DVDs won't burn "illegal disc error"

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Tuesday 26.11.2024 / 18:37

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > dvds won't burn "illegal disc error"

Browse by topic

Forums

Start a new thread

DVDs won't burn "illegal disc error"

Jump to:

Posted

Message

orius

Newbie

18. January 2006 @ 12:55

Link to this message

Hi, I'm very sorry for posting the thread again from scratch, but the last one got took over from other peeps posting their problems on it too.

Everything I burn brings an illegal disc error. I've put the latest firmware on (finally discovered the SONY can be flashed with some Liteons), Nero 7, got rid of the Nforce 4 drivers at last (DMA now shows as on in the log yay), the media im using is also classed as supported at 4x, 6x and 8x by lite-on in the media report that was with the firmware. I've tried burning a smaller file (not an image either) and i got the same end result.

Also it burn CD-Rs fine, and the DVDs when rejected are burned on about 1/5 of the way, even thought it says it only did 1% when burning.

-----
Chris Wilson
None
xxxx

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 16/01/2006 23:26:36
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 3 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDT722516DLAT80 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 5 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230EE atapi Port 5 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S E: CDRom3
SONY CD-RW CRX230EE F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096612kB)
Free physical memory: 1554MB (1592152kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.1.2006
Burn DVD Image
22:38:15 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

22:38:15 #2 Text 0 File Reader.cpp, Line 124
Reader running

22:38:15 #3 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-1673S running

22:38:15 #4 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

22:38:15 #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286006 (508:00.06, 4464MB)

22:38:15 #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD DVD)

22:38:15 #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R
Disc Manufacturer: TTG02 -
Disc Application Code: 64, Disc Physical Code: 193

22:38:15 #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:38:15 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286007 (2286007) = #2286007/508:0.7
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286007 blocks [E: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------

22:38:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681742336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286007 | lead-out | 1 | 0x41 | 0x00

22:38:15 #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

22:38:15 #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

22:38:15 #13 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

22:38:15 #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

22:38:15 #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)

22:38:15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

22:38:15 #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

22:38:15 #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

22:38:15 #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

22:38:15 #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

22:38:46 #21 Text 0 File Cdrdrv.cpp, Line 1197
22:38:46.625 - E: LITE-ON DVDRW SOHW-1673S : Queue again later

22:42:33 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 05 A0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x034d0000: Len x10000
0x00 00 01 BA 44 01 0C BB 6D AD 01 89 C3 F8 00 00
0x01 E0 00 CC 81 00 00 46 18 6E 34 68 D1 86 1B 8D
0x1A 34 61 86 E3 46 8D 18 61 B8 D1 A3 46 18 6E 34

22:42:33 #23 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: LITE-ON DVDRW SOHW-1673S

22:42:33 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

22:42:33 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

22:42:33 #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1439

22:42:33 #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 21/11/2005 23:27:40 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[ + quote]

This message has been edited since posting. Last time this message was edited on 18. January 2006 @ 13:10

MaxBurn

Senior Member

19. January 2006 @ 00:29

Link to this message

Not too much wrong in that log. Here is one thing:

Quote:
Nero Version: 7.0.1.2

It is now up to 7.0.1.4b so an update might help.
http://www.nero.com/nero7/enu/nero7-up.php

Quote:
Last address to be written: 2286006 (508:00.06, 4464MB)

You are burning too close to the edge of the disc. Change the target size to Custom 4300, the setting is in Nero and Shrink under burn settings.

Quote:
Media type: DVD-R
Disc Manufacturer: TTG02 -

TDK media gives problems for many ppl, and you may be one of them. Try some verbatim or sony, fuji, maxell, last 3 made in japan.
Your firmware is up2date, your DMAs are all on. Can't see much else wrong. Give those things a try, and post back.

[ + quote]

Die CMC Mag!!!

This message has been edited since posting. Last time this message was edited on 19. January 2006 @ 00:29

orius

Newbie

19. January 2006 @ 05:24

Link to this message

ok ill look again. the same error happened with a normal burn with only 2gig so dont think its the edge thing, always burned dvds that small without a problem in the past.

tis leaving me with those dics now, its a bulk pack and all the others worked, so ill be shocked if ive got a massive pile of duds after a good 20 or so were fine to start.

[ + quote]

This message has been edited since posting. Last time this message was edited on 19. January 2006 @ 05:25

orius

Newbie

19. January 2006 @ 10:16

Link to this message

no luck.... ive brought some philips dvd discs and burned a 3gig file, exactly the same error! forgot to save the log tho.

I've tried a DVD-RW I had too Ive used before and that works tho, tried it in cd-dvd speed. dnt get how it can be incompatibile dvds though, how can it accept the ones ive used for ages then not all of a sudden if so?

[ + quote]

This message has been edited since posting. Last time this message was edited on 19. January 2006 @ 10:46

orius

Newbie

19. January 2006 @ 14:23

Link to this message

I got it working!!!! guess what it was???? defragment the hard disk drive...never thought of that in a millio years...

oh well, remember that in case you have the prob for other dudes and firmware etc doesnt fix it. all the media works again now so havent got dud DVDs.

[ + quote]

MaxBurn

Senior Member

19. January 2006 @ 19:36

Link to this message

orius,
I keep forgetting to remind ppl to defrag HD. My suggestion was going to be for you to try GOOD media like Verbatim, but im glad you got it fixed. Seems weird that a fragged HD would give you an illegal disc error, but i've seen stranger things in electronics.
Many happy burns to you!

[ + quote]

Die CMC Mag!!!

orius

Newbie

20. January 2006 @ 02:10

Link to this message

I thought they were! until about 5 min after i posted and realised what they came up as... :( oh well, alls good now at the moment it burned last nite, will try again later.

cheers again!

[ + quote]

Start a new thread

afterdawn.com > forums > software specific discussion > nero discussion > dvds won't burn "illegal disc error"


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.