|
|
|
Failed to burn
|
|
|
yusk
Newbie
|
21. January 2006 @ 03:48 |
Link to this message
|
I'm trying to burn a DVD I make from an AVI file, using WinAVI Video Coverter. What is going wrong?
I use a DVD Recorder connected through USB Serial.
My Log:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Arquivos de programas\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/7/2004 17:33:44
Nero version: 6.3.1.25 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.26 - HA 2 TA 0 - 6.3.1.25
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TDK CDRW401240X >Version: 1t01 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD300AB-00BVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TDK CDRW401240X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TDK CDRW401240X E: CDRom0
_NEC DVD_RW ND-2510A F: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 24MB (25540kB)
Memory in use : 95 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.1.2006
UDF/ISO compilation
22:31:25 #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started
22:31:25 #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)
22:31:25 #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
22:31:25 #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted
22:31:25 #5 Text 0 File Reader.cpp, Line 126
Reader running
22:31:25 #6 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running
22:31:25 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:31:26 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:31:26 #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
22:31:26 #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1882095 (418:14.45, 3675MB)
22:31:26 #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
22:31:26 #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: VANGUA - RD
Disc Application Code: 64, Disc Physical Code: 193
22:31:26 #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:31:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1882096 (1882096) = #1882096/418:14.46
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1882096 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------
22:31:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3854532608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1882096 | lead-out | 1 | 0x00 | 0x41
22:31:27 #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
22:31:27 #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
22:31:27 #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
22:31:27 #19 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2x (2.770 KB/s)
22:31:27 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:31:27 #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:23,838 (1403838ms) -> OK
22:31:27 #22 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
22:31:27 #23 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON
22:31:27 #24 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
22:31:27 #25 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
22:31:27 #26 Text 0 File DVDR.cpp, Line 5588
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:31:27 #27 Text 0 File DVDR.cpp, Line 5588
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:31:27 #28 Text 0 File DVDR.cpp, Line 5588
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:31:27 #29 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM
22:31:27 #30 Text 0 File DVDR.cpp, Line 4818
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
22:31:31 #31 Text 0 File Cdrdrv.cpp, Line 1297
22:31:31.296 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later
22:31:34 #32 SCSI -500 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AA70000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
22:31:34 #33 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
_NEC DVD_RW ND-2510A\H2 T0
22:31:34 #34 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:31:34 #35 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
22:31:34 #36 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1
22:31:51 #37 Text 0 File DVDR.cpp, Line 5588
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:31:51 #38 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0B123000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
22:31:51 #39 Text 0 File DVDR.cpp, Line 5588
Book Type counter: 500, Book Type selected in EEPROM, command version 2
22:31:51 #40 Text 0 File DVDR.cpp, Line 4818
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type
22:31:51 #41 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
22:31:51 #42 CDR -500 File WriterStatus.cpp, Line 164
SCSI command aborted
_NEC DVD_RW ND-2510A\H2 T0
22:31:51 #43 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
22:31:51 #44 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
22:31:51 #45 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2.770 KB/s)
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 17/2/2005 00:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 15/9/2005 04:17:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 10:59:44 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. January 2006 @ 03:49
|
|
Advertisement
|
|
|
|
|
gear79
Suspended permanently
|
21. January 2006 @ 06:01 |
Link to this message
|
a few problems i see at the moment...
Quote:
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
needs to be set to ON
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 24MB (25540kB)
Memory in use : 95 %
you have no memory left and using too much cpu for other things..
you cant muli-task or run any other programs while encoding or burning
Quote:
NEC DVD_RW ND-2510A
needs an update..
go here
http://forum.rpc1.org/dl_firmware.php?download_id=1837
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
you burn is set too close to the edge, back it up to 4300mb
Quote:
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
dont know what that is?
Quote:
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 17/2/2005 00:00:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 15/9/2005 04:17:44 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 10:59:44 (Adapter driver for src)
dont know this either, but windows 2k
see if there is an update for Nero too, looks kinda old..
and what media did you use?
try this,let me know !
1rst. sig compiled by phantom69 |
Moderator
|
21. January 2006 @ 11:51 |
Link to this message
|
@yusk
To add to gear79:
Quote:
Disc Manufacturer: VANGUA - RD
Switch your media - vanguard is some pretty crappy stuff. Use Taiyo Yuden or Verbatim.
Quote:
Media type: DVD-R
Your also have Nero set to booktype. -r's can't be booktyped. While this shouldn't cause a problem it may be w/ Nero.
|
AfterDawn Addict
|
21. January 2006 @ 12:30 |
Link to this message
|
|
Nero 6.6.0.18
|
|
gear79
Suspended permanently
|
21. January 2006 @ 13:13 |
Link to this message
|
|
thanks for looking out binkie... i missed that one...
i am here at work.... was in a hurry !!
1rst. sig compiled by phantom69
|
|
yusk
Newbie
|
21. January 2006 @ 19:36 |
Link to this message
|
I have updated my Nero and followed the instructions(driver update, change media, etc), but i still have the same problem.
Quote:
Quote:
--------------------------------------------------------------------------------
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
--------------------------------------------------------------------------------
needs to be set to ON
How can i set it on?
Well, i'll keep trying. Anyway, THX a lot. I'll be back if i succeed ;)
|
AfterDawn Addict
|
21. January 2006 @ 19:53 |
Link to this message
|
|
If you check this out it should tell you how to turn DMA on.
|
|
yusk
Newbie
|
22. January 2006 @ 05:16 |
Link to this message
|
Looking Nero Info I found that ASPI installation is corrupted (System ASPI).
What does it mean?
|
|
Advertisement
|
|
|
|
gear79
Suspended permanently
|
22. January 2006 @ 11:56 |
Link to this message
|
|
sounds like the driver has taken a dump...
bad burner maybe...
1rst. sig compiled by phantom69
|
|
