|
|
|
nero failure y?????????????
|
|
Member
|
26. January 2006 @ 19:17 |
Link to this message
|
|
hey wen i go to burn a dvd movie or ps2 game it always say
burn progress failed
but there was one time where it axullt burnt properly i hav anydvd
dvd shrink and dvd dycrypter wat more could i possibly need more ram
by any chane i only hav 256mb of ram????
plz help
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
26. January 2006 @ 20:27 |
Link to this message
|
Can you post a Nero log file?
That has the information we need.
256 MB is useable. More is better tho.
There are a variety of reasons Nero could fail. Sometimes it's the media, sometimes it's a fault with the program or you might be doing something wrong.
|
Member
|
27. January 2006 @ 16:23 |
Link to this message
|
|
yer how do i do tht and i did read some where tht i will need atleast 512 mb ram does anyone out there burn dvds with 256mb ram ??
|
Member
|
28. January 2006 @ 23:00 |
Link to this message
|
|
ok i found out how to do a log file and i did one but i didn't try copy a dvd then do it i jus said copy dvd then canceled then took a log fileto show ya here it is
fred k
1A23-5017-4335-5556-5153-6495
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 2/04/2003 8:13:44 AM
Nero version: 6.0.0.0
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.0.0.0
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261524kB)
Free physical memory: 78MB (80128kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2006
===== Disc-Copy over image - 1st step : Copy to image ...
7:57:09 PM #1 SCSI -1081 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x53
Sense Qual: 0x02
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x53 0x02
7:57:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
7:57:12 PM #3 Phase 23 File dlgbrnst.cpp, Line 1818
Reading disc aborted
===== Disc-Copy over image - 2nd step : Burn the image ...
7:57:09 PM #1 SCSI -1081 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x53
Sense Qual: 0x02
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x53 0x02
7:57:12 PM #2 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE
7:57:12 PM #3 Phase 23 File dlgbrnst.cpp, Line 1818
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 4:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
28. January 2006 @ 23:18 |
Link to this message
|
Nero is supposed to run on less but might not work correctly. The first thing you need to do is to update your Nero. Yours is quite a few versions behind.
Also you posted your Nero serial number. You should edit it out.
It's the number that starts with 1a23
After you get updated try an actual burn and post the log from that. That way we can see what error you are getting.
|
Member
|
29. January 2006 @ 00:25 |
Link to this message
|
ok thx haps for tht do u know where to get a new Nero?
|
Member
|
29. January 2006 @ 00:28 |
Link to this message
|
|
dont worry im downlading it afteradawn but when ive installed the new one will i be able to burn properly and will i need new serial or sumthin?
|
Member
|
29. January 2006 @ 03:25 |
Link to this message
|
ok i hav ended up gettin Nero ultra edition and ive got the serial and its all workin goooood
ok i took another log test but do u want me to do alog test wen it comes up with the burn disc fail thing or not cause if i do then tht means there is another disc i hav to watse and i hav read in a few places now tht i need more ram like atleast 512 is there amy one who uses 256mb ram and burns dvds fine???
ok here is the log test thanks for all ur help :}
|
Member
|
29. January 2006 @ 03:28 |
Link to this message
|
ok i hav ended up gettin Nero ultra edition and ive got the serial and its all workin goooood
ok i took another log test but do u want me to do alog test wen it comes up with the burn disc fail thing or not cause if i do then tht means there is another disc i hav to watse and i hav read in a few places now tht i need more ram like atleast 512 is there amy one who uses 256mb ram and burns dvds fine???
ok here is the log test thanks for all ur help :}
..
..
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261524kB)
Free physical memory: 79MB (81588kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.1.2006
===== Disc-Copy over image - 1st step : Copy to image ...
12:18:48 AM #1 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:18:48 AM #2 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:19:03 AM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:19:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
12:19:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
12:19:51 AM #6 Phase 23 File dlgbrnst.cpp, Line 1725
Reading disc aborted
===== Disc-Copy over image - 2nd step : Burn the image ...
12:18:48 AM #1 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:18:48 AM #2 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:19:03 AM #3 SPTI -1065 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04781e00: Len x1008
12:19:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
12:19:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
12:19:51 AM #6 Phase 23 File dlgbrnst.cpp, Line 1725
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
29. January 2006 @ 03:47 |
Link to this message
|
Thats version is needed updating to 7014b.
Quote:
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
12:19:51 AM #6 Phase 23 File dlgbrnst.cpp, Line 1725
Reading disc aborted
Its not recognizing whatever you have in the drive.
Your burner is several versions behind on firmware. Get newest for it here.
http://www.liteonit.com/ODD/WebFW/SOHW-1673S/DR16JS0D.zip
This message has been edited since posting. Last time this message was edited on 29. January 2006 @ 03:50
|
AfterDawn Addict
|
29. January 2006 @ 11:24 |
Link to this message
|
I still don't know what type and brand of media you are using. This can be the cause of the problem.
I'll go over your last log and then try to come up with a procedure to test with.......
The errors on your log are the result of not having a blank inserted and aborting the program. This does give us a bit of information to work with though.
The first thing I see is that firmware for your Lite-on Burner is out of date. Here is rpc1.org's firmware page for this drive:
http://forum.rpc1.org/dl_result.php?kaj=1&isces
The next thing I see is that DMA is off on your DVD-ROM. This will slow the rip process down but not cause a failed burn. I would correct that as soon as possible though.
Here is a guide:
http://www.dvdplusvideo.com/dvdguide005.html
Here is another guide:
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
whompus brought up your new Nero is a bit out of date so you should download the newest version from Nero:
http://nero.com/nero7/enu/nero7-up.php
Your RAM is minimal. If at all possible get more. Nowdays a typical PC used for video work will have 1 GB of RAM for "happy" ripping and burning. I noticed on a previous computer that an increase in ripping speed occurred when I upgraded from 512 MB to 1 GB. I imagine you will see an improvement as well if you can do an upgrade from 256 MB to 512 MB or more.
I doubt your RAM is causing errors though. It is just slowing things down. The programs should still work.
Make sure you eliminate as many programs as possible that are running in the background. For example you can disconnect from the internet and turn off your firewall/antivirus programs.
Lets go over a test procedure so we can get a good simulated burn.
I assume you are familiar enough with Shrink to make a set of video files on your hard drive. We need those to load into Nero to perform the simulation.
I just popped Fantastic 4 into my ROM so I will go through each step.
Insert movie in DVD-ROM.
Open Shrink, select movie.
Shrink analyzes.
Select Re-author.
Drag Title 1 over to the left.
Click Compression Settings tab on right.
Uncheck all audio except AC3 5.1-ch.
Uncheck all Subpicture boxes.
Select Backup!
Change target to "Hard Disk Folder".
Set output to my "Shrink Target" folder on my desktop.
Select OK.
Encoding begins. Decryption Status: Not Encrypted...I have AnyDVD running in the background.
Encoding complete. Time: 8 minutes 44 seconds.
Select OK.
Close Shrink.
That completes making a set of files on the Hard Drive. They are located on my desktop in my Shrink Target folder. The next step is to use Nero to perform a simulated burn.
Open Nero Burning ROM. I have a desktop shortcut so I just click the icon.
Burning ROM opens.
Click the DVD-Video icon on the left. Don't use any other!
Click New, bottom left.
Browse for the movie files, double click my Shrink Target folder.
Double click the Video_ts folder. The files open.
Right click any of the files and select "Select All" from the menu.
Right click the blue files and select "Copy to Compilation".
They are copied to the compilation area on the left.
Place a blank DVD in the burner. I give it a few moments to get spun up.
I note that my burner is selected at the top.
Click the Burn icon at the top.
Action:
Check the Simulation box. Uncheck the rest.
Writing:
Change the write speed to 4X.(I'm using 8X for this simulation. I burn at 4X.)
Number of copies: 1.
Everything else is unchecked.
Click the "Simulate" button to start. It starts.
When it finishes, a Simulation Completed window opens.
Click "Details" and then click "Save Log". Save it to a convenient location.
Select OK and Close Nero.
That completes the simulation. Nothing was written to the blank disc. It does have to be in the burner for the simulation to work.
Here is my simulated burn log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S >Version: DS1E - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y250P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 1 DMA: On
DiskPeripheral : Promise 2+0 Stripe/RAID01.10 fasttx2k Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
PIONEER DVD-RW DVR-109 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 2046MB (2095520kB)
Free physical memory: 1352MB (1385332kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2006
UDF/ISO compilation
12:46:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
12:46:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
12:46:55 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:46:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
12:46:55 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
12:46:55 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:46:55 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: PIONEER DVD-RW DVR-109 running
12:46:55 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:46:56 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:46:56 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
12:46:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2264335 (503:11.10, 4422MB)
12:46:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
12:46:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
12:46:56 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:46:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2264336 (2264336) = #2264336/503:11.11
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264336 blocks [E: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------
12:46:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4637360128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2264336 | lead-out | 1 | 0x41 | 0x00
12:46:56 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:46:56 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
12:46:56 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
12:46:56 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
12:46:56 PM #21 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 8x (11,080 KB/s)
12:47:03 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:47:03 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
12:47:03 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
12:47:03 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
12:47:03 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:47:07 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
12:47:07.843 - E: PIONEER DVD-RW DVR-109 : Queue again later
12:54:33 PM #127 Text 0 File WriterStatus.cpp, Line 116
<E: PIONEER DVD-RW DVR-109> start writing Lead-Out at LBA 2264336 (228D10h), length 0 blocks
12:54:33 PM #128 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:54:33 PM #129 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 2264335
12:54:42 PM #130 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/27/2004 11:42:34 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
So you should be able to complete a simulated burn and we can see a good log file from you. Let me know if I left anything out or if you have a question.
Cheers,
Frank
|
Member
|
29. January 2006 @ 22:11 |
Link to this message
|
is tht dvd region thing exacly like AnyDVD cause if it is i hav AnyDVD and its registed and all??? so do i still need it??
hey frank i hate waiting like everyday to see wat do to next and i hav a few dvds tht ppl want burnt. Do u hav msn or sumthin so i can jus do it all at once if u do hav msn add me my addy is wat_the1800@hotmail.com
|
Member
|
29. January 2006 @ 23:28 |
Link to this message
|
ok i got the new newest Nero and updated my disc drive and i did the other u told me to do and i took a log test and here it is.Should i b able to burn dvds or not??? thank you for ur help frank
.
.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261524kB)
Free physical memory: 85MB (87560kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.1.2006
Burn DVD Image
8:12:00 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 39936KB of Memory
8:12:00 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
8:12:00 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW SOHW-1673S running
8:12:00 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
8:12:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1624435 (360:59.10, 3172MB)
8:12:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
8:12:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
8:12:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
8:12:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1624436 (1624436) = #1624436/360:59.11
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1624436 blocks [D: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
8:12:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3326844928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1624436 | lead-out | 1 | 0x41 | 0x00
8:12:35 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:12:35 PM #12 Phase 32 File dlgbrnst.cpp, Line 1725
Simulation started at 4x (5,540 KB/s)
8:12:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:12:36 PM #14 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession
8:12:36 PM #15 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
8:12:36 PM #16 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
8:12:36 PM #17 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:22:44 PM #18 Text 0 File WriterStatus.cpp, Line 116
<D: LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 1624436 (18C974h), length 0 blocks
8:22:44 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:22:44 PM #20 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 1624431
8:22:52 PM #21 Phase 133 File dlgbrnst.cpp, Line 1725
Writing short lead-out
8:23:42 PM #22 Phase 33 File dlgbrnst.cpp, Line 1725
Simulation completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 2:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
30. January 2006 @ 00:36 |
Link to this message
|
I caint beleave we mised this.
Quote:
DiskPeripheral : WDC WD600AB-60CBA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
DiskPeripheral shows port 0 id 0 so is on primary as master and is right
CdRomPeripheral shows port 1 id 1 so is on secondary but as slave
Is there some other ide device on the secondary ide controller as master and not showing up in the log? If not you should change the jumper on the back of the dvd burner to be master or cs.
|
Member
|
30. January 2006 @ 01:30 |
Link to this message
|
|
what do hav to do ????
|
Senior Member
|
30. January 2006 @ 02:01 |
Link to this message
|
You will most likely have to remove the drive from the computer to get access to the jumper. Then change the tab from sl, to ma or cs. I suggest ma as it seems to work better that way.
The jumper will look like this
|
Member
|
30. January 2006 @ 19:35 |
Link to this message
|
|
ok then i can do tht its jus i would like to know y i hav to do this 4 ???
|
Senior Member
|
30. January 2006 @ 19:55 |
Link to this message
|
|
Because if it is on the secondary channel as your log points to. With port 1 and id being 1 instead of 0 that suggest it is jumpered as slave. Your log also does not point to anything else being on the secondary port. Therefor it will never work right with the current settings. With it being the only device on the channel it has to be set as ma (master/single drive) or cs (cable select). The slave setting (which most come from factory set as) is to be put on a channel with another device already on it as master.
|
Member
|
30. January 2006 @ 20:28 |
Link to this message
|
|
wel i cant do tht cause i gotta like take the whole computer to pices cause its screwed into this bit i cant get to and does tht mean i wont b able to burn dvds
|
Senior Member
|
30. January 2006 @ 21:57 |
Link to this message
|
|
Well if it is not set right you will keep having problems. I notice you said at one time it burned ok. That seems to mean it may be set to cs but for whatever reason now it is being picked up as port 1 id 1 which means it is picking it up as second drive on secondary controller. Cs seems to only work ok on a regular basis if there are 2 drives set to cs on the same controller.
|
Member
|
30. January 2006 @ 22:28 |
Link to this message
|
|
well i wonder y the guy who set my dvd burer up didn't do tht then cause he was like a full nerd
|
Senior Member
|
30. January 2006 @ 22:32 |
Link to this message
|
|
Maybe he has more faith in cs then I do. I dont know about nerd but I have no faith in cs at all. If you where in South Alabama I would say bring it into my shop for me to look at.
|
Member
|
30. January 2006 @ 23:23 |
Link to this message
|
|
oh ok then thx for all ya help but do u know how much it would cost for me to get this dvd burner done and how much its gonna cost for 512 of ram ??
|
Member
|
30. January 2006 @ 23:32 |
Link to this message
|
|
and wat does tht does tht dvd region + css free do ?
and by the way i dont live where u live i liv in australia
|
|
Advertisement
|
|
|
Senior Member
|
30. January 2006 @ 23:37 |
Link to this message
|
|
I am not sure what the price would be down under. Should not be much. Most likely just a benchmark fee because all thats needed from the way it sounds is a jumper or connection changed, the price of memory is not much also but will depend on what type your system uses.
The dvd region + css free removes region and copy protections. Much like anydvd does. I reccomend anydvd myself. I have never used region + css free so I can not say for sure how good it is. I do use anydvd and can say it is great.
You should be able to install memory and change the drive jumper or connection yourself. If you are not comfortable doing it take the system to a local shop and they should do both for you fairly cheep.
This message has been edited since posting. Last time this message was edited on 30. January 2006 @ 23:41
|
|
