Nero Failing To Write To DVD+R's

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Tuesday 26.11.2024 / 14:37

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > nero failing to write to dvd+r's

Browse by topic

Forums

Start a new thread

Nero Failing To Write To DVD+R's

Jump to:

Posted

Message

mckay5j79

Newbie

11. January 2006 @ 13:03

Link to this message

hi..

i've experienced alot of trouble recently when trying to back up my DVD's.. i'm using the following equipment: Compaq Presario 2100 Notebook, 512mb RAM, 40Gb HDD, Toshiba SD-R6252 DVD+R/RW, Firmware v1A14, 2MB Buffer, Nero v6.6.0.18, DVD Shrink v3.2, Rytek DVD+R's.

For a long time i didn't experience any trouble (a little at the start till i found a media that the burner seemed happy with), but now it refuses to burn ANY DVD!! CD's are fine but it will not burn DVD's..

I was using Nero v6.0 and old firmware but after reading a few posts on here i upgraded them to the current versions (even tried the trial of Nero 7 but it just seemed to suck the life out of my system) and as Nero Info Tool was reporting 'n/a' for 2 of my systems ASPI files i used Force ASPI to correct that, then thinking that maybe the DVD burner had packed in i even resorted to trying a new burner (same type and model), but still no success...

so i'm at my wits end!

i've attached the error report from my last attempt to burn using the original DVD Burner..
any help would be graciously recieved!!

thanx
Tom

-------------------------------------------------------------------

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

Recorder: <TOSHIBA ODD-DVD SD-R6252>Version: 1A14 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA ODD-DVD SD-R6252>Version: 1A14 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST94011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-R6252 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TOSHIBA ODD-DVD SD-R6252 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (457200kB)
Free physical memory: 129MB (132992kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.1.2006
UDF/ISO compilation
22:30:34 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

22:30:34 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

22:30:34 #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:30:34 #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

22:30:34 #5 Text 0 File Reader.cpp, Line 127
Reader running

22:30:34 #6 Text 0 File Writer.cpp, Line 122
Writer TOSHIBA ODD-DVD SD-R6252 running

22:30:35 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

22:30:35 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

22:30:35 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

22:31:03 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

22:31:03 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

22:31:03 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TOSHIBA ODD-DVD SD-R6252, Media type: DVD+R

22:31:03 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

22:31:03 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TOSHIBA ODD-DVD SD-R6252]
--------------------------------------------------------------

22:31:03 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TOSHIBA ODD-DVD SD-R6252] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

22:31:03 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

22:31:03 #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

22:31:03 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

22:31:03 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

22:31:03 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:31:03 #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AD0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

22:31:03 #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

22:33:17 #23 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04450000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0x3A 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

22:33:17 #24 CDR -1135 File Writer.cpp, Line 311
Write error

22:33:18 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

22:33:18 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

22:33:18 #27 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

22:33:18 #28 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

22:33:18 #29 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

22:33:18 #30 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

22:33:18 #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ + quote]

Compaq Presario 2100 Notebook, 512mb RAM, 40Gb HDD, Toshiba SD-R6252 DVD+R/RW, Firmware v1A14, 2MB Buffer, Nero v6.6.0.18, DVD Shrink v3.2

mckay5j79

Newbie

11. January 2006 @ 13:58

Link to this message

below is a link of the actual disks i am using:

DVD+R-in-50-Tub.-pr-18074.html" class="korostus" target="_blank">http://www.ukdvdr.co.uk/shop/8x-Ridisc-Full-Face-Printable-DVD+R-...

thanx again
Tom.

[ + quote]

Compaq Presario 2100 Notebook, 512mb RAM, 40Gb HDD, Toshiba SD-R6252 DVD+R/RW, Firmware v1A14, 2MB Buffer, Nero v6.6.0.18, DVD Shrink v3.2

Bigfatboy

Member

11. January 2006 @ 14:52

Link to this message

well your log looks pretty good but these two

Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

set your target size to 4300 or 4350 in dvdshrink or other program

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

22:33:17 #24 CDR -1135 File Writer.cpp, Line 311
Write error

you should try different media, quality media is a must, good choices are verbatim and taiyo yuden

peace

[ + quote]

This message has been edited since posting. Last time this message was edited on 11. January 2006 @ 14:52

mckay5j79

Newbie

11. January 2006 @ 17:05

Link to this message

Thanx for your suggestions..

i have always used the same size setting in DVD Shrink and the burning process isn't even getting close to the edge of the disc.. usually only 30%-50% but i'll decrease the size a little just in case..

as for the media i had always been told that DVD's using Ritek dye are one of the best around and like i say i've used these discs MANY times before (over 100 successful burns).. is it possible that i have been sold fake discs?? there is no branding on the DVD's as they are inkjet printables except for a long number around the centre hole.. these are different for every disc eg V1-02CH1507028876B19 so i assume they are just a serial number used by the production company?? once again here is a link for the product that i bought..

DVD+R-Full-Face-PRINTABLE-8x-pack-of-50-pr-17672.html" class="korostus" target="_blank">http://www.ukdvdr.co.uk/shop/Ritek-DVD+R-Full-Face-PRINTABLE-8x-p...

i dug out some old Datasafe 4x DVD+R's and successfully burned 2 of them tonight! these were the discs i used before switching to the printable versions but had to give up on, as i DETEST sticky labels..

any more help on this matter from anyone would be GREATLY appreciated!!

thanx
tom

[ + quote]

Compaq Presario 2100 Notebook, 512mb RAM, 40Gb HDD, Toshiba SD-R6252 DVD+R/RW, Firmware v1A14, 2MB Buffer, Nero v6.6.0.18, DVD Shrink v3.2

Bigfatboy

Member

11. January 2006 @ 18:19

Link to this message

the reason i suggested to decrease the target size, and change media is your firmware is up to date but it was last updated in december of 2004. i have also read people like ritek but your burner seems not to.

go here to check firmware - http://forum.rpc1.org/dl_firmware.php?download_id=1902

peace

[ + quote]

MaxBurn

Senior Member

12. January 2006 @ 02:01

Link to this message

Media can make the difference.

Quote:
dug out some old Datasafe 4x DVD+R's and successfully burned 2 of them tonight!

Some ppl love Ritek, but i have seen many logs of failed burns with Ritek right in the middle of it. This media seems to either work great, or fail miserably. Try some GOOD media like Verbs, Sony, Fuji, Maxell, last 3 made in japan to eliminate media as being the offender. Although your Datasafe seems to have pointed out Ritek being bad for you in this case.

[ + quote]

Die CMC Mag!!!

mckay5j79

Newbie

12. January 2006 @ 02:27

Link to this message

cheers guys.. found somewhere that stocked printable datasafe disks and i'm gonna try a few of them... fingers crossed that if they worked once they should again!!!

thanx
tom

[ + quote]

Compaq Presario 2100 Notebook, 512mb RAM, 40Gb HDD, Toshiba SD-R6252 DVD+R/RW, Firmware v1A14, 2MB Buffer, Nero v6.6.0.18, DVD Shrink v3.2

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.