the Remaining Time section, it came down to 0 seconds, but there was still like 20% left, dunno if this really matters but yeah. Here's the new log, I think everything is gone.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CD/DVDW TS-H552B>Version: TS11 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H552 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 215MB (221140kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.1.2006
UDF/ISO compilation
8:58:50 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
8:58:50 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
8:58:50 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:58:50 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
8:58:50 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
8:58:50 PM #6 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H552B running
8:58:50 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:58:50 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:58:50 PM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:58:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 969199 (215:22.49, 1892MB)
8:58:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)
8:58:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
8:58:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:58:51 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 969200 (969200) = #969200/215:22.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 969200 blocks [TSSTcorp CD/DVDW TS-H552B]
--------------------------------------------------------------
8:58:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1984921600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
969200 | lead-out | 1 | 0x00 | 0x41
8:58:51 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:58:51 PM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:58:51 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:58:51 PM #19 Phase 32 File dlgbrnst.cpp, Line 1845
Simulation started at 8x (11,080 KB/s)
8:58:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:58:52 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:09,927 (189927ms) -> OK
8:58:53 PM #22 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
8:58:53 PM #23 Text 0 File Mmc.cpp, Line 20453
Set BUFE: Super Link -> ON
8:58:53 PM #24 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
8:58:53 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:58:59 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
20:58:59.937 - TSSTcorp CD/DVDW TS-H552B\H1 T0 : Queue again later
9:02:34 PM #27 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 969200 (EC9F0h), lenght 0 blocks
9:02:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:02:34 PM #29 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 969199
9:02:46 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:02:46 PM #31 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:02:46 PM #32 Phase 33 File dlgbrnst.cpp, Line 1845
Simulation completed successfully at 8x (11,080 KB/s)
9:02:47 PM #33 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
9:02:47 PM #34 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:02:47 PM #35 CDR -1066 File ThreadedTransferInterface.cpp, Line 1586
Invalid field in command
9:02:47 PM #36 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1586
Invalid track info
9:02:47 PM #37 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:02:47 PM #38 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 6/01/2006 2:22:03 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 11:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
boong
Junior Member
|
10. January 2006 @ 02:26 |
Link to this message
|
Can someone suggest a burning program other than Nero that I can test my burner out on just to make sure its only Nero with the problem, not my drive?
|
Senior Member
|
10. January 2006 @ 07:15 |
Link to this message
|
|
Dvd Decrypter its free aswell ......Top Dog.....
|
|
Advertisement
|
|
|
|
boong
Junior Member
|
11. January 2006 @ 08:22 |
Link to this message
|
thx killalot ^
I tried burning with Nero again, the simulation says its failed at 100%, so I was thinking the final processes at 100% is what it is failing. Does anyone know what its final processes at the end of the burn is? If someone can list them all including like 'stopping laser' or whatever then i can start to cancel out on a smaller list of possibilities and maybe solve the issue? If for nothing else just for interest and just broadening knowledge on this program I guess lol.
As well as this, although the simulation didn't work, I tried just simply burning to a disc without a simulation prior to the burn, and it worked. It got to 100% and said it successfully burnt, like it did last time I burnt to disc. The difference this time was that I didn't get any frame skipping, and I don't know off hand anything different I did this time, but I know that InCD isn't present in the burning process anymore, because I removed it. So I guess the major problem solved, probably luck of the draw. But if anyone wants to investigate the simulation issue for future issues, I'd be glad to work on fixing it :).
Thanks guys
|
|
