|
I have been using nero 7 to burn movies with out a problem until now, I noticed my Aspi (I think that's what it's called)needed to be updated so I did that and still it didn't work so I checked the forums and read there were problems with nero 7 so I switched back to nero 6 but seem to be having the same problem. My dvd burner combo will read cd and dvd as well as burning cds, however when it comes to dvds I keep getting the message failed and it says something about not being able to use disc at once I don't really know much about nero. I have seen ppl post their logs so I hope this is what is needed.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <COMPAQ CD-ROM LTN403 >Version: DQ19 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST313620A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 90841U2 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ CD-ROM LTN403 atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
COMPAQ CD-ROM LTN403 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 126MB (129584kB)
Free physical memory: 18MB (18792kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.1.2006
UDF/ISO compilation
9:27:12 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
9:27:13 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
9:27:13 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:27:13 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
9:27:13 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 23552KB of Memory
9:27:13 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:27:13 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:27:13 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:27:13 PM #9 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
9:27:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2286159 (508:02.09, 4465MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
9:27:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
9:27:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
9:27:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:27:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [E: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
9:27:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 2 | 0 | 0x41 | 0x00
0 | 2 | 1 | 0x41 | 0x00
2286160 | lead-out | 1 | 0x41 | 0x00
9:27:14 PM #16 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:27:14 PM #17 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
9:27:14 PM #18 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
9:27:14 PM #19 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
9:27:15 PM #20 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)
9:27:15 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:27:15 PM #22 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
9:27:15 PM #23 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
9:27:15 PM #24 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
9:27:15 PM #25 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 25E24F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:27:15 PM #26 SPTI -1066 File SCSIPassThrough.cpp, Line 323
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x53 00 00 00 00 00 22 E2 50 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05
9:27:15 PM #27 CDR -1066 File ThreadedTransferInterface.cpp, Line 1799
Invalid field in command
E: HL-DT-ST DVDRAM GSA-4163B
9:27:15 PM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
9:27:15 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have also noticed that many ppl seem to be having problems with this type of dvd writer. I hope someone can help me with this problem. I hope this is were I should have posted. Thanks in advance for any help.
|
