|
|
|
burn failed
|
|
|
bobyboy
Suspended due to non-functional email address
|
17. January 2006 @ 02:23 |
Link to this message
|
|
hi can any one help for the last two years ive been burning vcd in nero 6 but over the last week or so evry time i start to burn nero goes for about 30 secs then syas burn failed. please help
|
|
Advertisement
|
 |
|
|
|
gear79
Suspended permanently
|
17. January 2006 @ 05:38 |
Link to this message
|
lets start with a few basics...
what burner do you use?
what media do you use?
what speeds are you burning at?
is the firmware up to date?
is Nero up to date?
how fast are you bunring?
whats the disk limit you are burning at?
help me help you... do you have an error log to post?
1rst. sig compiled by phantom69 |
Moderator
1 product review
|
17. January 2006 @ 06:29 |
Link to this message
|
|
|
bobyboy
Suspended due to non-functional email address
|
19. January 2006 @ 02:25 |
Link to this message
|
|
hiya i dont have a log at the moment my burner is goldstar the speed i burn is 4. its not a dvd burner only cd the cds i use are maxwell ill post a log once i get one thx
|
|
bobyboy
Suspended due to non-functional email address
|
20. January 2006 @ 06:05 |
Link to this message
|
|
here is the log
|
|
Jeanc1
Suspended permanently
|
20. January 2006 @ 06:31 |
Link to this message
|
|
<<looks>> MMMMMMMmmmmmmmmm ! dont see your log !
Have a great day -- Copy/paste in the text window of your post !
|
|
bobyboy
Suspended due to non-functional email address
|
20. January 2006 @ 07:38 |
Link to this message
|
|
heres the log hope it helps
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
Recorder: <GoldStar CD-RW CED-8120B>Version: 2.00 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <GoldStar CD-RW CED-8120B >Version: 2.00 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400AB-22CMB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : GoldStar CD-RW CED-8120B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
GoldStar CD-RW CED-8120B E: CDRom0
SCSIVAX DVD/CD-ROM D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 52428800 (52428800) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 13MB (14292kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.1.2006
Video CD
16:08:20 #1 Text 0 File VCDDoc.cpp, Line 1387
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Disable
Picture in separate folder : FALSE
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL
CURCOL=YELLOW
PSDCURCOL=RED
PSDCURSHAPE=ARROW
CENTRTRACK=2
AUTOPLAY=AUTO_ON
DUALCHAN=DUAL_ON
TIMECODE_X=64
TIMECODE_Y=100
LOTID_X=64
LOTID_Y=64
ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)
16:08:20 #2 Phase 82 File dlgbrnst.cpp, Line 1832
Encoding video
16:08:21 #3 Text 0 File VCDCompilationImpl.cpp, Line 514
Using Nero Video Converter version 0.00
16:09:02 #4 Text 0 File AVIVCDFileItem.cpp, Line 912
Encoding C:\Documents and Settings\robert\Desktop\Celine Dion - The Colour of My Love Concert (1995)\Celine Dion - The Colour of My Love Concert (1995).avi to C:\DOCUME~1\robert\LOCALS~1\Temp\NER13.tmp
ScalingType: 0 Video: yes Audio: yes
File size: 491621376 bytes
Resolution: 352x264 29.97 Hz
Frames: 119759
16:09:02 #5 Text 0 File AVIVCDFileItem.cpp, Line 925
Playing time: 3995.960000 s
Requested rate: 225 KB/s
iVideoRate=0
iAudioRate=32
Estimated size: 299779 blocks
16:39:30 #6 Text 0 File AVIVCDFileItem.cpp, Line 990
Encoding done
16:41:22 #7 Text 0 File VCDFileItem.cpp, Line 437
Actual size: 299719 blocks
16:41:22 #8 Text 0 File VCDFileItem.cpp, Line 441
The generated Video file is 0.999700 of the evaluated size
16:41:24 #9 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:41:24 #10 Text 0 File VCDDoc.cpp, Line 2865
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------
16:41:25 #11 Text 0 File Reader.cpp, Line 127
Reader running
16:41:25 #12 Text 0 File Writer.cpp, Line 122
Writer GoldStar CD-RW CED-8120B running
16:41:25 #13 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:41:25 #14 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
16:41:25 #15 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using CD-R/RW media
16:41:26 #16 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 301068 ( 66:56.18)
16:41:26 #17 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
16:41:26 #18 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: GoldStar CD-RW CED-8120B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
16:41:26 #19 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:41:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1110 (1110) = #1110/0:14.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1110 blocks [GoldStar CD-RW CED-8120B]
1: TRM_DATA_MODE2_2336 (Celine Dion - The Colour of My Love Concert (1995))
2 indices, index0 (150) not provided
original disc pos #0 + 299809 (299809) = #299809/66:37.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 299809 blocks [GoldStar CD-RW CED-8120B]
--------------------------------------------------------------
16:41:26 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [GoldStar CD-RW CED-8120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 2963520, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 2963520 3316320 708467088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1110 | 2 | 0 | 0x41 | 0x00
1260 | 2 | 1 | 0x41 | 0x00
301069 | lead-out | 1 | 0x41 | 0x00
16:41:26 #22 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
16:41:27 #23 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
16:41:27 #24 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
16:41:27 #25 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
16:41:27 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:41:27 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1260
16:43:24 #28 Text 0 File WriterStatus.cpp, Line 116
<GoldStar CD-RW CED-8120B > start writing Lead-Out at LBA 301069 (4980Dh), lenght 0 blocks
16:43:24 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
16:43:24 #30 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 37.2x (5,588 KB/s)
16:43:24 #31 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (600 KB/s)
16:43:24 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:43:24 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1260
16:43:24 #34 Text 0 File Mmc.cpp, Line 16847
StartDAO : CD-Text - Off
16:43:25 #35 Text 0 File Mmc.cpp, Line 17134
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 10 3c
41 02 01 21 00 00 12 3c
41 aa 01 34 00 42 38 13
16:43:33 #36 Text 0 File Cdrdrv.cpp, Line 1288
16:43:33.593 - GoldStar CD-RW CED-8120B\H1 T1 : Queue again later
17:00:48 #37 Text 0 File WriterStatus.cpp, Line 116
<GoldStar CD-RW CED-8120B > start writing Lead-Out at LBA 301069 (4980Dh), lenght 0 blocks
17:00:48 #38 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:01:20 #39 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (600 KB/s)
17:01:21 #40 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
17:01:21 #41 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:01:21 #42 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1260
17:01:21 #43 Text 0 File Mmc.cpp, Line 16847
StartDAO : CD-Text - Off
17:01:21 #44 Text 0 File Mmc.cpp, Line 17134
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 10 3c
41 02 01 21 00 00 12 3c
41 aa 01 34 00 42 38 13
17:01:38 #45 SCSI -1119 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00
17:01:38 #46 CDR -1119 File Writer.cpp, Line 311
Track following error
17:01:38 #47 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:01:39 #48 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
17:01:40 #49 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)
17:01:41 #50 Text 0 File AVIVCDFileItem.cpp, Line 1054
Temporary file C:\DOCUME~1\robert\LOCALS~1\Temp\NER13.tmp deleted
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 11:33:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 23. January 2006 @ 02:26
|
Moderator
1 product review
|
20. January 2006 @ 07:49 |
Link to this message
|
Please remove your serial #, it begins with 1A23 and is at the top of your post.
Quote:
Physical memory : 255MB (261616kB)
Free physical memory: 13MB (14292kB)
Memory in use : 94 %
You barely have any memory left to do anything, free up some resources and no multitasking. *slap on wrist*
Quote:
Nero Version: 6.6.0.15
Nero is a little behind, current version is 6.6.0.18 and can be found here: Nero.com/nero6/enu/nero-up.php" class="korostus" target="_blank">http://ww2.Nero.com/nero6/enu/nero-up.php
You need packets 1 and 2, omit the InCD packet.
Quote:
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Your burner doesnt' like your media.
Quote:
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : GoldStar CD-RW CED-8120B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
DMA needs to be on for all drives, fix via this guide: http://www.burstcopy.com/dma/xp/
Quote:
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
As far as DVD's go CMC discs are at the bottom of the heap, but I'm not sure about CD-R's.
Quote:
Recorder: <GoldStar CD-RW CED-8120B>Version: 2.00 - HA 1 TA 1 - 6.6.0.15
If this drive came in a compaq, it is one update behind, current version is 2.01....you can get the update if needed here: http://forum.rpc1.org/dl_firmware.php?download_id=533
|
|
gear79
Suspended permanently
|
20. January 2006 @ 08:42 |
Link to this message
|
|
LOCO beat me to it...
try what he suggests and then reply back.. and yes, edit your serial # out..
1rst. sig compiled by phantom69
|
|
bobyboy
Suspended due to non-functional email address
|
23. January 2006 @ 01:09 |
Link to this message
|
|
sorry how do you free up space on the memory
|
AfterDawn Addict
|
23. January 2006 @ 02:07 |
Link to this message
|
|
Close down all progs when you are burning, that is all unnecessary progs.
Also go to pen and paper icon on top right of page and edit out your serial no. and then hit save changes. I would also recommend you spend a few $$$ and install another stick of RAM...at least 256.
|
|
bobyboy
Suspended due to non-functional email address
|
23. January 2006 @ 02:36 |
Link to this message
|
|
thx ill try everything good hunting lol
|
|
bobyboy
Suspended due to non-functional email address
|
2. February 2006 @ 03:51 |
Link to this message
|
|
hi still cant get it burnning heres my log
edited by ddp
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
Recorder: <GoldStar CD-RW CED-8120B>Version: 2.00 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <GoldStar CD-RW CED-8120B >Version: 2.00 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400AB-22CMB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : GoldStar CD-RW CED-8120B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
GoldStar CD-RW CED-8120B E: CDRom0
PIONEER DVD-ROM DVD-116 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 52428800 (52428800) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 49MB (50968kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.2.2006
Video CD
18:23:20 #1 Text 0 File VCDDoc.cpp, Line 1387
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Disable
Picture in separate folder : FALSE
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL
CURCOL=YELLOW
PSDCURCOL=RED
PSDCURSHAPE=ARROW
CENTRTRACK=2
AUTOPLAY=AUTO_ON
DUALCHAN=DUAL_ON
TIMECODE_X=64
TIMECODE_Y=100
LOTID_X=64
LOTID_Y=64
ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)
18:23:20 #2 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:23:20 #3 Text 0 File VCDDoc.cpp, Line 2865
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------
18:23:20 #4 Text 0 File Reader.cpp, Line 127
Reader running
18:23:20 #5 Text 0 File Writer.cpp, Line 122
Writer GoldStar CD-RW CED-8120B running
18:23:20 #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:23:21 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
18:23:21 #8 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using CD-R/RW media
18:23:21 #9 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359649 ( 79:57.24)
18:23:21 #10 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
18:23:21 #11 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: GoldStar CD-RW CED-8120B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
18:23:21 #12 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:23:21 #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1115 (1115) = #1115/0:14.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1115 blocks [GoldStar CD-RW CED-8120B]
1: TRM_DATA_MODE2_2336 (Avseq01)
2 indices, index0 (150) not provided
original disc pos #0 + 358385 (358385) = #358385/79:38.35
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 358385 blocks [GoldStar CD-RW CED-8120B]
--------------------------------------------------------------
18:23:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [GoldStar CD-RW CED-8120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc not fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 2975280, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 2975280 3328080 846249600, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1115 | 2 | 0 | 0x41 | 0x00
1265 | 2 | 1 | 0x41 | 0x00
359650 | lead-out | 1 | 0x41 | 0x00
18:23:21 #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
18:23:21 #16 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
18:23:21 #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
18:23:21 #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
18:23:21 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:23:21 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1265
18:23:21 #21 Text 0 File Mmc.cpp, Line 16847
StartDAO : CD-Text - Off
18:23:21 #22 Text 0 File Mmc.cpp, Line 17134
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 10 41
41 02 01 21 00 00 12 41
41 aa 01 34 00 4f 39 19
18:23:37 #23 SCSI -1119 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03390000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x00
18:23:37 #24 CDR -1119 File Writer.cpp, Line 311
Track following error
18:23:38 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:23:38 #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
18:23:38 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 11:33:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDRO
This message has been edited since posting. Last time this message was edited on 8. February 2006 @ 16:47
|
|
gear79
Suspended permanently
|
2. February 2006 @ 05:00 |
Link to this message
|
you know, i looked at your log, and then compared them side by side.......
really, you have changed nothing... you have been pointed out what is wrong, but have not done anything to help yourself..
you nero version IS still outdated..
your DMA settings ARE still set to off
you STILL have little to no ram (memory)
you MUST be using a lot of programs while doing your burn, 80% cpu usage is just way too high.
why do yout try to fix a few of those items like told to before and then see what happens... otherwise, your not helping yourself, and quite frankly...wasting our time.
not trying to be mean, but you need to help on your end.
go here to update nero
http://www.nero.com/nero6/enu/nero-up.php
do this to turn DMA on...
1. Under DEVICE MANAGER, open IDE ATA/ATAPI CONTROLLERS.
2. On the PRIMARY and SECONDARY IDE CHANNELS, open up their PROPERTIES display.
3. In PROPERTIES click on the ADVANCED SETTINGS tab.
4. Make sure that TRANSFER MODES is set to DMA IF AVAILABLE. and not PIO.
If any changes were made, reboot your computer.
for your memory, wel, buy another stick of ram, but if you cant, try yto free up as much space as possible, defrag the pc, dump any junk you dont need, close all programs while using nero, anti-virus, fire-walls, screensavers, unplug from the net if on broadband..
try these.. AND I MEAN DO THEM... then get back.
also, you need to delete you serial # from the top...
starts with 1A23 XXXXXXXXXXXXXXXXXXXXXXXXX
1rst. sig compiled by phantom69
This message has been edited since posting. Last time this message was edited on 2. February 2006 @ 05:01
|
|
bobyboy
Suspended due to non-functional email address
|
3. February 2006 @ 02:19 |
Link to this message
|
hiya i have did every thing i was told my dma says its on i try without any prog running ive used Nero 7 without success so i went back to the older version as for my memory when i look in my hard drive it says i have still 18 gb surly thats plenty awaiting your reply as for the serail no i cant seem to delete it
|
|
bobyboy
Suspended due to non-functional email address
|
8. February 2006 @ 07:46 |
Link to this message
|
|
hiya helllllllllllllp still not burning my dma is on . i close all prog before burning . i changed my media . my memory in use is still high 75 perc how to i get more memory
|
|
ddp
Moderator
|
8. February 2006 @ 16:50 |
Link to this message
|
|
buy more ram
|
|
Advertisement
|
|
|
AfterDawn Addict
|
8. February 2006 @ 18:25 |
Link to this message
|
|
To be able to burn successfully you need at least 512 meg of RAM, you only have 256meg so you will always strike problems.
As DDP has suggested, purchase another 256meg stick of RAM and install, that will then give you the required 512 megs. This will most certainly help.
FOOTNOTE
I told you this on 23 january.
This message has been edited since posting. Last time this message was edited on 8. February 2006 @ 18:27
|
|
